Carburettor and supplies

The complete offer in Carburettor and supplies

Single parts, carburettor H1-1

Carburettor lid seal, rubber (new type)

Spezial rubber seal for carburettor type: carburettor(new type) Typ 28H1.
The carburettor cap is fixed with 4 bolts M6.
The seal is manufactured in Germany and fit brilliant.

material: fuel resistant rubber, colour black
fit to Trabant 601 from year july 1984
one piece will be needed

3,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 734

Carburettor lid seal, paper (new type)

Detail

Paper seal for carburettor type: carburettor(new type) Typ 28H1.
The carburettor cap is fixed with 4 bolts M6.
The seal is made in EU, worse quality.

material: simple sealing paper
fit to Trabant 601 from year july 1984
one piece will be needed

0,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7834

Float ( new carburettor )

Detail

For carburettor type 28H 1-1

material: bras-gauge
for Trabant carburettor from vintage: july 1984
one piece will be needed

14,30 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 741

Carburettor idler air jet (M6-100)

Detail

Nozzle as idling air jet for the Trabant carburettor called BVF H1-1
This nozzle is mountet inside of the Carburettor case. For dismounting and mounting is it necessitating to dismount the intake pipe.
Exact mounting place: please click on Detail

Jet size: 100
Jet thread: M6x0,75
delivery as single part
one piece will be needed

5,69 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8574

O-ring-sealing for mixture screw 28H1-1

Detail

Rubber O-ring sealing for the big mixture screw of the carburettor type 28H1-1 (last variant of Trabant 601 carburettor)
Mounting place: on top of the carburettor towards engine flange.

material: spezial heat and fuel restistant rubber
one piece will be needed

1,33 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8192

Idle mixture screw carburettor BVF 28H1-1

Detail

Big idle mixture screw of the carburettor type BVF 28H1-1 (last variant of Trabant 601 carburettor)
Mounting place: on top of the carburettor towards engine flange.
New produced spare part, made in Germany.

material: brass
delivery inclucive sealing ring
made in Germany
one piece will be needed

12,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8572

O-ring-sealing for mixture screw 28H1-1

Detail

Rubber O-ring sealing for the smallmixture screw of the carburettor type 28H1-1 (last variant of Trabant 601 carburettor)

material: spezial heat and fuel restistant rubber
one piece will be needed

0,89 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8188

Mixture screw carburettor BVF 28H1-1

Detail

Small mixture screw of the carburettor type BVF 28H1-1 (last variant of Trabant 601 carburettor)
Mounting place: side of the carburettor under the chocke control.
New produced spare part, made in Germany.

material: brass
delivery inclucive sealing ring
made in Germany
one piece will be needed

10,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8573

fiber-sealing ring for screw plug of float chamber (28H1-1)

Detail

fiber sealing ring for big screw plug of carburettor type 28H1-1 (last variant of Trabant 601 carburettor
data:

material: fiber sheated plastic
size: 18mm x 22mm x 1,5mm
one piece will be needed

0,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6924

fiber-sealing ring 8x12x1

Detail

Vulkanfiber sealing ring for the main jet sealing bolt and the additional air nozzle for the carburettor type: 28 H1-1
data:

material: fiber sheated plastic
inner diameter: 8 mm
outer diameter: 12 mm
thickness: 1,0mm
three piece will be needed

0,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6697

fiber-sealing ring for screw plug (28H1-1)

Detail

fiber sealing ring for big screw plug of carburettor type 28H1-1 (last variant of Trabant 601 carburettor
data:

material: fiber sheated plastic
size: 18mm x 22mm x 1,5mm
one piece will be needed

0,15 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6925

Sealing throttle shaft 8x16x7

Detail

Sealing ring for the throttle shaft of the carburettor type 28H1-1 (last variant of Trabant 601 carburettor.
The sealing is made of fuel resitant rubber called: FPM / FKM (Viton®)

1dimension: 8x16x7mm
one piece will be needed

4,43 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8470

Connection pipe carburettor (clamp with screws)

Detail

Connection hose for the idle system of the carburettor type 28H1-1 (last variant of Trabant 601 carburettor.

1x plastic hose
2x clamp with bolts
one set will be needed

5,77 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8465

Connection pipe carburettor (1-O clamp)

Detail

Connection hose for the idle system of the carburettor type 28H1-1 (last variant of Trabant 601 carburettor.

