spare parts for the Trabant piston and cylinders

The product category Trabant 601 > Spare parts > Engine > Piston and Cylinder is spread over 3 sites:

1 2 3
Show all products

Repair - Stud for cylinder M10 - M14 x 67mm

Detail

Bolt for repairing demaged taps inside the cylinders.
Please note: Trabant 601 only use as the last opinion!

Plain stud
thread on one end: M10 and on the other endM14
tap length A: 44mm
tap length B: 22mm

In exchange for the original screws of cylinder head.

4,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7899

Delivery only at advance payment.

Wire snap ring Detail Wire snap ring for piston pin. You need two pieces for one piston. Fit to all Trabant 601, Wartburg 353 and B1000 pistons
3,76 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 626

Stud M8 x 40

Detail

Stud with M8-threads on bouth ends and total length of 42mm.
Threat length (abot 16mm and 19mm)
Mounting place: Trabant engine crank case, connection between crank case and cylinders.

fit to all Trabant 601 engines
Plain stud
8 pieces will be needed

5,65 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6369

Delivery only at advance payment.

Piston pin 20 x 56

Detail

piston pin for Trabant 601 from vintage: dezember 1984

lenght: 56 mm
diameter: 20mm
two pieces will be needed

10,89 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 625

Delivery only at advance payment.

Piston pin 20 x 56

Detail

Piston pin for Trabant 601 up to vintage: dezember 1984

lenght: 60 mm
diameter: 20mm
two pieces will be needed

24,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8439

Needle bearing for connection rod / piston pin

Detail

size: 24 x 26 x 2
count of needles: 36
one piece will be needed for each connection rod

10,81 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 610

P601: pistions in different sizes

Piston ( 72,00 mm )

Detail

Trabant piston for 26 hp engine, piston grinding diameter (size) 72,00 mm.
Made in Germany, original aluminium alloy, original crowned contour.
Piston complete consist of:

3x compression ring
1x piston pin
2x wire snap ring
made in Germany
two pieces will be needed for each motor

150,00 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 615

Piston ( 72,50 mm )

Detail

Trabant piston for 26 hp engine, piston grinding diameter (size) 72,50 mm.
Made in Germany, original aluminium alloy, original crowned contour.
Piston complete consist of:

3x compression ring
1x piston pin
2x wire snap ring
made in Germany
two pieces will be needed for each motor

150,00 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 617

P601: pistions rings and sets in different sizes

Piston ( 73,00 mm )

Detail

Trabant piston for 26 hp engine, piston grinding diameter (size) 73,00 mm.
Made in Germany, original aluminium alloy, original crowned contour.
Piston complete consist of:

3x compression ring
1x piston pin
2x wire snap ring
made in Germany
two pieces will be needed for each motor

150,00 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 619

Piston ( 73,50 mm )

Detail

Trabant piston for 26 hp engine, piston grinding diameter (size) 73,50 mm
Piston complete consist of:

3x compression ring
1x piston pin
2x wire snap ring
made in Germany
two pieces will be needed for each motor

250,00 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 621

Delivery only at advance payment.

The product category Trabant 601 > Spare parts > Engine > Piston and Cylinder is spread over 3 sites:

1 2 3
Show all products

* All prices inclusive VAT and plus shipping costs.