This site in german: Trabant 601 > Ersatzteile > Vorderachse 
You are here: > Trabant 601> Spare parts> Front axle
Navigation

Spare parts for the Trabant front axle

Category Spare parts for the Trabant front axle has the following subcategorys:

The complete offer in Spare parts for the Trabant front axle

Wheel bearing set FAG, front axle 34 x 64 x 3 7

Wheel bearing type 34 x 64 x 37 2RS made by FAG in Germany.
The ball bearing fits to Trabant 601 front axle with universal driven shaft new type (tripode) and also to Trabant 1.1 front axle.
  • delivery inclusive hub axle nut
  • total twoe piece will be needed
  • high quality, made by FAG

additional needed special tools for deassembly / assembly:
  • snap ring pliers
  • Werkstattpresse mit verschiedenen Matritzen und Dornen
48,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6322

Ball bearing 34 x 64 x 3 7 original DKF

Original stock of ball bearing for the Trabant 601 front axle with constant velocity drive shaft (tripode)
  • double row angular contact ball bearing front axle 34 x 64 x 37 2RSR
  • manufactured by DKF (DDR)
  • for one alxe you need 1 piece
25,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6862

Ball bearing, front axle 34 x 64 x 3 7

Doueble ball bearing for the front axle 34 x 64 x 37 2RS. Fit to Trabant 601 front axle constant velocity drive shaft (tripode), Trabant 1,1 front axle and VW Golf I.
  • two pieces will be needed for the complete axle
  • good quality, made in EU
  • delivery as an single part without mounting bits
Special offer normaly 23,57 € now 18,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 991

Wheel hub, final drive (new type)

Wheel hub for constant velocity drive shaft Trabant 601 from vinatge april 1984.
  • pitch circle: 4x160mm
  • original spare part
  • one piece will be needed for each universal drive
185,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 981

Wheel bearing set FAG, front axle hinge shaft

Front axle bearing-set for Trabant 500,600 and 601 with hinge shaft drive.
consit of:
  • 2 pieces bearings 6206 C2
  • 1 piece radial sealing 48 x 62 x 8 without additional dust lip
  • 1x grease
  • 1x lock plate axle

All parts maufactured by FAG.
For each wheel side, one set will be needed
44,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7984

Wheel bearing set, 6206 C2, front axle hinge shaft drive

Front axle bearing-set fit to Trabant 500,600 and 601 with hinge shaft drive.
consit of:
  • 2 pieces bearings 6206 C2
  • 1 piece radial sealing 48 x 62 x 8 with additional dust lip
  • 1x snap ring wheel bearing
  • 1x lock plate axle

All parts made in Germany with high quality.
For each wheel side, one set will be needed
44,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7985

Wheel bearing 6206 C2

One row grooved ball bearing 6206 C2, bearing for rear axle Trabant 601 and front axle Trabant 601 (univesal driven shaft-old type, up to 03/1984).
For one wheel will be needed 2 pices.
For a complete Trabant 601 with univesal driven shaft-old type you will need 8x 6206 C2.
For a Trabant with universal driven shaft-new type (tripode)you will need 4 pices.
  • made in Germany
18,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 992

snap ring for wheel bearings

One snap ring to fix ball bearings for rear axle Trabant and front axle Trabant 601 (universal driven shaft-old type, up to 03/1984).
  • for each hole diamter of 62 mm

For one wheel will be needed 1 piece.
For a complete Trabant 601 with univesal driven shaft-old type ( front and rear axle) you will need 4x.
For a Trabant with universal driven shaft-new type (601 and 1.1) you will need only 2 pieces for rear axle.

Needed plier for dismounting and mounting (not part of this offer):
1x Seeger ring pliers, external retaining rings 40-100mm (LDM-part.-Nr.:8332)
1,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6764

Pressure spring for wheel bearings

One pressure spring to keep apart the inner rings of both ball bearings (6206 C2) from rear axle Trabant (only with conical stub axle) and front axle Trabant 601 (universal driven shaft-old type, up to 03/1984).

For one wheel will be needed 1 piece.
For a complete Trabant 601 with univesal driven shaft-old type ( front and rear axle) you will need 4x.
For a Trabant with universal driven shaft-new type (601 and 1.1) you will need only 2 pieces for rear axle.
8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6949

Radial seal, rear axle 48x62x8

radial seal 48x62x8 for sealing of:
  • cylindrical and conical rear axle of Trabant 500, 600 and 601
  • cylindrical rear axle of Trabant 1.1
  • outer hinge shaft for front axle of Trabant 500, 600 und 601 (built up to April 1984)
  • high quality
  • for each wheel side you will need 1 piece
5,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 993

Radial seal, rear axle 48x62x8 with dust lip

radial seal 48x62x8 with dust lip for sealing of:
  • cylindrical and conical rear axle of Trabant 500, 600 and 601
  • cylindrical rear axle of Trabant 1.1
  • outer hinge shaft for front axle of Trabant 500, 600 und 601 (built up to April 1984)
  • high quality
  • with additional dust lip to protect the sealing lip for the brake dust
  • for each wheel side you will need 1 piece
5,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6118

