This site in german: Trabant 601 > Ersatzteile > Bremsen > Hauptbremszylinder 
You are here: > Trabant 601> Spare parts> Brakes> Brake master cylinder

1 and 2-circle brake master cylinder

The complete offer in 1 and 2-circle brake master cylinder

Cap for stop-lamp oil-pressure switch

Rubber cap for the brake ligths switch. Best protection for dust and wather.
  • Fit to the vehicles: Trabant 500, 600, 601, 1.1 Wartburg 311, 312, 313, 353, 1.3 Barkas B1000,B1000-1 Framo, Mulicar M22, M24, M26
5,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7308

Stop-lamp oil-pressure switch srew connection

Hydraulic pessure cennected switch for the brake lights.
Type of the switch with srew contacts.
  • delivery as original spare part
  • Fit to the vehicles: Trabant 500, 600, 601, 1.1 Wartburg 311, 312, 313, 353, 1.3 Barkas B1000,B1000-1 Framo, Mulicar M22, M24, M26
11,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7595

Stop-lamp oil-pressure switch pin plug

Hydraulic pessure cennected switch for the brake lights.
Type of the switch with flat plug contacts.
  • connection pins for standard pins 4,8mm
  • high quality EU production
  • Fit to the vehicles: Trabant 500, 600, 601, 1.1 Wartburg 311, 312, 313, 353, 1.3 Barkas B1000,B1000-1 Framo, Mulicar M22, M24, M26
  • one piece will be needed
11,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 102

Banjo screw

Spezial banjo screw to connect the the brake pipe splitter and the two circle brake master cylinder.
  • material: Steel
  • delivery without sealing rings
  • spanner gap 17mm
  • one piece will be needed
9,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7107

4-eye junction for HBZ 1-circle

Four divider for Trabant 601 master brake cylinder singe-circle.
  • material: Steel
  • delivery without sealing rings
  • genine spare part
  • one piece will be needed
9,29 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7909

W-eye junction for HBZ 2-circle

Double divider for Trabant 601 master brake cylinder 2-circle.
  • material: Steel
  • delivery without sealing rings
  • genine spare part
  • one piece will be needed
9,29 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7122

Aluminium-sealing ring 12x18x1,5 brake pipe splitter

Aluminium sealing ring for the connection between brake pipe splitter and brake master cylinder. Fit to Trabant one and two circle brake master cylinders.
  • material: aluminium
  • inner diameter: 12 mm
  • outer diameter: 18 mm
  • thickness: 1,5 mm
  • 2 pieces will be needed
0,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6605
high quality brake fluid in usefull sizes

brake fluid, DOT4, 0,25 litre

for use in Trabant, Wartburg, B1000, trailer and camper with hydraulical brake system and a lot of other car types
  • volume: 250 ml

Additional comment: Notes for used oil disposalLink opens in a new window.
price per liter: 7,96 Euro
1,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6200

brake fluid, DOT4, 0,5 litre

for use in Trabant, Wartburg, B1000, trailer and camper with hydraulical brake system and other cars
  • volume: 500 ml

Additional comment: Notes for used oil disposalLink opens in a new window.
price per Liter: 5,98 Euro
2,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6201

brake fluid, DOT4, 1,0 litre

for use in Trabant, Wartburg, B1000 and other cars
  • volume: 1,0 l
  • norms: FMVSS Nr.116 DOT4 und DOT3, SAEJ1703, DIN/ISO 4925

Additional comment: Notes for used oil disposalLink opens in a new window.
price per Liter: 8,98 Euro
8,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6202

Brake master cylinder, two circle, original

Complete in Germany overhauled brake master cylinder.
Type: IFA BHL
Shipping only after your old brake cylinder with the mark IFA BH1 was send to our company.
The 2-circle brake master cylinder was mounted from april 1980 at Trabant 601
it is a brake system with two separate brake circle. One supply the front wheel brakes and one the rear wheel brake cylinders.
The connection for the both front brake tube line is in driving direction at the front end of the brake master cylinder. The main tube line for the rear brake circle will be connected between the connections for the tank for brake fluid 2 circle.
  • complete mounted
  • one piece will be needed

Please note: You have to ship an original master brake cylinder made by IFA to our company in advance!!
Overhaul part, please send the clutch and clutch disc in advance to our company
98,82 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7165

Brake master cylinder, two circle, original

Complete in Germany overhauled brake master cylinder.
Type: IFA BHL
Shipping only after your old brake cylinder with the mark IFA BH1 was send to our company.
The 2-circle brake master cylinder was mounted from april 1980 at Trabant 601
it is a brake system with two separate brake circle. One supply the front wheel brakes and one the rear wheel brake cylinders.
The connection for the both front brake tube line is in driving direction at the front end of the brake master cylinder. The main tube line for the rear brake circle will be connected between the connections for the tank for brake fluid 2 circle.
  • complete mounted
  • one piece will be needed

Delivery without exchange part !
without exchange part !
140,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8481

Brake master cylinder, two circle,

The 2-circle brake master cylinder was mounted from april 1980 at Trabant 601
it is a brake system with two separate brake circle. One supply the front wheel brakes and one the rear wheel brake cylinders.
The connection for the both front brake tube line is in driving direction at the front end of the brake master cylinder. The main tube line for the rear brake circle will be connected between the connections for the tank for brake fluid 2 circle.
  • complete mounted
  • one piece will be needed
79,50 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 186
Self repair sets for the Trabant brake master cylinders

