This site in german: Trabant 601 > Ersatzteile > Motor > Kolben und Zylinder 
You are here: > Trabant 601> Spare parts> Engine> Piston and Cylinder
Navigation

spare parts for the Trabant piston and cylinders

The complete offer in spare parts for the Trabant piston and cylinders

Cylinder head Trabant 601

Cylinder head nut comlete with washer

Cylinder head nut fit to all Trabant 500,600 and 601 with two stroke engine.
  • strength class: 10.9
  • scope of delivery complete with washer
  • 4 pieces will be needed for each cylinder

The tighten bolt order and the torque you can find in details!
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6480

Cylinder head packing (head gasket)

Cylinder head packing for Trabant 601.
  • material: aluminium
  • one piece will be needed for each cylinder

The tighten bolt order and the torque you can find in details!
2,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 630

Cylinder head overhauled

Overhauled cylinder head for Trabant 601 engine. Cleaning with nut-blasting.
Test for crack, check all threads like spark-plug thread and the two M6 threads for air cooling housing, straightened.
  • spark-plug thread: M14
  • compression ratio: 7,8 : 1
  • mountable to the left and right cylinder
  • for each motor two pieces will be needed
106,21 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 613
Cylinder base Trabant 601

Cylinder base nut with washer

Cylinder base nut fit to all Trabant 500,600 and 601 with two stroke engine.
  • strength class: 10.9
  • scope of delivery complete with washer
  • 4 pieces will be needed for each cylinder (total 8 pieces)

The tighten bolt order and the torque you can find in details!
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6481

Cylinder base packing

Gasket for cylinder base of the Trabant engine. Can be used for all types of two stroke motors of Trabant 500,600 and 601.
  • material: embossed-sealing paper
  • one piece will be needed for each cylinder

The tighten bolt order and the torque you can find in details!
5,62 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 631

Cylinder, complete 1 paar, overhauled, with piston

Two overhauled cylinders for Trabant 601. Engine type 26 hp. Scope of delivery inclusive 2 x piston 6 x piston rings and 2x piston pins (German reproduction (original producer)

The worn out Trabant Cylinder set have to be shiped to our company in advance for repairing.
Overhaul part, please send the Trabant 601 cylinder paar in advance to our company
527,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 612

Trabant cylinder (1 paar) 650 ccm (+90 € pledge)

Two overhauled cylinders for Trabant 601 with biger bore and pistons. The pistons got only two piston rings. The cylinder capacity of 650 ccm make the engine more stronger but dont lift up the rotational speed.
Scope of delivery
  • inclusive 2 x piston
  • 6 x piston rings
  • 2x piston pins
  • made in Germany


pledge for old cylinders +90,00 Euro!
if old part will be sended back the money will be transfered back
for more informations, see details
+ 90 EURO despositBitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen.
674,73 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6915

Trabant cylinder head for 650 ccm (1 paar)

One set of upgraded heads for the Trabant 601 cylinders with biger bore.
Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen.
275,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6927

Stud for cylinder M10 x 65mm

Stud / bolt for mounting the cylinder head at the Trabant aluminium cylinders.
Best exchange for the original screws of cylinder head.
  • thread on bouth ends: M10
  • tap length A: 26mm
  • tap length B: 19mm
  • length total: 65mm
  • Plain stud
  • total 8 pieces will be needed
3,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6368

Repair - Stud for cylinder M10 - M12 x 67mm

Bolt for repairing demaged taps inside the cylinders.
  • Plain stud
  • thread on one end: M10 and on the other end M12
  • tap length A: 44mm
  • tap length B: 22mm

In exchange for the original screws of cylinder head.
4,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6934

Repair - Stud for cylinder M10 - M14 x 67mm

Bolt for repairing demaged taps inside the cylinders.
Please note: Trabant 601 only use as the last opinion!
  • Plain stud
  • thread on one end: M10 and on the other endM14
  • tap length A: 44mm
  • tap length B: 22mm

In exchange for the original screws of cylinder head.
4,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7899

Wire snap ring

Wire snap ring for piston pin. You need two pieces for one piston.
Fit to all Trabant 601, Wartburg 353 and B1000 pistons
3,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 626

Stud M8 x 40

Stud with M8-threads on bouth ends and total length of 42mm.
Threat length (abot 16mm and 19mm)
Mounting place: Trabant engine crank case, connection between crank case and cylinders.
  • fit to all Trabant 601 engines
  • Plain stud
  • 8 pieces will be needed
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6369

Piston pin 20 x 56

piston pin for Trabant 601 from vintage: dezember 1984
  • lenght: 56 mm
  • diameter: 20mm
  • two pieces will be needed
10,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 625

Piston pin 20 x 56

Piston pin for Trabant 601 up to vintage: dezember 1984
  • lenght: 60 mm
  • diameter: 20mm
  • two pieces will be needed
24,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8439

Needle bearing for connection rod / piston pin

  • size: 24 x 26 x 2
  • count of needles: 36
  • one piece will be needed for each connection rod
10,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 610
P601: pistions in different sizes

Piston ( 72,00 mm )

Trabant piston for 26 hp engine, piston grinding diameter (size) 72,00 mm.
Made in Germany, original aluminium alloy, original crowned contour.
Piston complete consist of:
150,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 615

Piston ( 72,50 mm )

Trabant piston for 26 hp engine, piston grinding diameter (size) 72,50 mm.
Made in Germany, original aluminium alloy, original crowned contour.
Piston complete consist of:
150,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 617
P601: pistions rings and sets in different sizes

Piston ( 73,00 mm )

Trabant piston for 26 hp engine, piston grinding diameter (size) 73,00 mm.
Made in Germany, original aluminium alloy, original crowned contour.
Piston complete consist of:
150,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 619

Piston ( 73,50 mm )

Trabant piston for 26 hp engine, piston grinding diameter (size) 73,50 mm
Piston complete consist of:
150,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 621

Compression ring, single part

Trabant piston ring single part. Best use for repair and replacment.
scope of delivery:
  • inclusive 1 piece
  • high quality made in Europe
  • three pieces will be needed for each piston (6 pieces total)
Piston ring for piston size:
12,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 622

Compressoin ring Trabant two stroke engine

Complete set of piston rings for two Trabant pistons.
scope of delivery:
  • inclusive 6 pieces
  • high quality made in Europe
  • one set will be needed
Please choose the diameter:
73,50 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 616

Stud M8 x 40

Plain stud thread on bouth ends diameter M8 length 40mm fit to:
1,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6334

Exhaust manifold seal

Exhaust manifold seal for all Trabant 500,600 und 601 two stroke engine without vintage limit Limousine and station wagon.
  • Material: form-embossed graphited sealing paper
  • made in Germany
  • two pieces will be needed
2,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 41

Gasket kit Trabant engine

Set to seal the Trabi engine.
Good use after repairing or total overhauling of the engine block.
Scope of delivery:
  • Two pieces of exhaust manifold gaskets
  • Two pieces of cylinder head packing
  • Two pieces of Cylinder base packing
  • Two pieces of gasket for carburettor flange
  • One piece of seal for bearing cover crank shaft
18,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7501

Piston ring pliers

Piston ring mounting and demounting tool.
With this pliers the changing of the piston rings will be simple and save, because the rins are retained at the outside.
  • working dimensions: 1-100mm
  • surface: nickel-plated
  • with blue plastic handles
  • made in Germany
35,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7619
The complete offer in spare parts for the Trabant piston and cylinders

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas