This site in german: Trabant 601 > Ersatzteile > Elektrik > Lichtmaschine 
You are here: > Trabant 601> Spare parts> Electrical system> Dynamo
Navigation

generator and accesories

The complete offer in generator and accesories

Spare parts AC dynamo

Dynamo AC 12V

Rotary current generator complete overhauled spare part.
Fit to Trabant 601 from vinatge October 1986.
Scope of delivery inclusive voltage regulator.
Complete refreshed in Germany.

Please note: Overhaul part, please send the clutch and clutch disc in advance to our company
Overhaul part, please send the clutch and clutch disc in advance to our company
257,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7503

Roller bearing 6003 ZZ

Single row roller bearing 6003, ZZ, 17x35x10.
Made by FAG.
Fit to AC generator 12V Trabant, Wartburg und Barkasrotor shaft front side
  • ZZ- synonym for bearing cover, both side
  • bearing play CN(CO)-normale bearing play
  • one piece will be needed
  • made by FAG
8,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6330

Connection wire starter-dynamo

Cable harness complete ready made for mounting.
Connection between starter motor and AC dynamo at the Trabant 601.
Red cable for batterie charge power and blue wire for charge control light.
The blue cable will be connected by plug to the main cable harness near the signal horn.
Fit to AC generator 12V Trabant
  • Two core dynamo harness, engine compartment
  • high quality reproduction
  • one piece will be needed
  • made in Germany
19,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7961

Roller bearing 6303 ZZ

Single row roller bearing 6303, ZZ, 17x47x14.
High Qualit made by FAG.
Fit to AC generator 12V Trabant, LDM-part-no.: 760 and AC generator 12V Trabant 1.1, Wartburg 1,3 and Barkas B1000-1 LDM-part-no.: 762 rotor shaft front side (end shild)
  • ZZ- synonym for bearing cover, both side
  • dimensions: d=17mm, D=47mm, widness=14mm
  • bearing play CN(CO)-normale bearing play
  • one piece will be needed
  • made by FAG
9,79 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6333

Bolt for Dynamo ( new type )

Mounting bolt for the DC generator 12V Trabant
  • tensile strength rate 8.8
  • one piece will be needed
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7180

Retaining plate for Dynamo ( new type )

metal tongue for stretching the V-belt at the Trabantengine.
Fit to DC generator 12V Trabant
  • best replecment for the original part
  • made in Germany
  • Surface galvaniced
  • one piece will be needed
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 768

Dynamo retainer ( new type )

Retainer for Trabant AC generator 12V Trabant from vintage october 1983
  • material: steel
  • scope of delivery without sleeve
  • original spare part
  • one piece will be needed
14,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 766

Carrier for carbon brush

Retainer for the carbon brushes at the rotary current generator.
New produced spare part.
For each generator one piece will be needed.
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1, Multicar M25
17,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8495

Pessure spring carbon brush

Coil spring for the carbon brushes at the rotary current generator.
Original spare part (NOS)
For each generator two pieces will be needed.
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-040
1,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 760

Bearing cover rotary current generator

Metal cover for the rear ball bearing (rotor shaft rear 6303ZZ) of the rotary current generator to the collector ring.
Original spare part (NOS)
  • metal, galvaniced
  • For each generator one piece will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-030
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 772

Bolt for regulator

Mounting bolt for regulator and cutout relay.
Original spare part (NOS)
  • threed: M5
  • length: 49mm
  • delivery inclusive nut SW8
  • For each generator tow pieces will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.401-000
2,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7600

Graphite collector ring rotary current generator

Collector ring for the generator rotor.
Inclusive metal plates for mounting the rotor windings
Original spare part (NOS)
  • For each generator one piece will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-032/1
96,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7599

Brush for Dynamo AC

Spare brush fit to AC Dynamo 12V Trabant 601 and dynamo 12V Wartburg 353 and Barkas B1000
  • original spare part
  • price for each one
  • two pieces will be needed

size: 15,5mm x 10mm x 5mm
wire: 30mm
original spare part number: 8042. 1-041/1
5,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 770