1x plastic hose
2x 1-Ear-clamp
one set will be needed

5,77 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8466

Startmixture bowdencable ( new type of carburettor )

Detail

only for carburettor type 28 H 1-1 (last builded type)

total lenght: 125cm

34,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 751

Self-repair-set PLUS carburettor ( new type )

Detail

Repeirset for Trabant carburettor typ 28 HB 1-...
fir to all carburettors from vintage: july 1984.
set consist of:

1x gauge needle valve
5x nozzle (40, 45, 75, 100, 115)
1x CO-bolt with sealing ring
1x tick-over bolt with sealing ring
1x float
1x carburettor lid seal
2x Sealing carburettor-flange

53,21 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6022

Self-repair-set carburettor ( new type )

Detail

Self-repair-set for carburettor-type: 28 H 1-1
fit to all carburettors from vintage: july 1984.
set consist of:

1x gauge needle valve
5x nozzle (40, 45, 75, 100, 115)
1x CO-bolt with sealing ring (made in Germany)
1x tick-over bolt with sealing ring (made in Germany)

32,81 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 745

1+1

Float needle valve, complete

Detail

The needle velve controls the volume of the float housing.

material: brass
nozzle: 20
typ: tongued
fit to all Trabant carburettor typs
one piece will be needed

11,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 742

fiber-sealing ring for needle valve

Detail

fiber sealing ring for float needle valve, fit to Trabant, Wartburg, Barkas, ZW1103.
data:

material: fiber sheated plastic
size: 10mm x 14mm x 1,0mm
one piece will be needed

0,35 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6540

Single parts carburettor type: 28HB

Carburettor lid seal ( old type)

Detail

Rubber seal for carburettor cap. carburettor(old type) Typ 28HB1-...
The carburettor cap is fixed with 3 bolts M6.
This sealing is an reproduction in best quality

fit to Trabant 600 and 601 up to year july 1984
New production, made in Germany
one piece will be needed

3,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 735

Float plastic (old carburettor)

Detail

Float made of special plastic fit for carburettor type 28HB 1-...

material: plastic-gauge, stainless steel hinges
for Trabant carburettor up to vintage: july 1984
one piece will be needed

19,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8430

Float ( old carburettor )

Detail

Float for carburettor type 28HB 1-...

material: brass-gauge
for Trabant carburettor up to vintage: july 1984
one piece will be needed

13,78 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 740

Mounting screws for flot chamber carburettor

Detail

One set of mounting screws for the flot chamber carburettor.
Fit to all BVF carburettors 28HB..

contens: 3x screws, 3x secure washer
one set will be needed

2,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8559

Starter top part ( old type of carburettor )

Detail

For carburettor types:

28 HB 2
28 HB 3-1
28 HB 4-1
original spare part
one piece will be needed

58,11 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6183

Mounting screws for starter top part carburettor

Detail

one set of mounting screws for choke carburettor.
Fit to all BVF carburettors 28HB..

contens: 4 pieces
one set will be needed

2,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8558

Startmixture bowdencable ( old type of carburettor )

Detail

For carburettor types:

28 HB 2
28 HB 3-1
28 HB 4-1
total length: 110cm

57,88 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 752

Mounting screws for starter cable

Detail

One set of mounting screws for choke cable
Fit to all BVF carburettors 28HB..

contens: 2 pieces
one set will be needed

2,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8567

Mounting screw for intake pipe carburettor

Detail

One set of mounting screw for the intake pipe carburettor.
Fit to all BVF carburettors 28HB..

contens: 1x screws, 1x secure washer
one piece will be needed

1,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8560

Self-repair-set PLUS carburettor ( old type )

Detail

Repeirset for Trabant carburettor typ 28 HB 1-...
Fit to all carburettors up to vintage: july 1984.
Set consist of:

36,03 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6021

Self-repair-set carburettor ( old type )

Detail

Self-repair-set for carburettor-type 28 HB 1-...
fit to all carburettors up to vintage: july 1984.
set consist of:

1x gauge needle valve
3x nozzle (50, 115, 125)
1x CO-bolt with sealing ring

23,74 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 744

Fiber-sealing ring 6x9x1

Detail

Fiber sealing ring for sealing the bolt of the idler jet (LD45) and the air inlet nozzle (SD120).
Fit to some types of the carburettor 28HB.
This sealing rings are made for the exact fitting and sealing of this components.
data:

material: fiber sheated plastic
inner diameter: 6 mm
outer diameter: 9 mm
thickness: 1,0mm
two pieces will be needed

