This site in german: Trabant 601 > Ersatzteile > Kraftstoffsystem 
You are here: > Trabant 601> Spare parts> fuel system

spare parts for the fuel system Trabant 601

Category spare parts for the fuel system Trabant 601 has the subcategory

The product category Trabant 601 > Spare parts > fuel system is spread over 8 sites:

Fiber-sealing ring 6x9x1

Fiber sealing ring for sealing the bolt of the idler jet (LD45) and the air inlet nozzle (SD120).
Fit to some types of the carburettor 28HB.
This sealing rings are made for the exact fitting and sealing of this components.
data:
  • material: fiber sheated plastic
  • inner diameter: 6 mm
  • outer diameter: 9 mm
  • thickness: 1,0mm
  • two pieces will be needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8191

Fiber-sealing ring 10x14x1

Fiber sealing ring for the main jet sealing bolt carburettor type 28HB.
Fit to the type with spanner gap: SW13
data:
  • material: fiber sheated plastic
  • inner diameter: 10 mm
  • outer diameter: 14 mm
  • thickness: 1,0mm
  • one piece will be needed
0,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8189

Fiber-sealing ring 10x14x1

Fiber sealing ring for the main jet sealing bolt carburettor type 28HB.
Fit to the type with spanner gap: SW14
data:
  • material: fiber sheated plastic
  • inner diameter: 11 mm
  • outer diameter: 15 mm
  • thickness: 1,0mm
  • one piece will be needed
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8190

fiber-sealing ring 12x19x1,5 for carburettor

fiber sealing ring for banjo screw of carburettor:
  • for direct connection of fuel hose metal coat
  • for fuel hose connector if you use common fuel hose (yard goods)

data:
  • material: fiber sheated plastic
  • inner diameter: 12 mm
  • outer diameter: 19 mm
  • thickness: 1,5 mm
  • 2 pieces will be needed for one banjo screw
0,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6428

Aluminium-sealing ring 10x14x1 for fuel cock

Aluminium sealing ring for banjo screw of fuel cock:
  • for direct connection of fuel hose metal coat
  • for fuel hose connector if you use common fuel hose (yard goods)

data:
  • material: aluminium
  • inner diameter: 10 mm
  • outer diameter: 14 mm
  • thickness: 1 mm
  • 2 pieces will be needed for one banjo screw
0,14 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6383

fiber-sealing ring for fuel cock

fiber sealing ring for banjo screw of fuel cock:
  • for direct connection of fuel hose metal coat
  • for fuel hose connector if you use common fuel hose (yard goods)

also fit for upper strainer of fuel cock

data:
  • material: fiber sheated plastic
  • inner diameter: 10 mm
  • outer diameter: 14 mm
  • thickness: 1 mm
  • 2 pieces will be needed for one banjo screw
0,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6546

T-hose connector 6mm

Flexible pipe connector for three hoses.
Useable for fuel hoses with 6mm inside diameter.
  • material: plastic (Polyamid)
  • can be also installed at water, air, oil systems
2,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7957

Fuel hose set for KMVA

Complete premounted hose set for the Trabant 601 with fuel isplay for rate of flow.
  • made in Germany
  • fuel hose with fabric surface
  • one set will be needed
28,12 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7544

Fuel hose, metal coat

flexible fuel hose complte with matal coat between petrol tank and carburettor. For all kind of Trabant (2-stroke) without display for rate of flow.
  • length: 740mm
  • one piece will be needed
16,46 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 731
The product category Trabant 601 > Spare parts > fuel system is spread over 8 sites:
12345678
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Pocketbike