This site in german: Trabant 601 > Ersatzteile > Bremsen > Hauptbremszylinder 
You are here: > Trabant 601> Spare parts> Brakes> Brake master cylinder

1 and 2-circle brake master cylinder

The product category Trabant 601 > Spare parts > Brakes > Brake master cylinder is spread over 3 sites:

Brake master cylinder, two circle, original

Complete in Germany overhauled brake master cylinder.
Type: IFA BHL
Shipping only after your old brake cylinder with the mark IFA BH1 was send to our company.
The 2-circle brake master cylinder was mounted from april 1980 at Trabant 601
it is a brake system with two separate brake circle. One supply the front wheel brakes and one the rear wheel brake cylinders.
The connection for the both front brake tube line is in driving direction at the front end of the brake master cylinder. The main tube line for the rear brake circle will be connected between the connections for the tank for brake fluid 2 circle.
  • complete mounted
  • one piece will be needed

Delivery without exchange part !
without exchange part !
140,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8481

Brake master cylinder, two circle,

The 2-circle brake master cylinder was mounted from april 1980 at Trabant 601
it is a brake system with two separate brake circle. One supply the front wheel brakes and one the rear wheel brake cylinders.
The connection for the both front brake tube line is in driving direction at the front end of the brake master cylinder. The main tube line for the rear brake circle will be connected between the connections for the tank for brake fluid 2 circle.
  • complete mounted
  • one piece will be needed
79,50 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 186
Self repair sets for the Trabant brake master cylinders

Sleeve set dual brake master cylinder, original

Complete repair set for the 2-circle brake master cylinder was mounted from vinatge april 1980 at Trabant 601
it is a brake system with two separate brake circle. One supply the front wheel brakes and one the rear wheel brake cylinders.
  • material: rubber
  • made in Germany
  • one set will be needed
14,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7178

Sleeve set dual brake master cylinder, complete

Complete repair set for the 2-circle brake master cylinder was mounted from vinatge april 1980 at Trabant 601
it is a brake system with two separate brake circle. One supply the front wheel brakes and one the rear wheel brake cylinders.
  • material: rubber
  • made in EU
  • one set will be needed
8,69 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 190

Sleeve set single brake master cylinder, original

Complete repair set for the 1-circle brake master cylinder.
This sleeves was mounted up to vinatge april 1980 at Trabant 601.
Master brake cylinder type: IFA BHL BH7

Repair kit consist of:
1x Ring sealing
1x Cap sealing
1x Cap valve
  • material: brake fluid resistance rubber
  • made in Germany
  • one set will be needed
18,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7284

Sleeve set single brake master cylinder, complete

Complete repair set for the 1-circle brake master cylinder was mounted up to vinatge april 1980 at Trabant 601.
  • material: rubber
  • made in EU
  • one set will be needed
10,45 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 189

Master brake cylinder - one circle, original

Single circle master cylinder used in Trabant 500, 600 and Trabant 601 upt to 03/1980
  • overhauled spare part
  • delivery without reservior for brake fluid and mounting equipment
  • one piece will be needed
  • Please note, we can only exchange you this spare part if you ship 1x used master brake cylinder with the type number TGL BH7 to our company in advance!
76,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7189

Master brake cylinder - one circle, complete

Single circle master cylinder used in Trabant 500, 600 and Trabant 601 upt to 03/1980
  • new produced, made in EU
  • delivery inclusive reservior for brake fluid
  • one piece will be needed
68,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 192

Pipe master brake cylinder - plastic reservoir (100mm)

Special rubber hose (brake fluid resistant) for connection brake fluid reservoir and brake master cylinder.
  • length: 100 mm
  • one piece will be needed
price 10,50 Euro per Meter
1,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 187

Pipe master brake cylinder - plastic reservoir (110mm)

Special rubber hose (brake fluid resistant) for connection brake fluid reservoir and brake master cylinder.
  • length: 110 mm
  • one piece will be needed
price 10,45 Euro per Meter
1,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 188

The product category Trabant 601 > Spare parts > Brakes > Brake master cylinder is spread over 3 sites:
123
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Ersatzteile für Simson und MZ