1,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8191

Idler jet (LD45)

Detail

Idler jet (LD45)fit to all types of the carburettor 28HB up tp type 28HB 3-1.

material: brass
made in Germany
one pieces will be needed

14,88 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8650

air inlet jet (SD120)

Detail

The air inlet nozzle (SD120) fit to all types of the carburettor 28HB.

material: brass
made in Germany
one pieces will be needed

14,88 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8651

Fiber-sealing ring 11x15x1

Detail

Fiber sealing ring for the main jet sealing bolt carburettor type 28HB.
Fit to the type with spanner gap: SW14
data:

material: fiber sheated plastic
inner diameter: 11 mm
outer diameter: 15 mm
thickness: 1,0mm
one piece will be needed

1,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8190

Retainer for main jet, SW14

Detail

Holder for main jet of the Trabant BVF carburettor type HB 1-.
This type is with spanner gap SW14 and threat M11.

delivery as single part
without jet and without sealing
material: brass
threat: M10x1
threat for nozzle: M5
one piece will be needed

9,52 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8545

Fiber-sealing ring 10x14x1

Detail

Fiber sealing ring for the main jet sealing bolt carburettor type 28HB.
Fit to the type with spanner gap: SW13
data:

material: fiber sheated plastic
inner diameter: 10 mm
outer diameter: 14 mm
thickness: 1,0mm
one piece will be needed

0,15 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8189

Retainer for main jet, SW13

Detail

Holder for main jet of the Trabant BVF carburettor type HB 1-.
This type is with spanner gap SW13 and threat M10.

delivery as single part
without jet and without sealing
material: brass
threat: M10x1
one piece will be needed

9,52 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8525

Mixture screw carburettor BVF 28HB 3-1 / 4-1

Detail

Small mixture screw of the carburettor type BVF 28HB 3-1 and 28HB 4-1 Trabant 601 carburettor.
Mounting place: on top of the carburettor towards engine flange.
New produced spare part, made in Germany.

material: brass
delivery inclucive sealing ring
made in Germany
one piece will be needed

10,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8617

Main jet M5, 115 (standard)

Detail

Main jet of the Trabant BVF carburettor type HB 1-.
Fit for jet retainer with threat M5.

delivery as single part
threat: M5
material: brass
nozzle size: 115
one piece will be needed

2,61 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8526

Main jet M5, 120

Detail

Main jet of the Trabant BVF carburettor type HB 1-.
Fit for jet retainer with threat M5.

delivery as single part
threat: M5
material: brass
nozzle size: 120
one piece will be needed

2,61 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8527

Main jet M5, 125

Detail

Main jet of the Trabant BVF carburettor type HB 1-.
Fit for jet retainer with threat M5.

delivery as single part
threat: M5
material: brass
nozzle size: 125
one piece will be needed

2,61 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8528

Main jet M5, 130

Detail

Main jet of the Trabant BVF carburettor type HB 1-.
Fit for jet retainer with threat M5.

delivery as single part
threat: M5
material: brass
nozzle size: 130
one piece will be needed

2,61 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8529

Main jet M5, 135

Detail

Main jet of the Trabant BVF carburettor type HB 1-.
Fit for jet retainer with threat M5.

delivery as single part
threat: M5
material: brass
nozzle size: 135
one piece will be needed

2,61 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8530

Main jet M5, 140

Detail

Main jet of the Trabant BVF carburettor type HB 1-.
Fit for jet retainer with threat M5.

delivery as single part
threat: M5
material: brass
nozzle size: 140
one piece will be needed

2,61 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8531

Main jet M5, 150

Detail

Main jet of the Trabant BVF carburettor type HB 1-.
Fit for jet retainer with threat M5.

delivery as single part
threat: M5
material: brass
nozzle size: 150
one piece will be needed

2,61 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8532

Carburettor idler air jet (M6-150)

Detail

Nozzle as idling air jet for the Trabant carburettor called BVF HB
This nozzle is mountet inside of the Carburettor case. For dismounting and mounting is it necessitating to dismount the intake pipe.
Exact mounting place: please click on Detail

Jet size: 150
Jet thread: M6
delivery as single part

4,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8543

Sealing plug for carburettor slide jet

Detail

New producted sealing screw as single part for sealing the slide jet at the carburettor.
Useable for the carburettor types: BVF HB2-9 and HB4- .

