This site in german: Trabant 601 > Ersatzteile > Vergaser 
You are here: > Trabant 601> Spare parts> Carburettor
Navigation

Carburettor and supplies

The product category Trabant 601 > Spare parts > Carburettor is spread over 11 sites:

1234567891011
Show all products

Ring eye D10mm, connection 6mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
  • Eye diameter: 10mm
  • diameter pipe connection: 6mm
4,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7537

Banjo screw, carburettor

banjo screw for connection flexible fuel hose with matal or normal fuel hose at the carburettor.
  • thread: M12 x 1,5
  • spanner gap: 14
  • one piece will be needed
4,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6539

Ring eye D10mm with pipe bend

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
  • Eye diameter: 10mm
  • diameter pipe connection: 6mm
  • pipe bend: 90 degree
  • pipe length total: 55mm
14,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7516

T-hose connector 6mm

Flexible pipe connector for three hoses.
Useable for fuel hoses with 6mm inside diameter.
  • material: plastic (Polyamid)
  • can be also installed at water, air, oil systems
2,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7957

Fuel hose set for KMVA

Complete premounted hose set for the Trabant 601 with fuel isplay for rate of flow.
  • made in Germany
  • fuel hose with fabric surface
  • one set will be needed
35,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7544

Fuel hose, rubber coat

Flexible fuel hose complete with rubber coat. Fit between petrol tank and carburettor. For all kind of Trabant (2-stroke) without display for rate of flow.
Fit for carburettor types: 28HB and 28H.
Complete pre assembled fuel hose with ring eyelets.
  • length: 740mm
  • material: fuel resitant rubber
  • delivery without mounting parts like selaing rings and banjo bolt
  • one piece will be needed
19,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 731

Carburettor 28HB, complete overhauled, exchange part

Complete overhauled carburettor type: 28HB..for Trabant 500, 600 and 601 up to vintage: July 1984.
Delivery only in exchange after you shiped your old carburettor to our company in advance.
Delivery only in exchange! Please send in advance one carburettor 28HB 4- to our company.
200,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 739

Carburettor 28H1-1, complete overhauled

Complete overhauled carburettor for Trabant 601 from vintage: july 1984.
Delivery only in exchange after you shiped your old carburettor to our company in advance.
Delivery only in exchange! Please send in advance one carburettor 28H1-1 to our company.
282,82 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 743

Carburettor 28HB 4-

Overhauled carburettor BVF HB4-. Fit to Trabant 601.
Delivery only in exchange after you shiped your old carburettor to our company in advance.
Delivery only in exchange! Please send in advance one carburettor 28HB 4- to our company.
225,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7044

Throttle bowdencable,EU

Cheaper replacement for the original bowdencable.
It is the connection between the throttle control and throttle valve carburettor. Fit to carburettor type Block carburettor 28 HBand economizing carburettor 28H Trabant 500, 600 and 601
  • made in EU
  • length total: 920 mm
  • lenght bowden sheathing: 780 mm
  • diameter steel wire: 2 mm
  • diameter bowden sheathing: 5,5 mm
  • one piece will be needed
14,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7815

Throttle bowdencable, original

Bowdencable is the connection between the throttle control and throttle valve carburettor. Fit to carburettor type Block carburettor 28 HBand economizing carburettor 28H Trabant 500, 600 and 601
  • original spare part, best quality NOS
  • length total: 920 mm
  • lenght bowden sheathing: 780 mm
  • diameter steel wire: 2 mm
  • diameter bowden sheathing: 5,5 mm
  • one piece will be needed
original spare part
35,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 750
The product category Trabant 601 > Spare parts > Carburettor is spread over 11 sites:
1234567891011
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Holzeisenbahn