This site in german: Trabant 601 > Ersatzteile > Motor 
You are here: > Trabant 601> Spare parts> Engine

spare parts for the motor Trabant 601

Category spare parts for the motor Trabant 601 has the following subcategorys:

The product category Trabant 601 > Spare parts > Engine is spread over 5 sites:

hexagon nut for crankshaft (side of flywheel)

hexagon nut for mounting the flywheel on crankshaft
the lock plate (Art.No. 6130) have to be changed ater every disassembly of the flywheel.
  • turning moment: 137 Nm
  • galvaniced
  • original spare part
  • one piece will be needed
9,21 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6129

lock plate for hexagon nut , crankshaft (side of flywheel)

lock plate for hexagon nut (Art.No. 6130) for mounting the flywheel on crankshaft
  • original spare part
  • one piece will be needed
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6130

Flywheel new version

Complete overhauled flywheel for the Trabant P601 engine. Selaing system with piston rings. Delivery only atr exchange part.
The piston ring sealing will be not part of the delivery.
The sarter gear rim is premounted.
  • exchange part
  • one piece will be needed
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
74,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7106

Sealing ring flywheel new version

Piston ring for sealing the left side of the crankshaft at the Trabant P601 engine.
Mounting place: clutch side.
Fit only to flywheels latest model.
  • price per piece
  • two pieces will be needed
16,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8122

Flywheel old version

Flywheel for the Trabant P601 engine. Selaing system with oil seal.
The shaft sealing will be not part of the delivery.
The sarter gear rim is premounted.
  • original spare part
  • one piece will be needed
82,06 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7105

Sealing for ball bearing cover shaft seal

Paper seal for the ball bearing cover at the crankshaft flywheel side.
Fit to Trabant 500,600 and 601 with the crank sealing system radial oil seal.
Please check at your car what kind of screw you need.
  • spezial paper sealing
  • made in Germany
2,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8015

Sealing for ball bearing cover pistonring seal

Paper seal for the ball bearing cover at the crankshaft flywheel side.
Fit to Trabant 500,600 and 601 with the crank sealing system piston ring sealing.
Please check at your car what kind of screw you need.
  • spezial paper sealing
  • made in Germany
2,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8016

Phillips countersunk-head screw for ball bearing cover

Recessed countersunk-head bolt inclusive gear washer for mounting the ball bearing cover at the crankshaft flywheel side.
Fit to Trabant 500,600 and 601 with the crank sealing system radial oil seal or piston ring seal.
Please check at your car what kind of screw you need.
  • three pieces will be needed
  • surface: galvanized zinc coated, silver
1,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7509

Slotted-head screw for ball bearing cover

Slotted-head screw bolt inclusive gear washer for mounting the ball bearing cover at the crankshaft flywheel side.
Fit to Trabant 500,600 and 601 with the crank sealing system radial oil seal or piston ring seal.
Please check at your car what kind of screw you need.
  • three pieces will be needed
  • surface: galvanized zinc coated, silver
1,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7510
The product category Trabant 601 > Spare parts > Engine is spread over 5 sites:
12345
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Spielfiguren von Papo | Figurenkiste.de - Spielzeugfiguren