1 and 2-circle brake master cylinder

The product category Trabant 601 > Spare parts > Brakes > Brake master cylinder is spread over 3 sites:

Tank for brake fluid 2 circle

Reservoir for brake fluid with two glands for Trabant 601 with 2-circle brake master cylinder, from vintage: april 1980.Fit also to Wartburg 353 and 1.3, Barkas B1000 with two circle brake master cylinder and Barkas B1000-1.

scope of delivery: inclusive cap, but without mounting parts
one piece will be needed

from 22,11 € to 15,32 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6142

Tank for brake fluid 1 circle

Detail

Reservoir for brake fluid for Trabant 601 with single-circle brake master cylinder, up to vintage: april 1980 and many trailer and camper with hydraulical brake system

scope of delivery: inclusive cap
one piece will be needed

17,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 191

Cap for brake fluid reservoir

Detail

Special plastic cap for brake fluid tank.
Fit to all reservoirs of the 1- or 2-circle brake master cylinder.
Best quality, made in Germany

delivery inclusive rubber sealing
material: brake fluid resistent plastic
colour: black
one piece will be needed

11,74 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6139

Holder for brake fluid reservoir

Detail

Retaining strap for brake fluid tank, fit to 2-circle brake master cylinder.

delivery as single part, without any mounting bits
material: steel
surface: galvanized
one piece will be needed

8,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7150

Rubber lining made in Germany for brake and clutch pedal-shaft

Detail

Rubber pad for the clutch and brake pedal.
New reproduction made in Germany in brilliant quality.
Fit to many IFA cars like Trabant, P70/F8, Wartburg 311, Multicar...

material: rubber, black
made in Germany
best quality
two pieces will be needed

12,05 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 184

Rubber lining EU for brake and clutch pedal-shaft

Detail

Rubber pad for the clutch and brake pedal.

material: rubber, black
made in EU
worse qulity
two pieces will be needed

8,55 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 8013

release spring for pedal, late model

Detail

release spring fit to brake pedal and clutch pedal of pedal unit
length of the spring coil: 53mm
diameter of the spring coil: 10mm
total length of the spring: ca.122mm
New production in Germany

fit to Trabant 601 and Trabant 1.1
made of stainless steel (VA)
two pieces will be needed

6,43 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6643

release spring for pedal, old model

Detail

release spring fit to brake pedal and clutch pedal of pedal unit
length of the spring coil: 69mm
diameter of the spring coil: 8mm
total length of the spring: ca.160mm
New production made in Germany

fit to Trabant 601
made of stainless steel
two pieces will be needed

6,43 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7372

Foot lever clutch

Detail

Foot lever for the mecanical actuated cluch system of the Trabant 601 and 1,1.

fit to Trabant 601 and Trabant 1,1
scope of delivery without Rubber lining for brake and clutch pedal-shaft
one piece will be needed

24,87 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7127

Foot lever unit ( overhauled )

Detail

Foot lever unit constist of one lever for the hydraulic actuated brake system and one lever for the mechanical actuated cluch system. The set is complete in Germany refreshed and pre-installed.

fit to Trabant 601 and Trabant 1,1
scope of delivery inclusive Rubber lining for brake and clutch pedal-shaft
one piece will be needed

110,45 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 185

Mounting bolt for foot lever unit

Detail

Mounting screw for foot lever unit.

fit to Trabant 601 and Trabant 1,1
scope of delivery inclusive 1x bolt, 1x Washer, 1x spring washer
4 pieces will be needed

1,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8522

Screw-cap for brakeline 4,75x0,7 Trabant Detail Screw-cap for breakline 4,75mm x 0,7mm fit to Trabant 500, 600, 601 and Trabant 1,1
0,92 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 264

The product category Trabant 601 > Spare parts > Brakes > Brake master cylinder is spread over 3 sites:

1 2 3
Show all products

* All prices inclusive VAT and plus shipping costs.