Sleeve set dual brake master cylinder, original

Complete repair set for the 2-circle brake master cylinder was mounted from vinatge april 1980 at Trabant 601
it is a brake system with two separate brake circle. One supply the front wheel brakes and one the rear wheel brake cylinders.
  • material: rubber
  • made in Germany
  • one set will be needed
14,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7178

Sleeve set dual brake master cylinder, complete

Complete repair set for the 2-circle brake master cylinder was mounted from vinatge april 1980 at Trabant 601
it is a brake system with two separate brake circle. One supply the front wheel brakes and one the rear wheel brake cylinders.
  • material: rubber
  • made in EU
  • one set will be needed
8,69 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 190

Sleeve set single brake master cylinder, original

Complete repair set for the 1-circle brake master cylinder.
This sleeves was mounted up to vinatge april 1980 at Trabant 601.
Master brake cylinder type: IFA BHL BH7

Repair kit consist of:
1x Ring sealing
1x Cap sealing
1x Cap valve
  • material: brake fluid resistance rubber
  • made in Germany
  • one set will be needed
18,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7284

Sleeve set single brake master cylinder, complete

Complete repair set for the 1-circle brake master cylinder was mounted up to vinatge april 1980 at Trabant 601.
  • material: rubber
  • made in EU
  • one set will be needed
10,45 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 189

Master brake cylinder - one circle, original

Single circle master cylinder used in Trabant 500, 600 and Trabant 601 upt to 03/1980
  • overhauled spare part
  • delivery without reservior for brake fluid and mounting equipment
  • one piece will be needed
  • Please note, we can only exchange you this spare part if you ship 1x used master brake cylinder with the type number TGL BH7 to our company in advance!
76,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7189

Master brake cylinder - one circle, complete

Single circle master cylinder used in Trabant 500, 600 and Trabant 601 upt to 03/1980
  • new produced, made in EU
  • delivery inclusive reservior for brake fluid
  • one piece will be needed
68,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 192

Pipe master brake cylinder - plastic reservoir (100mm)

Special rubber hose (brake fluid resistant) for connection brake fluid reservoir and brake master cylinder.
  • length: 100 mm
  • one piece will be needed
price 10,50 Euro per Meter
1,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 187

Pipe master brake cylinder - plastic reservoir (110mm)

Special rubber hose (brake fluid resistant) for connection brake fluid reservoir and brake master cylinder.
  • length: 110 mm
  • one piece will be needed
price 10,45 Euro per Meter
1,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 188

Tank for brake fluid 2 circle

Reservoir for brake fluid with two glands for Trabant 601 with 2-circle brake master cylinder, from vintage: april 1980.Fit also to Wartburg 353 and 1.3, Barkas B1000 with two circle brake master cylinder and Barkas B1000-1.
  • scope of delivery: inclusive cap, but without mounting parts
  • one piece will be needed
15,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6142

Tank for brake fluid 1 circle

Reservoir for brake fluid for Trabant 601 with single-circle brake master cylinder, up to vintage: april 1980 and many trailer and camper with hydraulical brake system
  • scope of delivery: inclusive cap
  • one piece will be needed
9,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 191

Cap for brake fluid reservoir

Special plastic cap for brake fluid tank.
Fit to all reservoirs of the 1- or 2-circle brake master cylinder.
Best quality, made in Germany
  • delivery inclusice rubber sealing
  • material: brake fluid resistent plastic
  • colour: black
  • one piece will be needed
6,65 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6139

Holder for brake fluid reservoir

Retaining strap for brake fluid tank, fit to 2-circle brake master cylinder.
  • delivery as single part, without any mounting bits
  • material: steel
  • surface: galvanized
  • one piece will be needed
5,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7150

Rubber lining made in Germany for brake and clutch pedal-shaft

Rubber pad for the clutch and brake pedal.
New reproduction made in Germany in brilliant quality.
Fit to many IFA cars like Trabant, P70/F8, Wartburg 311, Multicar...
  • material: rubber, black
  • made in Germany
  • best quality
  • two pieces will be needed
12,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 184

Rubber lining EU for brake and clutch pedal-shaft

Rubber pad for the clutch and brake pedal.
  • material: rubber, black
  • made in EU
  • worse qulity
  • two pieces will be needed
3,95 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8013

release spring for pedal, late model

release spring fit to brake pedal and clutch pedal of pedal unit
length of the spring coil: 53mm
diameter of the spring coil: 10mm
total length of the spring: ca.122mm
  • fit to Trabant 601 and Trabant 1.1
  • two pieces will be needed
1,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6643

release spring for pedal, old model

release spring fit to brake pedal and clutch pedal of pedal unit
length of the spring coil: 69mm
diameter of the spring coil: 8mm
total length of the spring: ca.160mm
  • fit to Trabant 601
  • two pieces will be needed
1,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7372

Foot lever clutch

Foot lever for the mecanical actuated cluch system of the Trabant 601 and 1,1.
24,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7127

Foot lever unit ( overhauled )

Foot lever unit constist of one lever for the hydraulic actuated brake system and one lever for the mechanical actuated cluch system. The set is complete in Germany refreshed and pre-installed.
110,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 185

Mounting bolt for foot lever unit

Mounting screw for foot lever unit.
  • fit to Trabant 601 and Trabant 1,1
  • scope of delivery inclusive 1x bolt, 1x Washer, 1x spring washer
  • 4 pieces will be needed
1,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8522

Screw-cap for brakeline 4,75x0,7 Trabant

Screw-cap for breakline 4,75mm x 0,7mm
fit to Trabant 500, 600, 601 and Trabant 1,1
0,82 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 264
The complete offer in 1 and 2-circle brake master cylinder

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas