This site in german: Trabant 601 > Ersatzteile > Motor > Kolben und Zylinder 
You are here: > Trabant 601> Spare parts> Engine> Piston and Cylinder

spare parts for the Trabant piston and cylinders

The product category Trabant 601 > Spare parts > Engine > Piston and Cylinder is spread over 3 sites:

P601 engine:  cylinder, pistons and accessories
Cylinder head Trabant 601

Cylinder head nut comlete with washer

Cylinder head nut fit to all Trabant 500,600 and 601 with two stroke engine.
  • strength class: 10.9
  • scope of delivery complete with washer
  • 4 pieces will be needed for each cylinder

The tighten bolt order and the torque you can find in details!
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6480

Cylinder head packing (head gasket)

Cylinder head packing for Trabant 601.
  • material: aluminium
  • one piece will be needed for each cylinder

The tighten bolt order and the torque you can find in details!
1,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 630

Cylinder head overhauled

Overhauled cylinder head for Trabant 601 engine. Cleaning with nut-blasting.
Test for crack, check all threads like spark-plug thread and the two M6 threads for air cooling housing, straightened.
  • spark-plug thread: M14
  • compression ratio: 7,8 : 1
  • mountable to the left and right cylinder
  • for each motor two pieces will be needed
67,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 613

Cylinder base Trabant 601

Cylinder base nut with washer

Cylinder base nut fit to all Trabant 500,600 and 601 with two stroke engine.
  • strength class: 10.9
  • scope of delivery complete with washer
  • 4 pieces will be needed for each cylinder (total 8 pieces)

The tighten bolt order and the torque you can find in details!
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6481

Cylinder base packing

Gasket for cylinder base of the Trabant engine. Can be used for all types of two stroke motors of Trabant 500,600 and 601.
  • material: embossed-sealing paper
  • one piece will be needed for each cylinder

The tighten bolt order and the torque you can find in details!
0,91 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 631

Cylinder, complete 1 paar, overhauled, with piston (+50 € pledge)

Two overhauled cylinders for Trabant 601. Engine type 26 hp. Scope of delivery inclusive 2 x piston 6 x piston rings and 2x piston pins (German reproduction (original producer)

pledge for old cylinders +50,00 Euro!
if old part will be sended back the money will be transfered back
for more informations, see details
+ 50 EURO desposit
278,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 612

Trabant cylinder (1 paar) 650 ccm (+90 € pledge)

Two overhauled cylinders for Trabant 601 with biger bore and pistons. The pistons got only two piston rings. The cylinder capacity of 650 ccm make the engine more stronger but dont lift up the rotational speed.
Scope of delivery
  • inclusive 2 x piston
  • 6 x piston rings
  • 2x piston pins
  • made in Germany


pledge for old cylinders +90,00 Euro!
if old part will be sended back the money will be transfered back
for more informations, see details
+ 90 EURO despositBitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen.
399,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6915

Trabant cylinder head for 650 ccm (1 paar)

One set of upgraded heads for the Trabant 601 cylinders with biger bore.
Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen.
86,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6927

Stud for cylinder M10 x 65mm

Stud / bolt for mounting the cylinder head at the Trabant aluminium cylinders.
Best exchange for the original screws of cylinder head.
  • thread on bouth ends: M10
  • tap length A: 26mm
  • tap length B: 19mm
  • length total: 65mm
  • Plain stud
  • total 8 pieces will be needed
3,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6368

Repair - Stud for cylinder M10 - M12 x 67mm

Bolt for repairing demaged taps inside the cylinders.
  • Plain stud
  • thread on one end: M10 and on the other end M12
  • tap length A: 44mm
  • tap length B: 22mm

In exchange for the original screws of cylinder head.
4,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6934
The product category Trabant 601 > Spare parts > Engine > Piston and Cylinder is spread over 3 sites:
123
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2018 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Fossilien