Home
Impressum
Terms of business
Basket
You are here: >
Trabant 601
>
Spare parts
>
Engine
Shop
IFA engine
pistons
IFA-vehicles
Framo
P70 / F8 / F9
W50/L60
Trabant 500/600
Wartburg 311 / 312 / 313
Multicar M22
Multicar M24
Multicar M25
Multicar M26
Multicar M27
Trabant 601
Spare parts
Exhaust system
Brakes
Front brake
Rear brake
Brake line
Brake master cylinder
Electrical system
Dynamo
Ignition
Starter
Lighting
fuel system
2-stroke oil
Carburettor
Engine
clutch
Extension parts
Piston and Cylinder
Gearbox
Driven shaft
add-on components
Front axle
Suspension
Steering
Track rod
steering knuckles & wishbone
Rear axle
suspension
wheel nuts
Panes & rubber sections
wind screen washer system
Body
mudguards
wheel houses
bumper bar
door parts
Engine compartment
inner room
rear door estate car
Accessories
Badges
Carpet set
Key fob, Key figure
Letterings and Trademarks
valve caps
Tuning parts
Engine
Brakes
Revolution counter
Electrical system
LDM-design-line
Soundboards
Spoiler
wheel spacer
Suspension
Roll bar
roll-cage
valve caps
complete cars
Trabant 1.1
Spare parts
Tuning parts
Wartburg 353
Spare parts
Tuning parts
Wartburg 1.3
Spare parts
Tuning parts
Barkas B 1000
Spare parts
Ball joints, accessories
Boots for ball joints
Skoda
Trailer
Bastei-camper
Camptourist / Klappfix
Intercamp / Oase
Qek-camper
Special made
Bulbs
12Volt
6Volt
24 Volt
connecting wire and accessory
bicolored car wires
Single colour wire
manufactured wires
workshop requirement
hose clips
tools
Lubricants
Mounting parts
fuel tank coating
Protection equipment
Varnish and paint
Accessory
Corrosion protection
adhesive bonded joint
Bowden cable
Carburetor jets
care products
Antifriction bearing
Grooved ball bearing
Cylindrical roller bearing
oils
Special items
Service
privacy policy
Terms of business
Used Oil disposal
Taking back of batterys
Downloads
shipping costs
Favorite links
Impressum
Produktindex
Search
Basket
spare parts for the motor Trabant 601
Category spare parts for the motor Trabant 601 has the following subcategorys:
clutch
Extension parts
Piston and Cylinder
The product category
Trabant 601 > Spare parts > Engine
is spread over 5 sites:
1
2
3
4
5
Show all products
Wire snap ring
Detail
Wire snap ring for piston pin. You need two pieces for one piston.
Fit to all Trabant 601, Wartburg 353 and B1000 pistons
3,76 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 626
Cylinder head nut comlete with washer
Detail
Cylinder head nut fit to all Trabant 500,600 and 601 with two stroke engine.
strength class: 10.9
scope of delivery complete with washer
4 pieces will be needed for each cylinder
The tighten bolt order and the torque you can find in details!
1,10 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6480
Cylinder head packing (head gasket)
Detail
Cylinder head packing for Trabant 601.
material: aluminium
one piece will be needed for each cylinder
The tighten bolt order and the torque you can find in details!
2,55 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 630
Cylinder base nut with washer
Detail
Cylinder base nut fit to all Trabant 500,600 and 601 with two stroke engine.
strength class: 10.9
scope of delivery complete with washer
4 pieces will be needed for each cylinder (total 8 pieces)
The tighten bolt order and the torque you can find in details!
0,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6481
Cylinder base packing
Detail
Gasket for cylinder base of the Trabant engine. Can be used for all types of two stroke motors of Trabant 500,600 and 601.
material: embossed-sealing paper
one piece will be needed for each cylinder
The tighten bolt order and the torque you can find in details!
5,62 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 631
Ring gear for starter ( 8 mm )
Detail
ring gear for engine starter Trabant 601 up to march 1972. It will be fixed at the fleywheel by shrinking.
width: 8mm
outside diameter: ca.250 mm
inside diameter: ca.228 mm
tooth ratio: 100
one piece will be needed
68,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7795
Ring gear for starter ( 6 mm )
Detail
ring gear for engine starter Trabant 601 from march 1972. It will be fixed at the fleywheel by shrinking.
width: 6mm
outside diameter: ca.250 mm
inside diameter: ca.228 mm
tooth ratio: 100
one piece will be needed
36,59 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 685
hexagon nut for crankshaft (side of V-belt pulley)
Detail
hexagon nut for mounting the V-belt pulley on crankshaft
the lock plate (Art.No. 6128) have to be changed after every disassembly.
turning moment: 54 Nm
original spare part
galvaniced
one piece will be needed
8,41 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6126
lock plate for hexagon nut , crankshaft (side of V-belt pulley)
Detail
lock plate for hexagon nut (Art.No. 6126) for mounting the V-belt pulley on crankshaft
original spare part
one piece will be needed
4,50 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 6128
The product category
Trabant 601 > Spare parts > Engine
is spread over 5 sites:
1
2
3
4
5
Show all products
* All prices inclusive VAT and plus
shipping costs
.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
Werbung:
Spielfiguren von Papo
|
Figurenkiste.de - Spielzeugfiguren