spare parts for the Trabant front axle left and right hand

The product category Trabant 601 > Spare parts > Front axle > steering knuckles & wishbone is spread over 5 sites:

Sealing ring for spring yoke, Germany

Rubber sealing ring to protect the bearing (connection between spring yoke and bushing) against dust and moisture.
This new produced sealing consist like the orignal one of an V-ring and one pressure O-ring.
All parts are made in Germany and will be the best replacemant for the original one.
scope of delivery:

1x rubber V-ring to protect the bearing
1x O-ring
made in Germany
grease resistant rubber
two pieces will be needed

Made in Germany

4,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 924

Holder for V-sleeve front axle

Detail

Spring to secure the V-rubber ring at the upper axle joint Trabant 601. This spring clamp fixed the sealing rubber.
Good replacement for the rubber O-ring.

material: steel spring
surface: galvaniced
scope of delivery as an single part
made in Germany
two pieces will be needed

2,26 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8206

Upper bushing for spring yoke

Detail

Upper bearing for the spring yoke (front axle) of all models of Trabant 601 like Limousine, station wagon, Kuebel and Tramp.
Delivery as single part.
Please note: the complete bearing consist of two parts for each axle 1x upper bushing and 1x lower bushing.
The material of this bushing is Miramid. This is a plastic component with brilliant sliping features.
The bushing have to pressed in the front axle.
additional needed parts, have to be ordered separately:
Lower bushing (part.-no.:926)
Sealing spring yoke (part.-no.:924)

additional needed special tools for assembly:

Reamer 20-H7

5,77 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 925

Lower bushing for spring yoke

Detail

Lower bearing for the spring yoke (front axle) of all models of Trabant 601 like Limousine, station wagon, Kuebel and Tramp.
Delivery as single part.
Please note: the complete bearing consist of two parts for each axle 1x upper bushing and 1x lower bushing.
The material of this bushing is Miramid. This is a plastic component with brilliant sliping features.
The bushing have to pressed in the front axle.
additional needed parts, have to be ordered separately:
Upper bushing (part.-no.:925)
Sealing spring yoke (part.-no.:924)

additional needed special tools for assembly:

Reamer 20-H7

4,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 926

Rubber cap for spring yoke / outer wishbone bearing

Detail

Protection cap dor the spring yoke and the lower axle joint.
It saves the screw joint against splash water and dust an it is an lubricant- reservior as well.

material: rubber, black
made in EU
in summery it will be two or four pieces needed

3,90 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 927

Washer for spring yoke 0,2mm

Detail

Spezial washer for adjusting the bearing gap between the Steering knuckle and the spring yoke.
Empirically different thickness will be needed for an precise adjustment.

material: chadded sheet matal
outside diameter: 19,0 mm
inside diameter: 12,8 mm
thickness: 0,2 mm
fit to all Trabant 500, 600 and 601

0,24 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 928

Washer for spring yoke 0,5mm

Detail

Spezial washer for adjusting the bearing gap between the Steering knuckle and the spring yoke.
Empirically different thickness will be needed for an precise adjustment.

material: chadded sheet matal
outside diameter: 19,0 mm
inside diameter: 12,8 mm
thickness: 0,5 mm
fit to all Trabant 500, 600 and 601

0,24 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6527

Washer for spring yoke 1,0mm

Detail

Spezial washer for adjusting the bearing gap between the Steering knuckle and the spring yoke.
Empirically different thickness will be needed for an precise adjustment.

material: chadded sheet matal
outside diameter: 19,0 mm
inside diameter: 13 mm
thickness: 1,0 mm
fit to all Trabant 500, 600 and 601

0,24 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6787

Split pin for spring yoke

Detail

Splint for spring yoke, it will be fixed thrue the spring yoke into ton convolute eye of the leaf spring.

diameter: 8mm
lenght: 80mm
material: electrogalvanized steel, DIN 94
two pieces will be needed

0,65 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 929

lever grease gun Detail german industry quality pre-installed with reinforced hose and hydraulical connector match grease cartridge: Art.No.: 6311
55,58 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6312

lubrication set

Detail

lubrication set consist of:

lever grease gun, Art.No.: 6312
grease cartridge, Art.No.: 6311
adhesive transparent lubricant, Art.No.: 6255

68,68 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6313

The product category Trabant 601 > Spare parts > Front axle > steering knuckles & wishbone is spread over 5 sites:

1 2 3 4 5
Show all products

* All prices inclusive VAT and plus shipping costs.