Driven shaft and Accesories

The complete offer in Driven shaft and Accesories

Universal shaft, complete set

Detail

1 pair of constant velocity drive shaft for the right and left side

maximum torque: 385 Nm
maximum deflection angle outside joint: 45 degree
maximum deflection angle inner joint: 17 degree
displacement path: 26 mm
for Trabant 601 from vinatge 04/1984

863,23 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 661

Universal shaft,complete set

Detail

Complete set of hinge drive shaft for Trabant 601 up to vintage april 1984
scope of delivery:

1x drive shaft complete left hand
1x drive shaft complete right hand
2x woodruff key
inclusive all rubber sleeves

486,40 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6079

Outer joint for universal shaft

Detail

Outer joint for for constant velocity drive shaft Trabant for right or left hand.
Fit for Trabant 601 from April 1984 and Trabant 1.1

delivery inclusive boot
made in EU
2 pieces will be needed
Trabant 601 from vinatge 04/1984
Trabant 1,1

75,40 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 8432

Shaft spider for transnission shaft, complete

Detail

Inner joint for constant velocity drive shaft Trabant 601: three 120 degree shifted pins with 28 cageless bearing needles (1,6 x 7,8) for each roll.

maximum turning moment: 385 Nm
maximum deflection angle inner joint: 17 degree
displacement path: 26 mm
ab Baujahr 04/1984
one piece will be needed for each universal shaft

41,44 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 668

Wheel hub, final drive (new type)

Detail

Wheel hub for constant velocity drive shaft Trabant 601 from vinatge april 1984.

pitch circle: 4x160mm
original spare part
one piece will be needed for each universal drive

185,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 981

Driveshaft sleeves --setsTrabant old and new version

Sleeve rubber set ( hinge shaft, wheel side)

Detail

sleeve rubber set for outer joint of hinge shaft Trabant 601 up to vintage: april 1984.
contents:

1x sleeve rubber (Art.-No.: 653)
1x band clamp long
1x high performance grease (Art.-No.: 6256)

47,60 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6297

Sleeve rubber GKN ( constant velocity drive shaft )

Detail

CV rubber sleeve set for outer joint of universal shaft, constant velocity drive shaft for Trabant 601 from vinatge: april 1984 and Trabant 1,1 (without vintage delimitation).
Sleeve made by GKN
contents:

1x sleeve rubber
1x high performance grease
1x band clamp big diamter
1x band clamp small diamter

25,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7512

Sleeve rubber EU ( constant velocity drive shaft )

Detail

1x sleeve rubber (Art.-No.: 653)
1x band clamp set (Art.-No.: 6394)
1x high performance grease (Art.-No.: 6256)

19,24 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6296

Sleeve rubber ( inner side )

Detail

Sleeve for inner final drive joint Trabant 601. The sleeve rubber is fixed at the drive shaft and on the other side at the gearbox. This bellows fit to the universal shaft (hinge system) and to the constant velocity drive shaft.

material: rubber
scope of delivery without mounting material
NOS, original spare part
two pieces will be needed

38,90 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 654

Holder for sleeve rubber ( inner side )

Detail

Spring for the sleeve inner final drive joint Trabant 601. This spring clamp fixed the sealing rubber at the drive shaft at the gearbox side.
This clamp fit to the universal shaft (hinge system) and to the constant velocity drive shaft as well.

material: steel spring
surface: galvaniced
scope of delivery as an single part
made in Germany
two pieces will be needed

2,26 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8205

Single parts of drive shaft sleeves

Sleeve rubber (outer tripode universal shaft side)

Detail

CV rubber sleeve for outer joint of universal shaft, constant velocity drive shaft for Trabant 601 from vinatge: april 1984 and Trabant 1,1 (without vintage delimitation).

material: Rubber, black
size: inner diameter hinge: 68 mm, inner diameter universal shaft: 18 mm, length 105 mm
made in EU
one piece will be needed for each drive shaft

12,80 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 652

Sleeve rubber ( outer universal shaft side )

Detail

sleeve rubber set for outer joint of hinge shaft Trabant 601 up to vintage: april 1984.

material: resistent rubber, black
original spare part
one piece will be needed for each drive shaft

38,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 653

Band clamp set for sleeve rubber of universal shaft

Detail

Rebound strap set for mounting of sleeve rubbers of universal shafts
consist of:

long band clamp (for example for mounting of sleeve rubber on shaft joint), for diameter from 40mm up to 110mm
short band clamp to seal sleeve rubber on universal shaft, for diameter from 25mm up to 50mm

application:

the band clamp have to bent around the sleeve rubber by hand, so that it clinging to the sleeve rubber in best way
fixing this position by hooking into
spanning the band clamp with a pincers
ready

5,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6394

Mounting strips for drive shaft sleeves

Band clamp, short

Detail

Rebound strap for mounting of sleeve rubbers of universal shafts
long band clamp (for example for mounting of sleeve rubber on shaft joint), for diameter from 25mm up to 50mm
application:

the band clamp have to bent around the sleeve rubber by hand, so that it clinging to the sleeve rubber in best way
fixing this position by hooking into
spanning the band clamp with a pincers
ready