Wheel hub final drive / rear axle, conical

Hub for Trabant front universal shaft up to vintage: march 1984 and fit to rear axle with conical axle up to vinatgae march 1983.
  • original spare part
  • does not fit to constant velocity drive shaft
  • one piece will be needed for each axle
155,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 980

Outer universal shaft

outer stub axle for the universal drive (hinge system). Fit to the conical wheel hub.
up to vintage: april 1984
  • scope of delivery without add-on pieces
  • original IFA spare part
  • one piece will be needed for each final drive
88,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 647
1+2

Collar nut for front axle

The nut for front axle with collar (spanner gap 30mm) have to be tighten with a torque of 160 up to 200 Nm (16..20kp/m)
fit to:
  • Trabant 601 from mai 1984 with clocking or synchronism universal shaft
  • Trabant 1,1
  • two pieces will be needed for each car
6,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1004

Hexagon nut M24 x 1,5

Safety axle nut 24 x 1,5 for the shaft- wheel hub connection.
tightening torque: 196 Nm
application:
  • rear axle Trabant 500, 600, 601 without vintage segregation, fit to cylindrical and conical reae wheel hub
  • front axle Trabant with conical wheel hub up to vintage: mai 1984
  • 2 or 4 pieces will be needed
2,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 994

Hexagon nut M24 x 1,5

Safety axle nut 24 x 1,5 for the shaft- wheel hub connection.
This type is made like the genuine part.
tightening torque: 196 Nm
application:
  • rear axle Trabant 500, 600, 601 without vintage segregation, fit to cylindrical and conical reae wheel hub
  • front axle Trabant with conical wheel hub up to vintage: mai 1984
  • 2 or 4 pieces will be needed
3,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7040

Lock plate, axle

Metal plate for the axle nut 24 x 1,5. Safety mechanism for the shaft- wheel hub connection.
application:
  • rear axle Trabant 500, 600, 601 without vintage segregation, fit to cylindrical and conical reae wheel hub
  • front axle Trabant with conical wheel hub up to vintage: mai 1984
  • material: zinc-coated steel sheet
  • 2 or 4 pieces will be needed
The locking plates were new produced in Germany.
2,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 995
2+1
1+1

Hub cap , plastic

Plastic cover for the Trabant wheel hub. Fit to conical and cylindrical hubs.
  • material: plastic, black
  • made in EU
  • for each wheel one piece will be needed
4,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1087

Wheel bolt

The bolt have to be pressed into the wheel hub.
Fit to all Trabant 500, 600, 601.
  • knurled steel bolt with tap M12 x 1, galvaniced
  • length: 36 mm
  • original spare part
  • for each wheel 4 pieces will be needed
5,23 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 985

wheel bolt 40mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 40mm consist the length of thread and the length of knurling.
  • legth: 40mm
  • thread: M12 x 1,5
  • thread length: 28mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,98 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7200

wheel bolt 50mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 50mm consist the length of thread and the length of knurling.
  • legth: 50mm
  • thread: M12 x 1,5
  • thread length: 38mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,86 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6450

wheel bolt 60mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 60mm consist the length of thread and the length of knurling.
  • legth: 60mm
  • thread: M12 x 1,5
  • thread length: 48mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,62 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7201

wheel bolt 80mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 80mm consist the length of thread and the length of knurling.
  • legth: 80mm
  • thread: M12 x 1,5
  • thread length: 68mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7203
1+1

Wheel nut AM 12 x 1,5 cone collar

cink-coated wheel nut with cone collar for Trabant, Wartburg and all other vehicles with same bolts
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
  • replacement for original wheel nut with high quality
2,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6338

Wheel nut set, AM 12 x 1,5 cone collar

One set of cink-coated wheel nut with cone collar for Trabant, Wartburg and all other vehicles with same bolts.
Kit consists of 16 pieces.
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
  • replacement for original wheel nut with high quality
1,25 € per piece
20,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7498

Wheel nut AM 12 x 1,5 cone collar, covered

Cink-coated wheel nut with bigger cone collar. The nut end is closed an cover the bolt against dirt and water. Usefull for Trabant, Wartburg and all other vehicles with same bolts
extended hexagon
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
2,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7297

Wheel nut set AM 12 x 1,5 cone collar, covered

One set of cink-coated wheel nut with bigger cone collar. The nut end is closed an cover the bolt against dirt and water. Usefull for Trabant, Wartburg and all other vehicles with same bolts.Extended hexagon.
One kit consist of 16 pieces.
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
1,69 € per piece
26,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7499

Wheel nut AM 12 x 1,5 cone collar

cink-coated wheel nut with bigger cone collar for Trabant, Wartburg and all other vehicles with same bolts
extended hexagon
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
2,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6339

Wheel nut set, AM 12 x 1,5 cone collar

One set of cink-coated wheel nut with bigger cone collar for Trabant, Wartburg and all other vehicles with same bolts.Extended hexagon.
One kit consist of 16 pieces.
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
1,69€ per piece
26,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7500