Diode base plate for Dynamo AC

Spare base plate complete pre installed with excitation diodes and plus diodes.
Best use for exchanging the complete componet.
Delivery without mounting parts.
Fit to dynamo 12V Trabant 601
Trabant 1,1 and Wartburg 1,3 as well Barkas B1000-1
  • original spare part
  • one base plate will be needed
original spare part number: 8042.4-410
49,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7601

Auxiliary diode base plate for Dynamo AC

Spare base plate pre installed with excitation diodes.
Best use for exchanging the single complete componet.
Delivery without mounting parts.
Fit to dynamo 12V Trabant 601
Trabant 1,1 and Wartburg 1,3 as well Barkas B1000-1
  • original spare part
  • one base plate will be needed
original spare part number: 8042.4-412/2
9,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7622

Isolating plate for auxiliary diode base plate

Spare plasic isolating plate for the base plate (excitation diodes) for Dynamo AC
Delivery without mounting parts.
Fit to dynamo 12V Trabant 601
Trabant 1,1 and Wartburg 1,3 as well Barkas B1000-1
  • original spare part
  • one isolating plate will be needed
original spare part number: 8042.4-412/2:2/1
3,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7662

Regulator and cutout relay for AC 12V Dynamo

The voltage regulator is direct mounted at the dynamo. Fit to many IFA dynamos with rotary current. for example:

  • original spare part
  • one piece will be needed
DLR TGL33604
47,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 775

Plastic cap for Dynamo AC/DC 12V

27,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 771

Bushing kit for dynamo AC

Metal bushing with rubber sleeve for the rear dynamo retainer at the rear bearing case.
  • Set consist of one bushing and one rubber ring
  • original spare part
  • one piece will be needed
original spare part number: 804.31-400 and 8042.31-400:2
18,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7794

Trunnion bearing for dynamo AC

Rear trunnion bearing made of aluminium as singe part fit to alternating current dynamo Trabant 601.
  • delivery without any mounting parts
  • original spare part
  • one piece will be needed
Original Ersatzteilnummer:8042.31-400:1
24,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7798

Bushing for dynamo AC

Metal ring between front wheel bearing and V-pully / ventilator. Fit to all alternating current dynamos.
  • delivers as an single part
  • original spare part
  • one piece will be needed
Original Ersatzteilnummer:8042.32-000:1
2,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7797
Spare parts DC dynamo

Alternator DC 6V

Dynamo for vehicles with 6V direct current.
Fit to the folloing cars: : Trabant, Wartburg 311, 312 und Framo.
  • new spare part (original-IFA-part)
  • type: 220W
  • scope of delivery without belt pulley

mostly the generator has an external regulator.
380,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 761

Retaining plate for Dynamo ( old type )

Holder to stretch the V-belt at the direct current (DC) dymamo for Trabant.
Single spare part, delivery without mounting bits.
3,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 767

Dynamo retainer ( old type )

Retainer for Trabant DC alternator up to vintage october 1983
  • material: steel
  • scope of delivery without sleeve
  • original spare part
  • one piece will be needed
8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 765

Ball bearing for Dynamo ( old type )

Grooved ball bearing to retain the dynamo armature at teh case.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part, delivery without mounting bits
  • high quality made by FAG
  • two pieces will be needed
8,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7796

Dust cap for ball bearing trunnion bearing A-S

Metal cap for protection the grooved ball bearing at the trunnion bearing A-S front side agianst dust and dirt.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • outside diameter: 29mm
  • inside diameter: 15mm
  • one piece will be needed
original spare part number: 8001.4-200:3
1,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7803

Retainer for Ball bearing Trunnion bearing A-S

Mounting holder for the grooved ball bearing at the trunnion bearing A-S front side.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part, delivery mounting screws
  • original spare part
  • one piece will be needed
original spare part number: 8001.4-200:2
3,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7802

