This site in german: Trabant 601 > Ersatzteile > Vergaser 
You are here: > Trabant 601> Spare parts> Carburettor

Carburettor and supplies

The product category Trabant 601 > Spare parts > Carburettor is spread over 10 sites:

Single parts carburettor type: 28HB

Mounting screw for atomizer

Mounting bolt for the atomizer jet fit to the carburettor type HB 1-... up to vintage: July 1981.
Please note: It is essential to use a screw locking device / fluid! Otherwise heavy engine demages are possible.
  • 2 piece will be needed
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8552

Mounting set for throttle valve shaft

Mounting kit for throttle valve shaft. Fit to carburettor type HB 1-... up to vintage: July 1984.
  • contens: 1x hexagon nut, 1x secure washer
  • one kit will be needed
1,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8557

Spring for idle screw, carburettor 28HB

Pressure coil-spring for idle adjusting screw at the carburettor.
Fit for: BVF carburettor 28HB: Trabant 500,600 and 601.
  • delivery as single part
  • surface: galvaniced
  • made in Germany
  • one piece will be needed
1,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8563

Idle screw, carburettor 28HB

Screw for idle adjusting at the carburettor.
Fit for: BVF carburettor 28HB: Trabant 500,600 and 601.
  • delivery as single part
  • surface: galvaniced
  • one piece will be needed
0,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8564

U-bolt for throttle valve shaft

U-bolt for throttle valve. Fit to carburettor type HB 1-... up to vintage: July 1981.
  • material: formed matal, galvaniced
  • Reproduction
  • one piece will be needed
17,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6545

Retainer-bolt for throttle valve shaft

Special retainer screw for the throttle valve. Fit to carburettor type HB 1-... up to vintage: July 1981.
  • material: steel, galvaniced
  • new German reproduction
  • one piece will be needed
3,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8576

Isolating plate carburettor-flange

This isolating plate is an heating protection between engine and carburettor. The mounting will be at the carburettor-flange (engine side) between two of carburettor-flange sealings.
  • fit to all Trabant with two stroke engine
  • material: pressed fiber paper
  • thickness: 2mm
  • one piece will be needed
2,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 733

Sealing ( carburettor-flange )

Paper seal between engine flange - isolating plate carburettor - carburettor. Fit to all models of Trabant 500, 600 und 601.
  • material: fuel resistant sealing paper
  • high quality
  • made in Germany
  • thickness: 0,5 mm
  • 2 pieces will be needed
0,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 732

Petrol filter universal

Gasoline filter for the universal duty.
The filter will be mounted between the fuel line.
  • connection diameter: 6 and 8mm
  • material: petrol resistant plastic with parer filter
  • made in Germany
3,73 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7224
The product category Trabant 601 > Spare parts > Carburettor is spread over 10 sites:
12345678910
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Holzeisenbahn