Single parts BVF carburettor
|
Special made fiber sealing as single part for sealing the brass air adjustment slide jet to the carburettor and the cover of the main jet.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettor types: BVF 40F 2-11 of the car Wartburg 353 and carburettor types: BVF 40F 2-11 of the car Barkas B1000.
size:
- inside diameter: 8,2mm
- outside diameter: 11mm
- thickness: 1,0mm
- two pieces will be needed
|
1,85 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 8300 |
|
New produced Nozzle, made in Germany !
Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
- Jet size: 75
- Jet thread: M5
- delivery as single part
|
5,62 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 8407 |
|
Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
- Jet size: 80
- Jet thread: M5
- delivery as single part
|
3,75 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 8408 |
|
Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
- Jet size: 85
- Jet thread: M5
- delivery as single part
|
3,75 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 8409 |
|
Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
- Jet size: 90
- Jet thread: M5
- delivery as single part
|
3,75 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 8410 |
|
Screw for fix the butterfly valve at the throttle shaft.
Fit for the Berlin carburettor BVF 40F.
Please note: this screw have to be mounted properly, use Threadlocking - medium strength (Art.-Nr.:6380).
Lose screws can cause worse engine damages!
- Raised countersunk-head screw
- delivery as single part
- total: 2 pieces will be needed
|
0,55 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 8411 |
|
Nut and secure washer for fix the tappet of the accelerating pump.
Fit for the Berlin carburettor BVF 40F.
For dismounting and mounting is it necessitating to split the carurettor case.
Exact mounting place: please click on Detail
- scope of delivery: 1x nut and 1x spring washer
- total: one pieces will be needed
|
0,25 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 8442 |
Sealings two level carburettor
Fuel sensor and spare parts
|
Sensor for fuel gauge with potentiometer for connection to all offert fuel gauges.
Mounting place: on top / inside of the fuel tank.
Complete with rubber sealing and float. Fit to Wartburg 353 and Wartburg 1,3.
- additional switch for reserve control lamp (GR)
- made in Germany
- one piece will be needed
|
57,43 €inclusive VAT, plus shipping costs  temporary not available
Art.No. 6690 |
|
Plastic float for the sensor of the fuel gauge as an single part.
Fit to all vehicle models: Trabant 601, Trabant 1.1, Wartburg 353, Wartburg 1.3, Brakas B1000, Barkas B1000-1, Multicar.
- material: fuel resistant plastic, colour: withe
- made in Germany
- one piece will be needed
|
25,90 €inclusive VAT, plus shipping costs temporary not available
Art.No. 7460 |
Fuel pump and mounting parts
|
fuel pump spare kit constist of:
1 x membran; 1 x pressure spring, 2 x valves, 1 x strainer, 2 x seal,
1 sealing ring (rubber)
fit for all fuel pumps Wartburg 353 and B1000 |
24,45 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 3142 |
|
insulation plate for flange of fuel pump
This insulation plate reduced the factor of heat from engine block to the fuel pump. It protects from blowholes when the fuel evaporates because of to much heat.
- one piece will be needed for each fuel pump
- it will mounted between two flange rubber seals
- made of plastic
- fit for all fuel pumps Wartburg 353 and B1000
|
8,55 €inclusive VAT, plus shipping costs temporary not available
Art.No. 6766 |
Fuel pipes metal / plastic
|
Fuel line 6 x 1 mm, most vehicles used as rear flow pipe for the petrol pump.
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
| outer diameter: | 6 mm | | inner diameter: | 4 mm | | wall thickness: | 1 mm |
price is for one meter (max. 20 meter in one piece)
special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary. |
| Bitte beachten: abgelängte Ware auf Kundenwunsch, keine Rücknahme oder Umtausch! |
4,50 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 7513 |
|
Fuel line 6 x 1 mm, most vehicles used as rear flow pipe for the petrol pump.
