This site in german: Wartburg 353 > Ersatzteile > Bremsen 
You are here: > Wartburg 353> Spare parts> Brakes

Spare parts for brake system Wartburg 353

Category Spare parts for brake system Wartburg 353 has the following subcategorys:

The product category Wartburg 353 > Spare parts > Brakes is spread over 4 sites:

In dieser Warengruppen finden Sie Einzelersatzteile und Baugruppen für die Bremsanlage des Wartburg 353.
Der Wartburg wurde Anfangs mit Duplex Trommelbremse an der Vorderachse gebaut.
Diese Art der Bremsanlage ist auf Grund der höheren Anzahl an mechachnischen sowie hydraulichen Bauteilen

Brake master cylinder, two circle, original

Complete in Germany overhauled brake master cylinder.
Type: IFA BHL ZE 32R
The 2-circle brake master cylinder was mounted at the Wartburg 353 and 1,3
it is a brake system with two separate brake circle. One supply the front wheel brakes and one the rear wheel brake cylinders.
The connection for the both front brake tube line is in driving direction at the front end of the brake master cylinder. The main tube line for the rear brake circle will be connected between the connections for the tank for brake fluid 2 circle.
  • complete mounted
  • one piece will be needed

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA BHL ZE 32R to our company.
90,13 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7220

Brake master cylinder, 1 circle

Complete overhauled brake master cylinder, 1 circle for Warburg 312,313,353 (old type with brake drum system front and rear axle)
piston diameter: 22,2mm

Details about the exchange parts:
The brake master cylinder we can only deliver in direct exchange for the old one, to enable the overhauling.
The old (worned out master cylinder IFA BHL) have to ship to our company in advance. After checking the delivered parts for the possibility of overhauling we will send you the prepaid invoice.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
128,17 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7097

Brake master cylinder, 2 circle

fit to all Wartburg variant with 2-circle brake master cylinder.
  • made in EU
114,80 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3091

Cap for stop-lamp oil-pressure switch

Rubber cap for the brake ligths switch. Best protection for dust and wather.
  • Fit to the vehicles: Trabant 500, 600, 601, 1.1 Wartburg 311, 312, 313, 353, 1.3 Barkas B1000,B1000-1 Framo, Mulicar M22, M24, M26
7,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7308

Stop-lamp oil-pressure switch pin plug

Hydraulic pessure cennected switch for the brake lights.
Type of the switch with flat plug contacts.
  • connection pins for standard pins 4,8mm
  • high quality EU production
  • Fit to the vehicles: Trabant 500, 600, 601, 1.1 Wartburg 311, 312, 313, 353, 1.3 Barkas B1000,B1000-1 Framo, Mulicar M22, M24, M26
  • one piece will be needed
11,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 102

Stop-lamp oil-pressure switch srew connection

Hydraulic pessure cennected switch for the brake lights.
Type of the switch with srew contacts.
  • delivery as original spare part
  • Fit to the vehicles: Trabant 500, 600, 601, 1.1 Wartburg 311, 312, 313, 353, 1.3 Barkas B1000,B1000-1 Framo, Mulicar M22, M24, M26
11,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7595
Self repair sets Wartburg master cylinder

Sleeve set dual brake master cylinder, complete

Sleeve set for dual brake master cylinder consist of:
  • 2x annular boot for piston A-circular
  • 2x annular boot for piston B-circular
  • made in EU
8,49 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3092

Repair set for 2-circle brake master cylinder *original*

Sleeve set for dual brake master cylinder type: IFA BHL, ZE32R consist of:
  • 2x annular boot for piston A-circular
  • 2x annular boot for piston B-circular
  • 2x ventil
  • material: spezial rubber
  • all parts made in Germany by the original manufacture
  • one set will be needed

Fit for the tandem brake cylinder typ: IFA BHL, ZE32R for Wartburg 353 and 1,3.
19,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7185

Sleeve set for brake master cylinder 22,2mm

Sleeve set for brake master cylinder of one-circuit brake system
piston diamater: 22,2mm
Case mark: Renak CH 107
consist of:
  • 1x annular boot for piston
  • 1x rubber cup sleeve
  • 1x rubber valve sleeve

fit to Wartburg 353 and Barkas B1000 (2-stroke)
19,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6453

Protection bellows for pressure bar input brake master cylinder

4,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3093
The product category Wartburg 353 > Spare parts > Brakes is spread over 4 sites:
1234
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Bongs im Headshop | Spielzeug-Truhe.de - Holzspielzeug