This site in german: Trabant 601 > Ersatzteile > Karosserie > Stoßstange 
You are here: > Trabant 601> Spare parts> Body> bumper bar

bumber and accessories for Trabant 601

The complete offer in bumber and accessories for Trabant 601


Front bumper holder left side

Bumber holder, one side fitted at bumber (inside) with bolts two M6 and the other side have to be fitted at the cover plate left side (2x M8).
Trabant 601 from vintage: march 1980
  • Material: metal plate
  • original IFA spare part
  • one piece will be needed
original spare part
19,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 432

Front bumper holder right side

Bumber holder, one side fitted at bumber (inside) with bolts two M6 and the other side have to be fitted at the cover plate right side (2x M8).
Trabant 601 from vintage: march 1980
  • Material: metal plate
  • original IFA spare part
  • one piece will be needed
original spare part
19,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 433

Front bumper with prime coat

Bumber for Trabant 601 from vintage march 1980. Scope of delivery with out bumber holders and plastic bumber corners.
  • new produced made in EU
  • medium quality (warped sheet metal)
  • one piece will be needed
119,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 434
1+1

Bumper corner ( plastic )

Plastic corner for front or rear bumber Trabant 601 from vintage: march 1980
Scope of delivery without look plate.
  • material: plastic
  • colour: black
  • for each bumber, two pieces will be needed
8,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 436

Look plate for front bumper corner

Look for plastic corner. Fit to front or rear bumber Trabant 601 from vintage: march 1980
  • material: galvaniced steel
  • made in EU
  • for each bumber, two pieces will be needed
1,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 437

Cover plate, left side

for Trabant 601
connection sheet between grille assembly and front wheel house (left hand)
incl. mounting point for bumper holder
  • material: formed metal plate
  • delivery: basic varnished black
  • made in EU
  • one piece will be needed
20,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 424

Cover plate, right side

for Trabant 601
connection sheet between grille assembly and front wheel house (right hand)
incl. mounting point for bumper holder
  • material: formed metal plate
  • delivery: basic varnished black
  • made in EU
  • one piece will be needed
20,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 425

Rubber push protector

Push protector for front or rear bumber Trabant 601 from vintage: march 1980
The quality does not compare to the original one.
  • material: rubber
  • colour: black
  • for each bumber, two pieces will be needed
18,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 438

Plastic cap for bumper

Small caps to close both mounting holes for rubber push protectors of bumpers for Trabant 601.
  • made of transparent plastic
  • for each bumber two pieces will be needed if NO rubber push protectors are mounted
1,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7067

Cover plate, front

This cover plate is mouned under the Trabant 601 front bumber. It save the dynamo and a part of the pree silencer.
  • material: formed metal plate
  • delivery: basic varnished black
  • made in EU
  • one piece will be needed
44,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 459

Rear bumper holder left side

Bumber holder, one side fitted at bumber (inside) with bolts two M6 and the other side have to be fitted at the outer lower part of boot left side (2x M6).
Trabant 601 from vintage: march 1980
  • Material: metal plate
  • original IFA spare part
  • one piece will be needed
original spare part
25,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 540

Rear bumper holder right side

Bumber holder, one side fitted at bumber (inside) with bolts two M6 and the other side have to be fitted at the outer lower part of boot right side (2x M6).
Trabant 601 from vintage: march 1980
  • Material: metal plate
  • original IFA spare part
  • one piece will be needed
original spare part
25,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 547

Rear bumper with prime coat

Bumber for Trabant 601 from vintage march 1980. Scope of delivery with out bumber holders and plastic bumber corners.
  • new produced made in EU
  • medium quality (warped sheet metal)
  • one piece will be needed
63,96 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 506
The complete offer in bumber and accessories for Trabant 601

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas