This site in german: Skoda 
You are here: > Skoda
Navigation

Skoda

The complete offer in Skoda

Wheel brake cylinder rear axle (Skoda S100/S110/S130/Favorit/Forman) 19,05mm

Wheel brake cylinder for the drum brake on rear axle of many Skoda types with vintage up to 1994 (S100, RS110, 105, 120, 130 (also Rapid), Favorit und Forman)
  • Diameter of piston: 19,05 mm
  • delivery in tandem with bleeder screw
23,29 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7069

Brake master cylinder (Skoda S100/S110/S130/Favorit/Forman) 19,05mm

Two circle brake master cylinder for the brake system of many Skoda types with vintage up to 1994 (S100, RS110, 105, 120, 130 (also Rapid), Favorit und Forman)
  • Diameter of piston: 19,05 mm
  • delivery inclusive connection hose and hose clips
68,13 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8091
Delivery only at advance payment.

Brake disc kit for Skada 100/ 110/ 130/ 105 / 120

One set of brake disc for the dobble piston brake suddle of the front axle disc brake system of the Skoda S105 and S120.
Fit to the right and left front axle with brake caliper type: piston diameter 2x 46 mm.
  • Producer / mark: Brembo
  • thickness of the brake disc: 9mm
  • outside diameter: Ø 252 mm
  • thickness limit: 8mm
  • highness 54,5 mm
  • middle circle diameter: 80 mm
  • bolt holes: 4
  • contens: two pieces of barke discs
  • total one set will be needed
71,48 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8097
Spare parts for the 4 piston brake caliper 

Spring clamp for brake lining, stainless steel

Brake pad clamp fit to the front disk brake system of Wartburg 353, Wartburg 1.3, Skoda 105 and Skoda 120.
This part is an high quality reproduction made in Germany.
The spring wire is made of secial stainless steel to give your Old or Youngtimer the best technical and optical performance.
  • Spring wire: stainless steel (VA)
  • made in Germany
  • For each Brake suddle one pice will be needed (total 2 pieces)
4,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3082

Brake lining kit for disc brake, Bosch

One set of brake linings with good quality made by Bosch.
Complete set of disk brake lining consist of 4 pices.
Fit to vehicles Wartburg 353, Wartburg 1.3, Skoda 105 und Skoda 120 with four-piston brake caliper.
  • delivery without mounting parts
  • made by Bosch
32,14 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7736

Brake lining kit for disc brake, TRW

One set of brake linings with high quality made by TRW.
Complete set of disk brake lining consist of 4 pices.
Fit to vehicles Wartburg 353, Wartburg 1.3, Skoda 105 and Skoda 120 with four-piston brake caliper.
  • delivery without mounting parts
  • made by TRW
36,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7737
Delivery only at advance payment.

Brake lining kit for disc brake

One set of brake linings reproducted made by Europeen company.
Complete set of disk brake lining consist of 4 pices.
Fit to vehicles Wartburg 353, Wartburg 1.3, Skoda 105 und Skoda 120 with four-piston brake caliper.
  • delivery without mounting parts
  • made in EU
28,38 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3081

Cotter pin for brake lining

Splitted pin for disk brake lining. For each brake suddle two pieces will be needed (4 pieces total).
Fit to Wartburg 353, Wartburg 1.3, Skoda 105 und Skoda 120.
0,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3083
Delivery only at advance payment.

Brake caliper, single part, left side

Overhaul part, please send this part in advance to our company for refresh.
165,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6725

Brake caliper, single part, right side (W353/W1.3/S105/S120)

Wartburg has got at the front axle a 4-piston caliper (fixed suddle)

The caliper right side is complete remanufactured:
  • new sealed joint face of both caliper case halves and mounted with new high-tension bolts
  • surface electrogalvanized with olic draped colour
  • four new pistons with new sealing rings and dust caps
  • new bleed screws with rubber caps

Delivery as single part without attachments (Cotter pin for brake lining (5x80), Spring clamp for brake lining and brake lining have to ordered additional).

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
165,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6726
Delivery only at advance payment.

Brake caliper, left-hand, complete

Wartburg has got at the front axle a 4-piston brake suddle (fixed suddle)
This caliper is suitable for follow vehicles:
  • Wartburg 353 (only with disc brake at front axle)
  • Wartburg 1.3
  • Skoda 130
  • Skoda Rapid (120G, 130G, 135G)

Brake caliper left side is complete remanufactured (details see brake caliper, component part).
scope of delivery:


The spare part we can only deliver in exchange. The worned out part (overhaulable IFA original part)have to be send to our company in advance.
Old caliper (worned out) have to be shiped in advance!
185,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3075

Brake caliper, complete, right-hand

Wartburg has got at the front axle a 4-piston brake caliper (fixed suddle)
This caliper is suitable for follow vehicles:
  • Wartburg 353 (only with disc brake at front axle)
  • Wartburg 1.3
  • Skoda 130
  • Skoda Rapid (120G, 130G, 135G)

Right-hand brake caliper is complete remanufactured (details see brake caliper, component part).

