This site in german: Trabant 601 > Ersatzteile > Vorderachse > Schwenklager & Querlenker 
You are here: > Trabant 601> Spare parts> Front axle> steering knuckles & wishbone
Navigation

spare parts for the Trabant front axle left and right hand

The product category Trabant 601 > Spare parts > Front axle > steering knuckles & wishbone is spread over 5 sites:

12345
Show all products

Grease cap hinge shaft drive

Grease pot for mounting at the steering knuckles to protect the outer drive shaft hinges left and right hand.
Fit tor Trabant 601 with two M5 mounting screws.
Connection thread for padded nipple M6.
  • original spare part
  • material: steel
  • delivery without any mounting bits
  • all in all two pieces will be needed
26,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7885

Padded nipple A 6 ( M6 x 1,0 ), stainless steel

Grease nipple made of stainless stell for the outer wishbone bearing and the steering knuckle. Fit to all Trabant with two stroke engine like 500, 600, 601.
  • Gtap size: M6 x 1,0
  • made in Germany
  • all in all four pieces will be needed
1,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7726

Brake hose retainer for Steering knuckle leaver left hand

metal holder for the fron brake hose at the Trabant 500, 600 and 601 front axle right hand (driver side).
Mouning at the rear side of the steering knuckle leaver bolt.
The retainer will also used at the lock plate for this screw connection.
  • original spare part
  • material: steel
  • delivery without any mounting bits
  • one piece will be needed
9,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7994

Brake hose retainer for Steering knuckle leaver right hand

metal holder for the fron brake hose at the Trabant 500, 600 and 601 front axle right hand (codriver side).
Mouning at the rear side of the steering knuckle leaver bolt.
The retainer will also used at the lock plate for this screw connection.
  • original spare part
  • material: steel
  • delivery without any mounting bits
  • one piece will be needed
9,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7993

Steering knuckle, left / right hand, compete with rubber cushions

Front wishbone complete inclusive all rubber cushions (2x inner bushing connection to the underframe and 2x bushing connection to the outher wishbone. Fit to Trabant 601 front axle right and left hand. Latest version without cover plate for savety bar.
  • surface basic coulored, grey
  • new produced, made in EU
  • two pieces will be needed for one car
84,22 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 902

Outer rubber cushion ( 12 x 32 )

Outer rubber cushion for steering knuckle left or right hand,
  • inside diameter: 12 mm
  • length: 32 mm
  • for Trabant 500, 600 and 601
  • 2 pieces will be needed for each whisbone
5,37 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 903

Inner rubber cushion ( 12 x 44 )

Inner rubber cushion for steering knuckle left or right hand.
  • inside diameter: 12 mm
  • length: 44 mm
  • for Trabant 500, 600 and 601
  • 2 pieces will be needed for each wishbone
6,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 904

Bolt for steering knuckle front axle

Steel bolt for connection between steering knuckle and outer wishbone bearing.
Type with adjusting slot and semicircle for clipbolt
Made in Germany
  • turning moment: 75 Nm
  • grade: 10.9
  • tap: M10 on both ends
  • total length: 135 mm
  • fit to Trabant 500, Trabant 600 and Trabant 601
  • galvaniced
  • for each front axle one piece will be needed (total 2 pieces)
15,29 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 905

Bolt for inner rubber cushion wishbone

Bolt for inner inner rubber cushion wishbone Trabant 500, 600, 601 front axle left or right hand.
  • incl. retaining ring and nut
  • hexagon-head bolt
  • bolt and nut zinc coated and with olive drap colour
  • grade: 10.9
  • M12 x 1,5 x 70
  • made in Germany
  • 2 pieces will be needed for each wishbone
4,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6411

Bushing for steering knuckle

Compensations washer for the bushing outer wishbone - steering knuckle.
  • material: plastic-washer
  • inside diameter: 15 mm
  • made in EU
  • for each bushing one piece will be needed
0,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 906
The product category Trabant 601 > Spare parts > Front axle > steering knuckles & wishbone is spread over 5 sites:
12345
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Bongs