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
| outer diameter: | 6 mm | | inner diameter: | 4 mm | | wall thickness: | 1 mm |
price is for one meter (max. 20 meter in one piece)
special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary. |
| price per meter: 3,20 Euro |
16,00 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 7514 |
|
reinforcement bushing for our polyamide fuel pipe 8 x 1 (Art.No.: 7513 and 7514)
material: brass
It should be uesed for every connection between polyamid fuel pipe and fuel hose!
mor informations: see details |
0,27 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 7515 |
|
Fuel line 8 x 1 mm
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
| outer diameter: | 8 mm | | inner diameter: | 6 mm | | wall thickness: | 1 mm |
price is for one meter (max. 20 meter in one piece)
special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary. |
| price 4,80 Euro / meter |
4,80 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 6033 |
|
Fuel line 8 x 1 mm
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
| outer diameter: | 8 mm | | inner diameter: | 6 mm | | wall thickness: | 1 mm |
price is for one meter (max. 20 meter in one piece)
special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary. |
| price per meter: 3,80 Euro |
19,00 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 6032 |
|
reinforcement bushing for our polyamide fuel pipe 8 x 1 (Art.No.: 6032 and 6033)
material: brass
It should be uesed for every connection between polyamid fuel pipe and fuel hose!
mor informations: see details |
0,27 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 6305 |
Texture-fuel hose 6mm and clamps
|
Flexible fuel hose with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
- inside diameter: 5,5mm
- material: petrol resistant rubber with outside texture
- made in Germany
|
| priece per Meter: 5,14 Euro |
5,14 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 728 |
Texture fuel hose 8mm and clamps
|
Flexible fuel hose with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
- inside diameter: 8 mm
- material: petrol resistant rubber with outside texture
- made in Germany
|
| priece per Meter: 6,22 Euro |
6,22 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 729 |
Rubber fuel hose 6mm and clamps
|
Flexible fuel hose with inside texture and rubber surface.
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
- inside diameter: 5,5 mm
- material: petrol resistant rubber with inside texture
- made in Germany
|
| priece per meter: 4,93 Euro |
4,93 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 7113 |
|
Clamp fpr flexible fuel hose (6mm inside diameter).
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
- max.diameter: 12 mm
- wide: 8,5mm
- re-usable
|
1,05 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 8161 |
Rubber fuel hose 7,5mm and clamps
|
Flexible fuel hose with inside texture and rubber surface. Inside diameter 7,5mm.
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
- inside diameter: 7,5 mm
- material: petrol resistant rubber with inside texture
- made in Germany
|
| price per meter: 5,10 Euro |
5,10 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 6308 |
|
Clamp fpr flexible fuel hose (8mm inside diameter).
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
- max.diameter: 14 mm
- wide: 8,5mm
- re-usable
|
1,05 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 8164 |
Two stroke oel mineralic and half syntetic
Two stroke oel full syntetic
|
full synthetic oil
best quality of 2-stroke oil
content: 1L
- reduce carbon deposits
- suitable for premix and autolube injection systems
- clean burning
- minimise smoke
- extend engine component life
- also for sport-engines
- for mixing ratio: 1:50 1:33 1:25 (2%-4%)
Additional comment: Notes for used oil disposal |
12,74 €inclusive VAT, plus shipping costs temporary not available
Art.No. 6390 |
Hoses for the fuel tank
Kit of screw (plug) for the Wartburg petrol tank.
The special screw is made of stainless steel.
Fit to all kind of Wartburg Wartburg 311, 312, 313 Limousine, Cabrio, Camping, Coupe as well to Wartburg353 and 1,3 Limousine, Tourist and Trans.
- made in Germany
- Scope of delivery: 1x special fuel tank plug, 2x sealings (copper), 1x small drain plug (stainless steel)
- one set will be needed
|
17,10 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 8518 |
Screw for the Wartburg petrol tank, special made of stainless steel.
Fit to all kind of Wartburg Wartburg 311, 312, 313 Limousine, Cabrio, Camping, Coupe as well to Wartburg353 and 1,3 Limousine, Tourist and Trans.
- material: stainless steel
- made in Germany
- Delivery without sealings and without the small drain plug
- one piece will be needed
|
15,15 €inclusive VAT, plus shipping costs Delivery in 1-3 days
Art.No. 8517 |