Scope of delivery:


The spare part we can only deliver in exchange. The worned out part (overhaulable IFA original part)have to be send to our company in advance.
Old caliper (worned out) have to be shiped in advance!
185,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 3076
Delivery only at advance payment.

Bleeder screw, rear - brake suddle front

Bleeder screw for rear wheel brake cylinder Rear wheel-brake cylinder piston = 19,05mm and Rear wheel-brake cylinder piston = 15,87mm Trabant 601, Trabant 1.1 and QEK-caravans.
The bleeder screw fit also to Brake suddle left hand and Brake suddle right hand Wartburg 353 and Wartburg 1,3.
3 pieces will be needed for each brake suddle.

thread: M8 X 1,25
2,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 214

Bleeder screw cap

fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
  • material: rubber
  • made in Germany
0,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 215
Delivery only at advance payment.

screw for Steering brake suddle

hexagon head screw M12 x 1,5 x 30 for mountig brake suddle right hand or brake suddle left hand at knuckle
fit to Wartburg 353 and Wartburg 1.3

surface zinc coated and gold passivated
tensile strength: 10.9
you will need 2 pieces for one brake suddle.
1,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6320

Repair-set for brake caliper PLUS (W353/W1.3/S130/Rapid)

Complete set for repairing the brake caliper of Wartburg 353/1.3 and Skoda S120 und Rapid (120G, 130G, 135G), too.
All parts in outstanding quality.

Inhalt:
  • 4x sealing ring for piston
  • 4x dust protection cap
  • 3x cap for bleeder screw
  • 4x brake piston
  • sealing ring for caliper conduit
  • 1x spring clamp for brake lining
  • 4x cotter pin for brake lining
  • 3x bleeder screw
  • 4x mounting bolt

2 pieces needed for complete front axle
92,32 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6938
Delivery only at advance payment.

Repair-set for brake caliper (W353/W1.3/S130/Rapid)

Repair-set for the four piston brake suddle of the Wartburg 353/1.3 and Skoda S105 and S120, too.
All parts in reproducted in best quality.

contens:
  • 4x sealing ring for piston
  • 4x dust protection cap
  • 3x cap for bleeder screw

Two pieces will be needed for the complete front brake (disc brake caliper).
28,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6723
Delivery only at advance payment.

Protective cap for brake-suddle pistion

Dust sleeve for the singe part of the brake piston.
Four pieces will be needed for one brake caliper.
Made by an special manufacture to save the best quality.

suitable for brake caliper of follow car types:
  • Wartburg 353
  • Wartburg 1.3
  • Skoda 105
  • Skoda 120
  • useable for brake piston diameter: 34mm
  • for each brake caliper four pieces will be needed
9,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3077
Delivery only at advance payment.

Sealing ring for brake-suddle pistion ( incl.8 pices )

Sealing ring set for all 8 brake pistons of the vehicle.
One set will be needed.
Made by an special manufacture to save the best quality.
Fit for brake caliper of follow car types:
  • Wartburg 353
  • Wartburg 1.3
  • Skoda 105
  • Skoda 120
16,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3078
Delivery only at advance payment.

Piston for caliper (W353/W1.3/S130/Rapid)

One piston fit to caliper of Wartburg 353 (only with disc brake system at front axle) and for Wartburg 1.3 (all variants) and Skoda S130 / Rapid.
  • High quality reporduction. Surface like original chrom plated
  • diameter brake piston: 34mm
  • Four pieces will be needed for one caliper.
24,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6828

Bolt for caliper (W353/W1.3/S130/Rapid)

One connecting bolt fit to caliper of Wartburg 353 (only with disc brake system at front axle) and for Wartburg 1.3 (all variants)
high grade bolt: 12.9
Surface: zink coated

Four pieces will be needed for one caliper.
3,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6829
Delivery only at advance payment.

Sealing ring for caliper conduit, 2 pieces (W353/W1.3/S130/Rapid)

One pair of sealing rings fit to connection conduits between caliper halves.
Fit to the vehicles: Wartburg W353 and W1.3 and Skoda S130/Rapid)
  • high quality
  • material: brake fliud resistant rubber
  • contens: 1 Paar (2 pieces)
  • set is needed for each brake suddle
6,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6827
Delivery only at advance payment.
Spare parts for the double piston brake caliper 

Repair-set for brake caliper for Skada 105 / 120

Repair-set for the dobble piston brake suddle of the Skoda S105 and S120.
Piston diameter: 46 mm
All parts in reproducted in best quality.

Contens:
  • 2x sealing ring for piston
  • 2x dust protection cap
  • 2x snap ring
  • 1x cap for bleeder screw

Two pieces will be needed for the complete front brake (disc brake caliper).
14,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8079
Delivery only at advance payment.

