generator and accesories

The product category Trabant 601 > Spare parts > Electrical system > Dynamo is spread over 5 sites:

Spare parts AC dynamo

Dynamo AC 12V Detail Rotary current generator complete overhauled spare part. Fit to Trabant 601 from vinatge October 1986. Scope of delivery inclusive voltage regulator. Complete refreshed in Germany. Please note: Overhaul part, please send the clutch and clutch disc in advance to our company
Overhaul part, please send the clutch and clutch disc in advance to our company	257,04 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7503

Roller bearing 6003 ZZ

Detail

Single row roller bearing 6003, ZZ, 17x35x10.
Made by FAG.
Fit to AC generator 12V Trabant, Wartburg und Barkasrotor shaft front side

ZZ- synonym for bearing cover, both side
bearing play CN(CO)-normale bearing play
one piece will be needed
made by FAG

8,57 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6330

Connection wire starter-dynamo

Detail

Cable harness complete ready made for mounting.
Connection between starter motor and AC dynamo at the Trabant 601.
Red cable for batterie charge power and blue wire for charge control light.
The blue cable will be connected by plug to the main cable harness near the signal horn.
Fit to AC generator 12V Trabant

Two core dynamo harness, engine compartment
high quality reproduction
one piece will be needed
made in Germany

19,04 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7961

Roller bearing 6303 ZZ

Detail

Single row roller bearing 6303, ZZ, 17x47x14.
High Qualit made by FAG.
Fit to AC generator 12V Trabant, LDM-part-no.: 760 and AC generator 12V Trabant 1.1, Wartburg 1,3 and Barkas B1000-1 LDM-part-no.: 762 rotor shaft front side (end shild)

ZZ- synonym for bearing cover, both side
dimensions: d=17mm, D=47mm, widness=14mm
bearing play CN(CO)-normale bearing play
one piece will be needed
made by FAG

9,79 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6333

Bolt for Dynamo ( new type )

Detail

Mounting bolt for the DC generator 12V Trabant

tensile strength rate 8.8
one piece will be needed

1,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7180

Retaining plate for Dynamo ( new type )

Detail

metal tongue for stretching the V-belt at the Trabantengine.
Fit to DC generator 12V Trabant

best replecment for the original part
made in Germany
Surface galvaniced
one piece will be needed

4,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 768

Dynamo retainer ( new type )

Detail

Retainer for Trabant AC generator 12V Trabant from vintage october 1983

material: steel
scope of delivery without sleeve
original spare part
one piece will be needed

14,28 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 766

Carrier for carbon brush Detail Retainer for the carbon brushes at the rotary current generator. New produced spare part. For each generator one piece will be needed. Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1, Multicar M25
17,85 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 8495

Pessure spring carbon brush Detail Coil spring for the carbon brushes at the rotary current generator. Original spare part (NOS) For each generator two pieces will be needed. Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-040	1,55 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 760

The product category Trabant 601 > Spare parts > Electrical system > Dynamo is spread over 5 sites:

1 2 3 4 5
Show all products

* All prices inclusive VAT and plus shipping costs.