Pin bolt for dynamo older type

Special pin for mounting the front and rear trunnion bearing A-S at the dynamo base case.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • thread: M5
  • length: 170mm
  • two pieces will be needed
original spare part number: 8001.4-000:4
2,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7805

Trunnion bearing A-S dynamo older type

Rear side trunnion bearing complete with pre-installed brushes and pressure springs. Best use for overhauling.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part without mounting equipment and bearing
  • original spare part
  • one piece will be needed
original spare part number: 8001.5-300
62,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7807

Field Ciol II for dynamo 6V

Stator coil (Field coil no.2) for mounting inside of the dynamo case.
The connecion wires have to be solided at the contacts.
Best use for refresh the dynamo.
Fit to direct current dynamos with 6V.
Useabe for the car types:
Trabant 500,600,601
Barkas V901 (Framo)
  • Single spare part, without mounting bits
  • original spare part
  • one piece will be needed
original spare part number: 8001.4/1-120
23,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7817

Field Ciol I for dynamo 6V

Stator coil (Field coil no.1) for mounting inside of the dynamo case.
The connecion wires have to be solided at the contacts.
Best use for refresh the dynamo.
Fit to direct current dynamos with 6V.
Useabe for the car types:
Trabant 500,600,601
Barkas V901 (Framo)
  • Single spare part, without mounting bits
  • original spare part
  • one piece will be needed
original spare part number: 8001.4/1-110
23,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7816

Armature for dynamo 6V

Dynamo rotour as an single part.
Best use for refresh the dynamo.
Fit to direct current dynamos with 6V.
Useabe for the car types:
Trabant 500,600,601
Barkas V901 (Framo)
  • Single spare part, without bearings or mounting bits
  • original spare part
  • one piece will be needed
original spare part number: 8001.5-210
36,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7806

Dust cap for ball bearing trunnion bearing rear

Metal cap for protection of the grooved ball bearing at the trunnion bearing A-S rear side agianst dust and dirt.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • outside diameter: 34mm
  • inside diameter: 15mm
  • one piece will be needed
original spare part number: 8001.4-200:6
1,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7804

Brush for Dynamo ( DC )

Brush for the direct current dynamo with 6V.
  • price for each one
  • two pieces will be needed
3,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 769

Brush spring for dynamo older type

Spring for the brushes to connect the rotor.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • two pieces will be needed
original spare part number: 8001.4/1-300:7/2
5,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7808

Contact rail for dynamo older type

Middle contact for connection the wire D- at the electrical box.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • one piece will be needed
original spare part number: 8001.5-101
6,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7809

Retainer for contact rail

Tinned metal pice to solder the wire of the field coil at the middle contact (D-).
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • one piece will be needed
original spare part number: 8001.4/1-100:1(5)
0,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7812

Wire clip for contact box

U-bolt to mount the cover on top of the connection terminal box
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • one piece will be needed
original spare part number: 8001.4/1-000:1
2,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7813

Contact box for dynamo older type

Wire connection terminal box for mounting at the dynamo case.
Delivery inclusive contact for wires DF and D+. Inclusive clamp bolt for connection the brushes.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • one piece will be needed
original spare part number: 8001.5-130
28,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7811

Regulator and cotout relay 12V/220W for DC 6V Dynamo

External mechanical regulator for use at the DC dynamo to control the battery voltage.
Fit to Trabant 500, 600 and 601, Framo, Wartburg 311
Original spare part.
  • voltage: 12V
  • use for DC dynamo: 220W
  • made in Germany
original spare part number: AKA 8102.9
95,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7904

Regulator and cotout relay ( 6V/220W ) for DC 6V Dynamo

External mechanical regulator for use at the DC dynamo to control the battery voltage.
Fit to Trabant 500, 600 and 601, Framo, Wartburg 311
Original spare part.
  • voltage: 6V
  • use for DC dynamo: 220W
  • made in Germany
original spare part number: AKA 8101.7
95,22 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 776
The complete offer in generator and accesories

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas