This site in german: Trabant 601 > Ersatzteile > Elektrik > Lichtmaschine 
You are here: > Trabant 601> Spare parts> Electrical system> Dynamo

generator and accesories

The product category Trabant 601 > Spare parts > Electrical system > Dynamo is spread over 5 sites:

Spare parts AC dynamo

Bushing kit for dynamo AC

Metal bushing with rubber sleeve for the rear dynamo retainer at the rear bearing case.
  • Set consist of one bushing and one rubber ring
  • original spare part
  • one piece will be needed
original spare part number: 804.31-400 and 8042.31-400:2
8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7794

Trunnion bearing for dynamo AC

Rear trunnion bearing made of aluminium as singe part fit to alternating current dynamo Trabant 601.
  • delivery without any mounting parts
  • original spare part
  • one piece will be needed
Original Ersatzteilnummer:8042.31-400:1
24,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7798

Bushing for dynamo AC

Metal ring between front wheel bearing and V-pully / ventilator. Fit to all alternating current dynamos.
  • delivers as an single part
  • original spare part
  • one piece will be needed
Original Ersatzteilnummer:8042.32-000:1
2,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7797
Spare parts DC dynamo

Alternator DC 6V

Dynamo for vehicles with 6V direct current.
Fit to the folloing cars: : Trabant, Wartburg 311, 312 und Framo.
  • new spare part (original-IFA-part)
  • type: 220W
  • scope of delivery without belt pulley

mostly the generator has an external regulator.
380,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 761

Retaining plate for Dynamo ( old type )

Holder to stretch the V-belt at the direct current (DC) dymamo for Trabant.
Single spare part, delivery without mounting bits.
3,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 767

Dynamo retainer ( old type )

Retainer for Trabant DC alternator up to vintage october 1983
  • material: steel
  • scope of delivery without sleeve
  • original spare part
  • one piece will be needed
8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 765

Ball bearing for Dynamo ( old type )

Grooved ball bearing to retain the dynamo armature at teh case.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part, delivery without mounting bits
  • high quality made by FAG
  • two pieces will be needed
8,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7796

Dust cap for ball bearing trunnion bearing A-S

Metal cap for protection the grooved ball bearing at the trunnion bearing A-S front side agianst dust and dirt.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • outside diameter: 29mm
  • inside diameter: 15mm
  • one piece will be needed
original spare part number: 8001.4-200:3
1,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7803

Retainer for Ball bearing Trunnion bearing A-S

Mounting holder for the grooved ball bearing at the trunnion bearing A-S front side.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part, delivery mounting screws
  • original spare part
  • one piece will be needed
original spare part number: 8001.4-200:2
3,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7802
The product category Trabant 601 > Spare parts > Electrical system > Dynamo is spread over 5 sites:
12345
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Babyspielzeug