Wheel nut AM 12 x 1,5 x 13

reduced from 0,73 € to 0,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 975

Plastic cap for wheel nut

plastic cup for wheel nuts
for all wheel nuts and wheel bolts with a spanner gap of 19mm
  • Material: plastic, black
  • same shape like original plastic cup for wheel nuts of Trabant 601
  • for each wheel, 4 pieces will be needed
2,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6438

Disk wheel, overhauled 4J x 13 Zoll (silver)

Steel rim for Trabant 601 complete overhauled and silver varnished.
  • new or used rim
  • sandblasted
  • primed
  • silver varnished with 2-K varnish
  • pitch circle 4 x 160
  • rim wide: 4J
  • rim diameter: 13 Zoll
  • center disc wheel ET 35
95,33 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6403

Disk wheel, overhauled 4J x 13 Zoll

Steel rim for Trabant 601 complete overhauled and prime coated.
  • new or used rim
  • sandblasted
  • primed
  • pitch circle 4 x 160
  • rim wide: 4J
  • rim diameter: 13 Zoll
  • center disc wheel ET 35
69,33 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 986

Summer tyre Diagonal 5.20-13 70P TL P36

Summer tyre made by Heidenau with original tire profile P36
Diagonal tyre.
  • tyre wide: 5,20
  • wheel diameter: 13"
  • New production made in Germany
  • delivery without tube for tires
104,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6510

winter tyre 145/80 R13 PNEUMANT

winter tyre fit for all types of Trabant made by the original manufacturer
  • tyre with good values in economy, safety and comfort

the pressure for the Trabant tyres type M+S (winter tyre)
Trabant 601 Limousine front axle: 23,21 psi
Trabant 601 Limousine rear axle: 23,21 psi - 26,11 psi
Trabant 601 Universal front axle: 23,21 psi
Trabant 601 Universal rear axle: 23,21 psi - 27,56 psi
49,80 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6511

Hose for R13 tires

Hose insert for the Trabant and Wartburg tires.
Fit to 13 zoll wheels.
  • for tire size: 135,145,155/ 70 R13
  • scope of delivery with tire valve and cap
17,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7416

Plastic cap set for wheel nut, chrome

cheapest type of plastic cap for all wheel nuts with a spanner gap of 19mm
  • made of chromed plastic
  • set consist of 20 pieces


The grip of the plastic cups on the wheel nuts is not the best. Additionall means should be used (for instance: adhesive lubricant, Art.No. 6255 or better universal housing seal, demountable, Art.No. 6258).
price for one piece: 0,49 €
9,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6367

Plastic cap set for wheel nut, black

cheapest type of plastic cap for all wheel nuts with a spanner gap of 19mm
  • material: made of black plastic
  • set consist of 20 pieces

The grip of the plastic cups on the wheel nuts is not the best. Additionall means should be used (for instance: adhesive lubricant, Art.No. 6255 or better universal housing seal, demountable, Art.No. 6258).
price for one piece: 0,66 €
13,01 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6366

Plastic cap for wheel nut

Cap for wheel nuts and wheel bolts with a spanner gap of 19 mm.
Type with additional collar and hemisphere.
  • single part
  • PVC, black
  • for each car 16 pieces will be needed
0,45 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 1085

Plastic cap for wheel nut, chrom effect (set of 16 pieces)

plastic cup for wheel nuts
for all wheel nuts and wheel bolts with a spanner gap of 19mm
  • set of sixteen pieces
  • made of chromed plastic
  • made in EU
price for one piece: 0,43€
9,44 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6430

lever grease gun

german industry quality

pre-installed with reinforced hose and hydraulical connector
match grease cartridge: Art.No.: 6311
55,58 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6312

lubrication set

lubrication set consist of:
68,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6313

Sealing ring for spring yoke, Germany

Rubber sealing ring to protect the bearing (connection between spring yoke and bushing) against dust and moisture.
This new produced sealing consist like the orignal one of an V-ring and one pressure O-ring.
All parts are made in Germany and will be the best replacemant for the original one.
scope of delivery:
  • 1x rubber V-ring to protect the bearing
  • 1x O-ring
  • made in Germany
  • grease resistant rubber
  • two pieces will be needed
Made in Germany
4,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 924

Under-frame

regenerated under-frame (sandblasted and varnished)

colour: black
159,33 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 445

Mounting screw under frame

Mounting bolt for the connection between underframe and front transverse member.
Scope of delivery inclusive external teeth lock washer and nut.
  • grade: 10.9
  • surface: galvaniced
  • for the Trabant 500,600,601 will be 6 pieces needed
  • for the Trabant 1,1 will be four pieces needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6746

Woodruff key for outer universal shaft

Fitted key for outer stub axle for the final drive (hinge system). Fit to the conical wheel hub.
Trabant 601 up to vintage: april 1984
  • one piece will be needed for each final drive
3,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6533
The complete offer in Spare parts for the Trabant front axle

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas