This site in german: Trabant 601 > Ersatzteile > Getriebe > Gelenkwelle 
You are here: > Trabant 601> Spare parts> Gearbox> Driven shaft

Driven shaft and Accesories

The product category Trabant 601 > Spare parts > Gearbox > Driven shaft is spread over 3 sites:

Complete drive shafts and single parts 

Universal shaft, complete set

1 pair of constant velocity drive shaft for the right and left side
  • maximum torque: 385 Nm
  • maximum deflection angle outside joint: 45 degree
  • maximum deflection angle inner joint: 17 degree
  • displacement path: 26 mm
  • for Trabant 601 from vinatge 04/1984
863,23 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 661

Universal shaft,complete set

Complete set of hinge drive shaft for Trabant 601 up to vintage april 1984
scope of delivery:
  • 1x drive shaft complete left hand
  • 1x drive shaft complete right hand
  • 2x woodruff key
  • inclusive all rubber sleeves
486,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6079

Outer joint for universal shaft

Outer joint for for constant velocity drive shaft Trabant for right or left hand.
Fit for Trabant 601 from April 1984 and Trabant 1.1
  • delivery inclusive boot
  • made in EU
  • 2 pieces will be needed
  • Trabant 601 from vinatge 04/1984
  • Trabant 1,1
75,40 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 8432

Shaft spider for transnission shaft, complete

Inner joint for constant velocity drive shaft Trabant 601: three 120 degree shifted pins with 28 cageless bearing needles (1,6 x 7,8) for each roll.
  • maximum turning moment: 385 Nm
  • maximum deflection angle inner joint: 17 degree
  • displacement path: 26 mm
  • ab Baujahr 04/1984
  • one piece will be needed for each universal shaft
41,44 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 668

Wheel hub, final drive (new type)

Wheel hub for constant velocity drive shaft Trabant 601 from vinatge april 1984.
  • pitch circle: 4x160mm
  • original spare part
  • one piece will be needed for each universal drive
185,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 981
Driveshaft sleeves --setsTrabant old and new version

Sleeve rubber set ( hinge shaft, wheel side)

sleeve rubber set for outer joint of hinge shaft Trabant 601 up to vintage: april 1984.
contents:
47,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6297

Sleeve rubber GKN ( constant velocity drive shaft )

CV rubber sleeve set for outer joint of universal shaft, constant velocity drive shaft for Trabant 601 from vinatge: april 1984 and Trabant 1,1 (without vintage delimitation).
Sleeve made by GKN
contents:
  • 1x sleeve rubber
  • 1x high performance grease
  • 1x band clamp big diamter
  • 1x band clamp small diamter
25,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7512

Sleeve rubber EU ( constant velocity drive shaft )

CV rubber sleeve set for outer joint of universal shaft, constant velocity drive shaft for Trabant 601 from vinatge: april 1984 and Trabant 1,1 (without vintage delimitation).
Sleeve made in Europe
contents:
19,24 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6296

Sleeve rubber ( inner side )

Sleeve for inner final drive joint Trabant 601. The sleeve rubber is fixed at the drive shaft and on the other side at the gearbox. This bellows fit to the universal shaft (hinge system) and to the constant velocity drive shaft.
  • material: rubber
  • scope of delivery without mounting material
  • NOS, original spare part
  • two pieces will be needed
38,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 654

Holder for sleeve rubber ( inner side )

Spring for the sleeve inner final drive joint Trabant 601. This spring clamp fixed the sealing rubber at the drive shaft at the gearbox side.
This clamp fit to the universal shaft (hinge system) and to the constant velocity drive shaft as well.
  • material: steel spring
  • surface: galvaniced
  • scope of delivery as an single part
  • made in Germany
  • two pieces will be needed
2,26 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8205
The product category Trabant 601 > Spare parts > Gearbox > Driven shaft is spread over 3 sites:
123
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Spielzeug Ritter