Spare parts for the Trabant front axle

Category Spare parts for the Trabant front axle has the following subcategorys:

The product category Trabant 601 > Spare parts > Front axle is spread over 5 sites:

Wheel bearing set FAG, front axle 34 x 64 x 3 7

Wheel bearing type 34 x 64 x 37 2RS made by FAG in Germany.
The ball bearing fits to Trabant 601 front axle with universal driven shaft new type (tripode) and also to Trabant 1.1 front axle.

delivery inclusive hub axle nut
total twoe piece will be needed
high quality, made by FAG

additional needed special tools for deassembly / assembly:

snap ring pliers
Werkstattpresse mit verschiedenen Matritzen und Dornen

48,54 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6322

Ball bearing 34 x 64 x 3 7 original DKF

Detail

Original stock of ball bearing for the Trabant 601 front axle with constant velocity drive shaft (tripode)

double row angular contact ball bearing front axle 34 x 64 x 37 2RSR
manufactured by DKF (DDR)
for one alxe you need 1 piece

25,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6862

Ball bearing, front axle 34 x 64 x 3 7

Detail

Doueble ball bearing for the front axle 34 x 64 x 37 2RS. Fit to Trabant 601 front axle constant velocity drive shaft (tripode), Trabant 1,1 front axle and VW Golf I.

two pieces will be needed for the complete axle
good quality, made in EU
delivery as an single part without mounting bits

normaly 23,57 € now 18,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 991

Wheel hub, final drive (new type)

Detail

Wheel hub for constant velocity drive shaft Trabant 601 from vinatge april 1984.

pitch circle: 4x160mm
original spare part
one piece will be needed for each universal drive

185,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 981

Wheel bearing set FAG, front axle hinge shaft

Detail

Front axle bearing-set for Trabant 500,600 and 601 with hinge shaft drive.
consit of:

2 pieces bearings 6206 C2
1 piece radial sealing 48 x 62 x 8 without additional dust lip
1x grease
1x lock plate axle

All parts maufactured by FAG.
For each wheel side, one set will be needed

44,90 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7984

Wheel bearing set, 6206 C2, front axle hinge shaft drive

Detail

Front axle bearing-set fit to Trabant 500,600 and 601 with hinge shaft drive.
consit of:

2 pieces bearings 6206 C2
1 piece radial sealing 48 x 62 x 8 with additional dust lip
1x snap ring wheel bearing
1x lock plate axle

All parts made in Germany with high quality.
For each wheel side, one set will be needed

44,72 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7985

Wheel bearing 6206 C2

Detail

One row grooved ball bearing 6206 C2, bearing for rear axle Trabant 601 and front axle Trabant 601 (univesal driven shaft-old type, up to 03/1984).
For one wheel will be needed 2 pices.
For a complete Trabant 601 with univesal driven shaft-old type you will need 8x 6206 C2.
For a Trabant with universal driven shaft-new type (tripode)you will need 4 pices.

made in Germany

18,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 992

snap ring for wheel bearings

Detail

One snap ring to fix ball bearings for rear axle Trabant and front axle Trabant 601 (universal driven shaft-old type, up to 03/1984).

for each hole diamter of 62 mm

For one wheel will be needed 1 piece.
For a complete Trabant 601 with univesal driven shaft-old type ( front and rear axle) you will need 4x.
For a Trabant with universal driven shaft-new type (601 and 1.1) you will need only 2 pieces for rear axle.

Needed plier for dismounting and mounting (not part of this offer):
1x Seeger ring pliers, external retaining rings 40-100mm (LDM-part.-Nr.:8332)

1,74 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6764

Pressure spring for wheel bearings

Detail

One pressure spring to keep apart the inner rings of both ball bearings (6206 C2) from rear axle Trabant (only with conical stub axle) and front axle Trabant 601 (universal driven shaft-old type, up to 03/1984).

For one wheel will be needed 1 piece.
For a complete Trabant 601 with univesal driven shaft-old type ( front and rear axle) you will need 4x.
For a Trabant with universal driven shaft-new type (601 and 1.1) you will need only 2 pieces for rear axle.

normaly 8,50 € now 5,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6949

Radial seal, rear axle 48x62x8

Detail

radial seal 48x62x8 for sealing of:

cylindrical and conical rear axle of Trabant 500, 600 and 601
cylindrical rear axle of Trabant 1.1
outer hinge shaft for front axle of Trabant 500, 600 und 601 (built up to April 1984)
high quality
for each wheel side you will need 1 piece

5,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 993

Radial seal, rear axle 48x62x8 with dust lip

Detail

radial seal 48x62x8 with dust lip for sealing of:

cylindrical and conical rear axle of Trabant 500, 600 and 601
cylindrical rear axle of Trabant 1.1
outer hinge shaft for front axle of Trabant 500, 600 und 601 (built up to April 1984)
high quality
with additional dust lip to protect the sealing lip for the brake dust
for each wheel side you will need 1 piece

5,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6118

The product category Trabant 601 > Spare parts > Front axle is spread over 5 sites:

1 2 3 4 5
Show all products

* All prices inclusive VAT and plus shipping costs.