Brake caliper right hand for Skada 105 / 120

Dobble piston brake suddle for the front axle disc brake of the Skoda S105 and S120 as exchange part.
Piston diameter: 2x 46 mm
For brake disc thickness: 9mm
All parts in reproducted in best quality.
  • complete overhauled exchenge part
  • delivery inclusive all sealings and bleeder screw
  • can be installed without additional bits
  • one piece will be needed

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder to our company.
123,50 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 8092

Brake caliper left hand for Skada 105 / 120

Dobble piston brake suddle for the front axle disc brake of the Skoda S105 and S120 as exchange part.
Piston diameter: 2x 46 mm
For brake disc thickness: 9mm
All parts in reproducted in best quality.
  • complete overhauled exchenge part
  • delivery inclusive all sealings and bleeder screw
  • can be installed without additional bits
  • one piece will be needed

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder to our company.
123,50 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 8093

Bleeder screw brake caliper for Skada 105 / 120

Bleeder screw for the dobble piston brake suddle of the front axle disc brake system of the Skoda S105 and S120.
Fit to the right and left hand caliper.
Piston diameter: 2x 46 mm
For brake disc thickness: 9mm
  • surface: galvaniced
  • thread: M8x1,25
  • spanner gap: SW9 (9mm)
  • total length: ca. 41 mm
  • thread length: 15 mm
  • lenght of the spanner gap: 10 mm
  • for each brake suddle, one piece will be needed
2,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8095

Accessories kit for brake caliper for Skada 105 / 120

One set of accessories for the dobble piston brake suddle of the front axle disc brake system of the Skoda S105 and S120.
Fit to the right and left front axle with brake caliper type: piston diameter 2x 46 mm.
  • contens: 2x bolt, 2x clip, 1x cover blade
  • surface: galvaniced
  • total two sets will be needed
11,28 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8099

Brake piston for brake caliper for Skada 105 / 120

Single part of brake piston for the dobble piston brake suddle of the front axle disc brake system of the Skoda S105 and S120.
Fit to the right and left front axle with brake caliper type: piston diameter 2x 46 mm.
  • delivery as single part without any mounting bits
  • diameter: Ø 46 mm
  • surface: hard chrome-plated
  • total four pieces will be needed
33,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8098

Brake lining kit brake caliper, TRW for Skada 105 / 120

Lining set for the dobble piston brake suddle of the front axle disc brake system of the Skoda S105 and S120.
Fit to the right and left hand caliper.
Piston diameter: 2x 46 mm
For brake disc thickness: 9mm
  • Producer / mark: TRW
  • contens: four pieces of brake lining
  • total one set will be needed
25,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8096

Lamp spare kit H4 / 12V

Spare kit with different bulbs fit to voltage of 12V
content:
  • 1x H4-lamp 60/55W with base P43t
  • 2x spherical lamps 21W white with base Ba15s
  • 1x tubular lamp 21W (C21W) with base SV 8,5
  • 1x tubular lamp 5W (C5W) with base SV 8,5
  • 1x bulb 4W (T4W) with base BA 9s
  • 1x bulb for speedometer 2W with base BA 7s
  • 1x Torpedo-fuse 8A
  • 1x Torpedo-fuse 16A
12,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7057
Delivery only at advance payment.

Bulbs spare kit R2 / 6V

Spare kit with different bulbs fit to voltage of 12V
content:
  • 1x R2-lamp 45/40W with base P45t
  • 1x spherical lamps 18W white with base Ba15s
  • 1x tubular lamp 18W (C21W) with base SV 8,5
  • 1x tubular lamp 5W (C5W) with base SV 8,5
  • 1x bulb 4W (T4W) with base BA 9s
  • 1x bulb for speedometer 0,6W with base BA 7s
  • 1x spherical lamps 21W white with base Ba15s
  • 1x spherical lamps 5W white with base Ba15s
  • 1x Torpedo-fuse 8A
  • 1x Torpedo-fuse 16A
25,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7145

Lamp spare kit R2 / 12V

Spare kit with different bulbs fit to voltage of 12V
content:
  • 1x R2-lamp 45/40W with base P45t
  • 2x spherical lamps 21W white with base Ba15s
  • 1x tubular lamp 21W (C21W) with base SV 8,5
  • 1x tubular lamp 5W (C5W) with base SV 8,5
  • 1x bulb 4W (T4W) with base BA 9s
  • 1x bulb for speedometer 2W with base BA 7s
  • 1x Torpedo-fuse 8A
  • 1x Torpedo-fuse 16A
14,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6623
Delivery only at advance payment.

Air filter Skoda MB 1000

Paper filter fit the Skoda type MB1000
Best qualiy form Germany
  • inside diameter:65mm
  • outside diameter:105mm
  • length:153mm
  • Made in Germany
  • one piece will be needed
12,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7342

Air filter with expanded metal

Paper filter fit to the Skoda type MB1000
Best qualiy from Germany
  • inside diameter:65mm
  • outside diameter:105mm
  • length:153mm
  • Made in Germany
  • with expanded metal as cover (no paperboard with holes) for better air flow
  • one piece will be needed
14,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7343

Pistion pin

Piston pin single part for Skoda 105
Four pieces will be needed.
10,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6833
Delivery only at advance payment.

Bleeder screw cap with tongue

Rubber cap with additional tongue fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
The flap kibosh loosing the complete cap.
  • material: brake fluid resistant rubber
  • made in EU
1,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8446
Delivery only at advance payment.
The complete offer in Skoda
Wir versenden mit DHL.
Banküberweisung
PayPal
SEPA-Lastschrift
© 2003 - 2026 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas