fuel system

Copper tube to use as fuel pipe to connect the fuel pump and the fuel tank. (return flow line)

• material: copper tube
• size: 6x1
• length: 5 meter
• one piece will be needed

Fuel line 6 x 1 mm, most vehicles used as rear flow pipe for the petrol pump.
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized

outer diameter:	6 mm
inner diameter:	4 mm
wall thickness:	1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.

Fuel line 6 x 1 mm, most vehicles used as rear flow pipe for the petrol pump.
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized

outer diameter:	6 mm
inner diameter:	4 mm
wall thickness:	1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.

reinforcement bushing for our polyamide fuel pipe 8 x 1 (Art.No.: 7513 and 7514)
material: brass

It should be uesed for every connection between polyamid fuel pipe and fuel hose!
mor informations: see details

Copper tube to use as fuel pipe to connect the fuel tank and the fuel pump. (suction line)

• material: copper tube
• size: 8x1
• length: 5 meter
• one piece will be needed

Fuel line 8 x 1 mm
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized

outer diameter:	8 mm
inner diameter:	6 mm
wall thickness:	1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.

Fuel line 8 x 1 mm
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized

outer diameter:	8 mm
inner diameter:	6 mm
wall thickness:	1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.

reinforcement bushing for our polyamide fuel pipe 8 x 1 (Art.No.: 6032 and 6033)
material: brass

It should be uesed for every connection between polyamid fuel pipe and fuel hose!
mor informations: see details