This site in german: Trabant 601 > Ersatzteile > Elektrik > Lichtmaschine 
You are here: > Trabant 601> Spare parts> Electrical system> Dynamo
Navigation

generator and accesories

The product category Trabant 601 > Spare parts > Electrical system > Dynamo is spread over 5 sites:

12345
Show all products
Spare parts AC dynamo

Bearing cover rotary current generator

Metal cover for the rear ball bearing (rotor shaft rear 6303ZZ) of the rotary current generator to the collector ring.
Original spare part (NOS)
  • metal, galvaniced
  • For each generator one piece will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-030
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 772

Bolt for regulator

Mounting bolt for regulator and cutout relay.
Original spare part (NOS)
  • threed: M5
  • length: 49mm
  • delivery inclusive nut SW8
  • For each generator tow pieces will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.401-000
2,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7600

Graphite collector ring rotary current generator

Collector ring for the generator rotor.
Inclusive metal plates for mounting the rotor windings
Original spare part (NOS)
  • For each generator one piece will be needed
  • Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-032/1
96,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7599

Brush for Dynamo AC

Spare brush fit to AC Dynamo 12V Trabant 601 and dynamo 12V Wartburg 353 and Barkas B1000
  • original spare part
  • price for each one
  • two pieces will be needed

size: 15,5mm x 10mm x 5mm
wire: 30mm
original spare part number: 8042. 1-041/1
5,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 770

Diode base plate for Dynamo AC

Spare base plate complete pre installed with excitation diodes and plus diodes.
Best use for exchanging the complete componet.
Delivery without mounting parts.
Fit to dynamo 12V Trabant 601
Trabant 1,1 and Wartburg 1,3 as well Barkas B1000-1
  • original spare part
  • one base plate will be needed
original spare part number: 8042.4-410
49,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7601

Auxiliary diode base plate for Dynamo AC

Spare base plate pre installed with excitation diodes.
Best use for exchanging the single complete componet.
Delivery without mounting parts.
Fit to dynamo 12V Trabant 601
Trabant 1,1 and Wartburg 1,3 as well Barkas B1000-1
  • original spare part
  • one base plate will be needed
original spare part number: 8042.4-412/2
9,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7622

Isolating plate for auxiliary diode base plate

Spare plasic isolating plate for the base plate (excitation diodes) for Dynamo AC
Delivery without mounting parts.
Fit to dynamo 12V Trabant 601
Trabant 1,1 and Wartburg 1,3 as well Barkas B1000-1
  • original spare part
  • one isolating plate will be needed
original spare part number: 8042.4-412/2:2/1
3,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7662

Regulator and cutout relay for AC 12V Dynamo

The voltage regulator is direct mounted at the dynamo. Fit to many IFA dynamos with rotary current. for example:

  • original spare part
  • one piece will be needed
DLR TGL33604
47,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 775

Plastic cap for Dynamo AC/DC 12V

27,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 771
The product category Trabant 601 > Spare parts > Electrical system > Dynamo is spread over 5 sites:
12345
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Babyspielzeug