Home
Impressum
Terms of business
Basket
You are here: >
Trabant 601
>
Spare parts
>
fuel system
Shop
IFA engine
pistons
IFA-vehicles
Framo
P70 / F8 / F9
W50/L60
Trabant 500/600
Wartburg 311 / 312 / 313
Multicar M22
Multicar M24
Multicar M25
Multicar M26
Multicar M27
Trabant 601
Spare parts
Exhaust system
Brakes
Front brake
Rear brake
Brake line
Brake master cylinder
Electrical system
Dynamo
Ignition
Starter
Lighting
fuel system
2-stroke oil
Carburettor
Engine
clutch
Extension parts
Piston and Cylinder
Gearbox
Driven shaft
add-on components
Front axle
Suspension
Steering
Track rod
steering knuckles & wishbone
Rear axle
suspension
wheel nuts
Panes & rubber sections
wind screen washer system
Body
mudguards
wheel houses
bumper bar
door parts
Engine compartment
inner room
rear door estate car
Accessories
Badges
Carpet set
Key fob, Key figure
Letterings and Trademarks
valve caps
Tuning parts
Engine
Brakes
Revolution counter
Electrical system
LDM-design-line
Soundboards
Spoiler
wheel spacer
Suspension
Roll bar
roll-cage
valve caps
complete cars
Trabant 1.1
Spare parts
Tuning parts
Wartburg 353
Spare parts
Tuning parts
Wartburg 1.3
Spare parts
Tuning parts
Barkas B 1000
Spare parts
Ball joints, accessories
Boots for ball joints
Skoda
Trailer
Bastei-camper
Camptourist / Klappfix
Intercamp / Oase
Qek-camper
Special made
Bulbs
12Volt
6Volt
24 Volt
connecting wire and accessory
bicolored car wires
Single colour wire
manufactured wires
workshop requirement
hose clips
tools
Lubricants
Mounting parts
fuel tank coating
Protection equipment
Varnish and paint
Accessory
Corrosion protection
adhesive bonded joint
Bowden cable
Carburetor jets
care products
Antifriction bearing
Grooved ball bearing
Cylindrical roller bearing
oils
Special items
Service
privacy policy
Terms of business
Used Oil disposal
Taking back of batterys
Downloads
shipping costs
Favorite links
Impressum
Produktindex
Search
Basket
spare parts for the fuel system Trabant 601
Category spare parts for the fuel system Trabant 601 has the subcategory
2-stroke oil
The product category
Trabant 601 > Spare parts > fuel system
is spread over 7 sites:
1
2
3
4
5
6
7
Show all products
Fuel tank plug with trademark ( S ), polished
Detail
Plug for Trabant 500,600,601 with stamped trademark.
Super quality
material: aluminium, polished
made in EU
32,13 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 1241
Fuel dip stick
Detail
Fit to all Trabant with two stroke engine.
material: plastic, black
scaling: 2-24 liter
length: 28 cm
made in EU
5,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 1111
Aluminium-sealing ring 12x18x1,5 for carburettor
Detail
Aluminium sealing ring for banjo screw of fuel cock:
for direct connection of fuel hose metal coat
for fuel hose connector if you use common fuel hose (yard goods)
data:
material: aluminium
inner diameter: 12 mm
outer diameter: 18 mm
thickness: 1,5 mm
2 pieces will be needed for one banjo screw
0,19 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6427
fiber-sealing ring 8x12x1
Detail
Vulkanfiber sealing ring for the main jet sealing bolt and the additional air nozzle for the carburettor type: 28 H1-1
data:
material: fiber sheated plastic
inner diameter: 8 mm
outer diameter: 12 mm
thickness: 1,0mm
three piece will be needed
0,20 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6697
Fiber-sealing ring 6x9x1
Detail
Fiber sealing ring for sealing the bolt of the idler jet (LD45) and the air inlet nozzle (SD120).
Fit to some types of the carburettor 28HB.
This sealing rings are made for the exact fitting and sealing of this components.
data:
material: fiber sheated plastic
inner diameter: 6 mm
outer diameter: 9 mm
thickness: 1,0mm
two pieces will be needed
1,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8191
Fiber-sealing ring 10x14x1
Detail
Fiber sealing ring for the main jet sealing bolt carburettor type 28HB.
Fit to the type with spanner gap: SW13
data:
material: fiber sheated plastic
inner diameter: 10 mm
outer diameter: 14 mm
thickness: 1,0mm
one piece will be needed
0,15 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8189
Fiber-sealing ring 11x15x1
Detail
Fiber sealing ring for the main jet sealing bolt carburettor type 28HB.
Fit to the type with spanner gap: SW14
data:
material: fiber sheated plastic
inner diameter: 11 mm
outer diameter: 15 mm
thickness: 1,0mm
one piece will be needed
1,95 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8190
fiber-sealing ring 12x19x1,5 for carburettor
Detail
fiber sealing ring for
banjo screw of carburettor
:
for direct connection of fuel hose metal coat
for fuel hose connector if you use common fuel hose (yard goods)
data:
material: fiber sheated plastic
inner diameter: 12 mm
outer diameter: 19 mm
thickness: 1,5 mm
2 pieces will be needed for one banjo screw
0,20 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6428
Aluminium-sealing ring 10x14x1 for fuel cock
Detail
Aluminium sealing ring for banjo screw of fuel cock:
for direct connection of fuel hose metal coat
for fuel hose connector if you use common fuel hose (yard goods)
data:
material: aluminium
inner diameter: 10 mm
outer diameter: 14 mm
thickness: 1 mm
2 pieces will be needed for one banjo screw
0,14 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6383
fiber-sealing ring for fuel cock
Detail
fiber sealing ring for banjo screw of fuel cock:
for direct connection of fuel hose metal coat
for fuel hose connector if you use common fuel hose (yard goods)
also fit for
upper strainer of fuel cock
data:
material: fiber sheated plastic
inner diameter: 10 mm
outer diameter: 14 mm
thickness: 1 mm
2 pieces will be needed for one banjo screw
0,10 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6546
The product category
Trabant 601 > Spare parts > fuel system
is spread over 7 sites:
1
2
3
4
5
6
7
Show all products
* All prices inclusive VAT and plus
shipping costs
.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
Werbung:
Pocketbike