material: steel
surface: galvaniced
spanner gap: SW11
made in Germany
Carburettor type 28HB 2-9: One piecs will be needed
Carburettor type 28HB 3- and HB 4-: Two pieces will be needed

5,21 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8562

Slide jet carburettor HB 3- and HB 4-

Detail

Single part slide jet at the carburettor.
Useable for the carburettor types: BVF HB3- and HB 4- .
Mounting position on top of the carburettor flange (under the cover screw LDM-part.no.: 8562)

material: brass
threat: M5
One piecs will be needed

2,61 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8660

Sealing ring carburettor slide jet 8 x 11 x 1,0

Detail

Special made fiber sealing as single part for sealing the brass air slide jet or the sealing plug (cover of the slide jet)
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettor types: BVF Vergaser ab HB2-9 und HB4-
size:

inside diameter: 8,2mm
outside diameter: 11mm
thickness: 1,0mm
two pieces will be needed

1,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8565

Air jet with pipe

Detail

Air nozzle with mixing pipe fit to the carburettor type HB 1-... up to vintage: July 1981.

material: brass
threat: M7x1
Nozzle size: 150
Reproduction
one piece will be needed

14,22 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8429

Sealing ring for atomizer

Detail

Sealing for the atomizer jet fit to the carburettor type HB 1-... up to vintage: July 1981.

material: sealing paper
Reproduction in Germany
one piece will be needed

1,49 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8551

Mounting screw for atomizer

Detail

Mounting bolt for the atomizer jet fit to the carburettor type HB 1-... up to vintage: July 1981.
Please note: It is essential to use a screw locking device / fluid! Otherwise heavy engine demages are possible.

2 piece will be needed

0,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8552

Mounting set for throttle valve shaft

Detail

Mounting kit for throttle valve shaft. Fit to carburettor type HB 1-... up to vintage: July 1984.

contens: 1x hexagon nut, 1x secure washer
one kit will be needed

1,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8557

Spring for idle screw, carburettor 28HB

Detail

Pressure coil-spring for idle adjusting screw at the carburettor.
Fit for: BVF carburettor 28HB: Trabant 500,600 and 601.

delivery as single part
surface: galvaniced
made in Germany
one piece will be needed

1,49 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8563

Idle screw, carburettor 28HB

Detail

Screw for idle adjusting at the carburettor.
Fit for: BVF carburettor 28HB: Trabant 500,600 and 601.

delivery as single part
surface: galvaniced
one piece will be needed

0,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8564

U-bolt for throttle valve shaft

Detail

U-bolt for throttle valve. Fit to carburettor type HB 1-... up to vintage: July 1981.

material: formed matal, galvaniced
Reproduction
one piece will be needed

26,82 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6545

Retainer-bolt for throttle valve shaft

Detail

Special retainer screw for the throttle valve. Fit to carburettor type HB 1-... up to vintage: July 1981.

material: steel, galvaniced
new German reproduction
one piece will be needed

3,76 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8576

Isolating plate carburettor-flange

Detail

This isolating plate is an heating protection between engine and carburettor. The mounting will be at the carburettor-flange (engine side) between two of carburettor-flange sealings.

fit to all Trabant with two stroke engine
material: pressed fiber paper
thickness: 2mm
one piece will be needed

2,54 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 733

Sealing ( carburettor-flange )

Detail

Paper seal between engine flange - isolating plate carburettor - carburettor. Fit to all models of Trabant 500, 600 und 601.

material: fuel resistant sealing paper
high quality
made in Germany
thickness: 0,5 mm
2 pieces will be needed

0,89 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 732

Petrol filter universal

Detail

Gasoline filter for the universal duty.
The filter will be mounted between the fuel line.

connection diameter: 6 and 8mm
material: petrol resistant plastic with parer filter
price per piece

3,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7224

Fuel hoses with different diameters

Fuel hose, 5,5 mm with texture

Detail

Flexible fuel hose with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.

inside diameter: 5,5mm
material: petrol resistant rubber with outside texture
made in Germany

priece per Meter: 5,14 Euro

5,14 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 728

Fuel hose, 8 mm (insde diameter)

Detail

inside diameter: 8 mm
material: petrol resistant rubber with outside texture
made in Germany

priece per Meter: 6,22 Euro

6,22 €inclusive VAT, plus shipping costs

Delivery in 5 days.

Art.No. 729

Delivery only at advance payment.

