Skoda

The product category Skoda is spread over 4 sites:

Wheel brake cylinder rear axle (Skoda S100/S110/S130/Favorit/Forman) 19,05mm

Wheel brake cylinder for the drum brake on rear axle of many Skoda types with vintage up to 1994 (S100, RS110, 105, 120, 130 (also Rapid), Favorit und Forman)

Diameter of piston: 19,05 mm
delivery in tandem with bleeder screw

23,29 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7069

Brake master cylinder (Skoda S100/S110/S130/Favorit/Forman) 19,05mm

Detail

Two circle brake master cylinder for the brake system of many Skoda types with vintage up to 1994 (S100, RS110, 105, 120, 130 (also Rapid), Favorit und Forman)

Diameter of piston: 19,05 mm
delivery inclusive connection hose and hose clips

68,13 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8091

Brake disc kit for Skada 100/ 110/ 130/ 105 / 120

Detail

One set of brake disc for the dobble piston brake suddle of the front axle disc brake system of the Skoda S105 and S120.
Fit to the right and left front axle with brake caliper type: piston diameter 2x 46 mm.

Producer / mark: Brembo
thickness of the brake disc: 9mm
outside diameter: Ø 252 mm
thickness limit: 8mm
highness 54,5 mm
middle circle diameter: 80 mm
bolt holes: 4
contens: two pieces of barke discs
total one set will be needed

71,48 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8097

Spare parts for the 4 piston brake caliper

Spring clamp for brake lining, stainless steel

Detail

Brake pad clamp fit to the front disk brake system of Wartburg 353, Wartburg 1.3, Skoda 105 and Skoda 120.
This part is an high quality reproduction made in Germany.
The spring wire is made of secial stainless steel to give your Old or Youngtimer the best technical and optical performance.

Spring wire: stainless steel (VA)
made in Germany
For each Brake suddle one pice will be needed (total 2 pieces)

4,98 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3082

Brake lining kit for disc brake, Bosch

Detail

One set of brake linings with good quality made by Bosch.
Complete set of disk brake lining consist of 4 pices.
Fit to vehicles Wartburg 353, Wartburg 1.3, Skoda 105 und Skoda 120 with four-piston brake caliper.

delivery without mounting parts
made by Bosch

32,14 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7736

Brake lining kit for disc brake, TRW

Detail

One set of brake linings with high quality made by TRW.
Complete set of disk brake lining consist of 4 pices.
Fit to vehicles Wartburg 353, Wartburg 1.3, Skoda 105 and Skoda 120 with four-piston brake caliper.

delivery without mounting parts
made by TRW

36,89 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7737

Brake lining kit for disc brake

Detail

One set of brake linings reproducted made by Europeen company.
Complete set of disk brake lining consist of 4 pices.
Fit to vehicles Wartburg 353, Wartburg 1.3, Skoda 105 und Skoda 120 with four-piston brake caliper.

delivery without mounting parts
made in EU

28,38 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3081

Cotter pin for brake lining Detail Splitted pin for disk brake lining. For each brake suddle two pieces will be needed (4 pieces total). Fit to Wartburg 353, Wartburg 1.3, Skoda 105 und Skoda 120.
0,58 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 3083 Delivery only at advance payment.

Brake caliper, single part, left side

Detail

Overhaul part, please send this part in advance to our company for refresh.

165,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6725

Brake caliper, single part, right side (W353/W1.3/S105/S120)

Detail

Wartburg has got at the front axle a 4-piston caliper (fixed suddle)

The caliper right side is complete remanufactured:

new sealed joint face of both caliper case halves and mounted with new high-tension bolts
surface electrogalvanized with olic draped colour
four new pistons with new sealing rings and dust caps
new bleed screws with rubber caps

Delivery as single part without attachments (Cotter pin for brake lining (5x80), Spring clamp for brake lining and brake lining have to ordered additional).

For more informations to this exchange part please use the Detail button.

Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.

165,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6726

The product category Skoda is spread over 4 sites:

1 2 3 4
Show all products

* All prices inclusive VAT and plus shipping costs.