3,03 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6536

Band clamp , long

Detail

Rebound strap for mounting of sleeve rubbers of universal shafts
long band clamp (for example for mounting of sleeve rubber on shaft joint), for diameter from 40mm up to 110mm
application:

the band clamp have to bent around the sleeve rubber by hand, so that it clinging to the sleeve rubber in best way
fixing this position by hooking into
spanning the band clamp with a pincers
ready

3,81 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6408

Rebound strap 4,6 X 360 mm

Detail

Strap for rubber sleeves.

material: stainless steel
made in Germany
4 pieces will be needed

2,48 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 655

Inner universal shaft, left side ( lenght 420 mm )

Detail

Inner part of the universal shaft Trabant 601 front left hand. The joint bolt side will be fittet at the gearbox.
up to vinatage april 1984

lenght: bolt eye - hinge bolt eye: 380 mm
lenght complete: 420 mm
diameter: 20mm
original IFA spare part
one piece will be needed

92,21 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 645

Inner universal shaft, right side ( lenght 555 mm )

Detail

Inner part of the universal shaft Trabant 601 front right hand. The joint bolt side will be fittet at the gearbox.
up to vintage april 1984

lenght: bolt eye - hinge bolt eye: 520 mm
lenght complete: 555 mm
diameter: 20mm
original IFA spare part
one piece will be needed

108,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 646

Joint

Detail

Outer joint for hinge universal drive right or left hand. Fit to Trabant 601 up to vintage: april 1984

scope of delivery without add on parts
original IFA spare part
one piece will be needed for each universal drive

119,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 651

Snap ring for bolt for hinge joint

Detail

Circlip to secure the bolt of the outer joint for hinge drive shaft right or left hand.
Fit to Trabant 601 up to vintage: april 1984

made in Germany
four pieces will be needed for each hinge joint drive shaft

0,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7359

Bolt for hinge joint

Detail

Bolt with two snap-in rings fit to outer joint for hinge drive shaft right or left hand.
Fit to Trabant 601 up to vintage: april 1984

one bolt with two snap-in rings
original IFA spare part
two pieces will be needed for each hinge joint drive shaft

12,77 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6836

Outer universal shaft

Detail

outer stub axle for the universal drive (hinge system). Fit to the conical wheel hub.
up to vintage: april 1984

scope of delivery without add-on pieces
original IFA spare part
one piece will be needed for each final drive

88,33 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 647

Woodruff key for outer universal shaft

Detail

Fitted key for outer stub axle for the final drive (hinge system). Fit to the conical wheel hub.
Trabant 601 up to vintage: april 1984

one piece will be needed for each final drive

3,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6533

Wheel hub final drive / rear axle, conical

Detail

Hub for Trabant front universal shaft up to vintage: march 1984 and fit to rear axle with conical axle up to vinatgae march 1983.

original spare part
does not fit to constant velocity drive shaft
one piece will be needed for each axle

155,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 980

Sliding sleeve halves

Detail

Sliding element for the Sleeve rubber (outer universal shaft side) Trabant (hinge joint final drive).
up to vintage april 1984
Fit to right and left hand final drives.

material: plastic
for each final drive two pieces will be needed

12,44 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 650

Sliding piece

Detail

sliding element for the inner joint universal-shaft (hinge joint system)

material: Steel-surface hardened
up to vintage: april 1984
for each universal drive two pieces will be needed

14,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 648

Joint bolt

Detail

the bolt have to be pressed into the inner eye of the universal shaft (hinge-system)
fit to all Trabant 601 up to vintage april 1984

lenght: 44,6 mm
diameter: 17,0 mm
surface: crinded
original IFA spare part
for each universal shaft one joint bolt will be needed

18,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 649

Differential pinion axle for constant velocity drive shaft

Detail

Differential pinion axle for constant velocity drive shaft
Trabant 601 from vintage April 1984

original IFA spare part
displacement path inner joint: 26mm
2 pieces will be needed

205,27 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 663

Differential pinion axle for joint final drive

Detail

differential pinion axle for final drive (hinge system)
Trabant 601 up to vinatge april 1984

original IFA spare part
displacement path inner joint: 26mm
2 pieces will be needed

110,05 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6356

Brake hose retainer for Steering knuckle leaver left hand

Detail

metal holder for the fron brake hose at the Trabant 500, 600 and 601 front axle right hand (driver side).
Mouning at the rear side of the steering knuckle leaver bolt.
The retainer will also used at the lock plate for this screw connection.

original spare part
material: steel
delivery without any mounting bits
one piece will be needed

9,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7994

Brake hose retainer for Steering knuckle leaver right hand

Detail

metal holder for the fron brake hose at the Trabant 500, 600 and 601 front axle right hand (codriver side).
Mouning at the rear side of the steering knuckle leaver bolt.
The retainer will also used at the lock plate for this screw connection.

original spare part
material: steel
delivery without any mounting bits
one piece will be needed

9,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7993

Grease cap hinge shaft drive

Detail

Grease pot for mounting at the steering knuckles to protect the outer drive shaft hinges left and right hand.
Fit tor Trabant 601 with two M5 mounting screws.
Connection thread for padded nipple M6.

original spare part
material: steel
delivery without any mounting bits
all in all two pieces will be needed

26,33 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7885

The complete offer in Driven shaft and Accesories

* All prices inclusive VAT and plus shipping costs.