Hose clip for fuel hose, 8 mm with texture

Detail

Clamp fpr flexible fuel hose (8mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!

max.diameter: 13mm
wide: 9mm
re-usable

1,89 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8159

Hose clip for fuel hose, 8 mm with texture

Detail

max.diameter: 13 mm
wide: 9,5mm
re-usable

1,35 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8160

Hose clip for fuel hose, 7,5 mm with rubber surface

Detail

Clamp fpr flexible fuel hose (8mm inside diameter).
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!

max.diameter: 14 mm
wide: 8,5mm
re-usable

1,05 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8164

Hose clip for fuel hose, 6 mm with rubber surface

Detail

Clamp fpr flexible fuel hose (6mm inside diameter).
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!

max.diameter: 12 mm
wide: 8,5mm
re-usable

1,05 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8161

Rubber Fuel hose, 7,5 mm

Detail

Flexible fuel hose with inside texture and rubber surface. Inside diameter 7,5mm.
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.

inside diameter: 7,5 mm
material: petrol resistant rubber with inside texture
made in Germany

price per meter: 5,10 Euro

5,10 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6308

Rubber Fuel hose, 6 mm

Detail

Flexible fuel hose with inside texture and rubber surface.
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.

inside diameter: 5,5 mm
material: petrol resistant rubber with inside texture
made in Germany

priece per meter: 4,93 Euro

4,93 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7113

carburettor hose

Detail

Connection hose form air-filter box to carburettor. Fit to all Trabant carburetors (old type of carburettor and new type of carburettor)with two stroke engine.

material: rubber
average lenght: 390 mm, at 120 mm - 45 degrees convoluted
outside diameter: 55 mm
inside diameter: 46mm
one piece will be needed

19,04 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 730

fiber-sealing ring 12x19x1,5 for carburettor

Detail

fiber sealing ring for banjo screw of carburettor:

for direct connection of fuel hose metal coat
for fuel hose connector if you use common fuel hose (yard goods)

data:

material: fiber sheated plastic
inner diameter: 12 mm
outer diameter: 19 mm
thickness: 1,5 mm
2 pieces will be needed for one banjo screw

0,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6428

Aluminium-sealing ring 12x18x1,5 for carburettor

Detail

Aluminium sealing ring for banjo screw of fuel cock:

for direct connection of fuel hose metal coat
for fuel hose connector if you use common fuel hose (yard goods)

data:

material: aluminium
inner diameter: 12 mm
outer diameter: 18 mm
thickness: 1,5 mm
2 pieces will be needed for one banjo screw

0,19 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6427

Ring eye D12mm, connection 6mm hose

Detail

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm

Eye diameter: 12mm
diameter pipe connection: 6mm

4,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7539

Ring eye D12mm, connection 8mm hose

Detail

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm

Eye diameter: 12mm
diameter pipe connection: 8mm

5,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7540

Ring eye D10mm, connection 8mm hose

Detail

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm

Eye diameter: 10mm
diameter pipe connection: 8mm

4,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7538

Ring eye D12mm with pipe bend

Detail

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm

Eye diameter: 12mm
diameter pipe connection: 8mm
pipe bend: 90 degree
pipe length total: 74mm

15,38 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7517

Ring eye D10mm, connection 6mm hose

Detail

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm

Eye diameter: 10mm
diameter pipe connection: 6mm

4,60 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7537

Banjo screw, carburettor

Detail

banjo screw for connection flexible fuel hose with matal or normal fuel hose at the carburettor.

thread: M12 x 1,5
spanner gap: 14
one piece will be needed

4,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6539

Ring eye D10mm with pipe bend

Detail

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm

Eye diameter: 10mm
diameter pipe connection: 6mm
pipe bend: 90 degree
pipe length total: 55mm

14,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7516

T-hose connector 6mm

Detail

Flexible pipe connector for three hoses.
Useable for fuel hoses with 6mm inside diameter.

material: plastic (Polyamid)
can be also installed at water, air, oil systems

2,49 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7957

Fuel hose set for KMVA

Detail

Complete premounted hose set for the Trabant 601 with fuel isplay for rate of flow.

made in Germany
fuel hose with fabric surface
one set will be needed

35,15 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7544

Fuel hose, rubber coat

Detail

Flexible fuel hose complete with rubber coat. Fit between petrol tank and carburettor. For all kind of Trabant (2-stroke) without display for rate of flow.
Fit for carburettor types: 28HB and 28H.
Complete pre assembled fuel hose with ring eyelets.

length: 740mm
material: fuel resitant rubber
delivery without mounting parts like selaing rings and banjo bolt
one piece will be needed

19,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 731

Carburettor 28HB, complete overhauled, exchange part

Detail

Complete overhauled carburettor type: 28HB..for Trabant 500, 600 and 601 up to vintage: July 1984.
Delivery only in exchange after you shiped your old carburettor to our company in advance.

