Home
Impressum
Terms of business
Basket
You are here: >
Trabant 601
>
Spare parts
>
fuel system
Shop
IFA engine
pistons
IFA-vehicles
Framo
P70 / F8 / F9
W50/L60
Trabant 500/600
Wartburg 311 / 312 / 313
Multicar M22
Multicar M24
Multicar M25
Multicar M26
Multicar M27
Trabant 601
Spare parts
Exhaust system
Brakes
Front brake
Rear brake
Brake line
Brake master cylinder
Electrical system
Dynamo
Ignition
Starter
Lighting
fuel system
2-stroke oil
Carburettor
Engine
clutch
Extension parts
Piston and Cylinder
Gearbox
Driven shaft
add-on components
Front axle
Suspension
Steering
Track rod
steering knuckles & wishbone
Rear axle
suspension
wheel nuts
Panes & rubber sections
wind screen washer system
Body
mudguards
wheel houses
bumper bar
door parts
Engine compartment
inner room
rear door estate car
Accessories
Badges
Carpet set
Key fob, Key figure
Letterings and Trademarks
valve caps
Tuning parts
Engine
Brakes
Revolution counter
Electrical system
LDM-design-line
Soundboards
Spoiler
wheel spacer
Suspension
Roll bar
roll-cage
valve caps
complete cars
Trabant 1.1
Spare parts
Tuning parts
Wartburg 353
Spare parts
Tuning parts
Wartburg 1.3
Spare parts
Tuning parts
Barkas B 1000
Spare parts
Ball joints, accessories
Boots for ball joints
Skoda
Trailer
Bastei-camper
Camptourist / Klappfix
Intercamp / Oase
Qek-camper
Special made
Bulbs
12Volt
6Volt
24 Volt
connecting wire and accessory
bicolored car wires
Single colour wire
manufactured wires
workshop requirement
hose clips
tools
Lubricants
Mounting parts
fuel tank coating
Protection equipment
Varnish and paint
Accessory
Corrosion protection
adhesive bonded joint
Bowden cable
Carburetor jets
care products
Antifriction bearing
Grooved ball bearing
Cylindrical roller bearing
oils
Special items
Service
privacy policy
Terms of business
Used Oil disposal
Taking back of batterys
Downloads
shipping costs
Favorite links
Impressum
Produktindex
Search
Basket
spare parts for the fuel system Trabant 601
Category spare parts for the fuel system Trabant 601 has the subcategory
2-stroke oil
The product category
Trabant 601 > Spare parts > fuel system
is spread over 7 sites:
1
2
3
4
5
6
7
Show all products
Rubber fuel hose and clamps
Rubber Fuel hose, 6 mm
Detail
Flexible fuel hose with inside texture and rubber surface.
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
inside diameter: 5,5 mm
material: petrol resistant rubber with inside texture
made in Germany
priece per meter: 4,93 Euro
4,93 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7113
Hose clip for fuel hose 6 mm with rubber surface
Detail
Clamp fpr flexible fuel hose (6mm inside diameter) with inside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
max.diameter: 12mm
wide: 9mm
re-usable
1,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8162
Hose clip for fuel hose, 6 mm with rubber surface
Detail
Clamp fpr flexible fuel hose (6mm inside diameter).
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
max.diameter: 12 mm
wide: 8,5mm
re-usable
1,05 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8161
Rubber fuel hose and clamps
Rubber Fuel hose, 7,5 mm
Detail
Flexible fuel hose with inside texture and rubber surface. Inside diameter 7,5mm.
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
inside diameter: 7,5 mm
material: petrol resistant rubber with inside texture
made in Germany
price per meter: 5,10 Euro
5,10 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6308
Hose clip for fuel hose 7,5 mm with rubber surface
Detail
Clamp fpr flexible fuel hose (7,5mm inside diameter) with inside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
max.diameter: 14mm
wide: 9mm
re-usable
1,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8163
Hose clip for fuel hose, 7,5 mm with rubber surface
Detail
Clamp fpr flexible fuel hose (8mm inside diameter).
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
max.diameter: 14 mm
wide: 8,5mm
re-usable
1,05 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8164
fuel stabiliser, 250ml
Detail
for trouble free over-wintering of engines and fuel tanks.
The volume of the boddle protect 50 liter petrol.
priece per Liter: 59,72 Euro
14,93 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6671
Spring for idle screw, carburettor
Detail
Pressur spring for idle adjusting screw at the carburettor.
Fit for:
Straitdraft carburetor H 362- : Wartburg 311, 312 and 313
Straitdraft carburetor H 362- : Framo V901
Straitdraft carburetor H 362- : fire fighter pump TS8
Straitdraft carburetor : P70, F8
Downdraught carburettor BVF36F: Robur LO, Wartburg 353
Downdraught carburettor BVF40F: Wartburg 353, Barkas B1000
Block carburettor 28HB: Trabant 500,600 and 601
delivery as single part
surface: galvaniced
made in Germany
one piece will be needed
1,49 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8459
Throttle bowdencable, original
Detail
Bowdencable is the connection between the throttle control and throttle valve carburettor. Fit to carburettor type
Block carburettor 28 HB
and
economizing carburettor 28H
Trabant 500, 600 and 601
original spare part, best quality NOS
length total: 920 mm
lenght bowden sheathing: 780 mm
diameter steel wire: 2 mm
diameter bowden sheathing: 5,5 mm
one piece will be needed
original spare part
35,20 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 750
Petrol filter 42mm, universal
Detail
Gasoline filter for the universal duty.
The filter will be mounted between the fuel line.
connection diameter: 6 and 8mm
material: petrol resistant plastic with parer filter
price per piece
3,11 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8642
Idler jet (LD45)
Detail
Idler jet (LD45)fit to all types of the carburettor 28HB up tp type 28HB 3-1.
material: brass
made in Germany
one pieces will be needed
14,88 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8650
air inlet jet (SD120)
Detail
The air inlet nozzle (SD120) fit to all types of the carburettor 28HB.
material: brass
made in Germany
one pieces will be needed
14,88 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8651
The product category
Trabant 601 > Spare parts > fuel system
is spread over 7 sites:
1
2
3
4
5
6
7
Show all products
* All prices inclusive VAT and plus
shipping costs
.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
Werbung:
Pocketbike