Delivery only in exchange! Please send in advance one carburettor 28HB 4- to our company.

200,00 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 739

Carburettor 28H1-1, complete overhauled

Detail

Complete overhauled carburettor for Trabant 601 from vintage: july 1984.
Delivery only in exchange after you shiped your old carburettor to our company in advance.

Delivery only in exchange! Please send in advance one carburettor 28H1-1 to our company.

282,82 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 743

Carburettor 28HB 4-

Detail

Overhauled carburettor BVF HB4-. Fit to Trabant 601.
Delivery only in exchange after you shiped your old carburettor to our company in advance.

Delivery only in exchange! Please send in advance one carburettor 28HB 4- to our company.

225,00 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7044

Throttle bowdencable,EU

Detail

Cheaper replacement for the original bowdencable.
It is the connection between the throttle control and throttle valve carburettor. Fit to carburettor type Block carburettor 28 HBand economizing carburettor 28H Trabant 500, 600 and 601

made in EU
length total: 920 mm
lenght bowden sheathing: 780 mm
diameter steel wire: 2 mm
diameter bowden sheathing: 5,5 mm
one piece will be needed

14,04 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7815

Throttle bowdencable, original

Detail

Bowdencable is the connection between the throttle control and throttle valve carburettor. Fit to carburettor type Block carburettor 28 HBand economizing carburettor 28H Trabant 500, 600 and 601

original spare part, best quality NOS
length total: 920 mm
lenght bowden sheathing: 780 mm
diameter steel wire: 2 mm
diameter bowden sheathing: 5,5 mm
one piece will be needed

original spare part

35,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 750

Adjusting screw for carburettor bowdencable

Detail

Bowdencable adjusting screw for the throttle control Trabant 500, 600 and 601.

length total: 48 mm
thread: M8
one piece will be needed

2,98 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6547

1+1

U-bolt for Carburettor

Detail

clamp for throttle valve. Fit to all Trabant 601 carburettors without vintage limit (carburettor type HB and H1-1).

material: formed matal, galvaniced
original spare part
one piece will be needed

11,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6543

Bolt for U-bolt

Detail

Bolt for clamp throttle valve.Fit to all Trabant 601 carburettors without vintage limit (carburettor type HB and H1-1).

material: steel pin
original spare part
one piece will be needed

2,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6544

Release spring for Carburettor

Detail

Release spring for throttle valve

length total: 43 mm
diameter: 13 mm
galvaniced
one piece will be needed

2,39 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6542

Splicing plate for release spring

Detail

Cover plate for mounting at the engine. The release spring will be lowered in to release the carburettor cable. The spare part is new and made of stainless steel.

thickness: 1 mm
made in Germany
one piece will be needed

1,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7272

Stud M8 x 40

Detail

Plain stud thread on bouth ends diameter M8 length 40mm fit to:

5,65 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6334

Hose clip for fuel hose 7,5 mm with rubber surface

Detail

Clamp fpr flexible fuel hose (7,5mm inside diameter) with inside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!

max.diameter: 14mm
wide: 9mm
re-usable

1,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8163

Hose clip for fuel hose 6 mm with rubber surface

Detail

Clamp fpr flexible fuel hose (6mm inside diameter) with inside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!

max.diameter: 12mm
wide: 9mm
re-usable

1,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8162

Hose clip for fuel hose 5,5 mm with texture

Detail

Clamp for flexible fuel hose (5,5mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!

max.diameter: 11mm
wide: 9mm
re-usable

1,47 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6197

Hose clip for fuel hose, 8 mm with texture

Detail

Clamp fpr flexible fuel hose (5,5mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!

max.diameter: 12 mm
wide: 8,5mm
re-usable

1,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6203

Hose clip 7 - 11 / 5 stainless steel Detail Hose clips made of stainless steel, for fuel hoses from diameter 7mm up to 11mm. The wide of the clip is 5mm.
2,85 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6035