This site in german: Wartburg 353 > Ersatzteile > Bremsen 
You are here: > Wartburg 353> Spare parts> Brakes

Spare parts for brake system Wartburg 353

Category Spare parts for brake system Wartburg 353 has the following subcategorys:

The complete offer in Spare parts for brake system Wartburg 353

Brake master cylinder, two circle, original

Complete in Germany overhauled brake master cylinder.
Type: IFA BHL ZE 32R
The 2-circle brake master cylinder was mounted at the Wartburg 353 and 1,3
it is a brake system with two separate brake circle. One supply the front wheel brakes and one the rear wheel brake cylinders.
The connection for the both front brake tube line is in driving direction at the front end of the brake master cylinder. The main tube line for the rear brake circle will be connected between the connections for the tank for brake fluid 2 circle.
  • complete mounted
  • one piece will be needed

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA BHL ZE 32R to our company.
138,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7220

Brake master cylinder, 1 circle

Complete overhauled brake master cylinder, 1 circle for Warburg 312,313,353 (old type with brake drum system front and rear axle)
piston diameter: 22,2mm

Details about the exchange parts:
The brake master cylinder we can only deliver in direct exchange for the old one, to enable the overhauling.
The old (worned out master cylinder IFA BHL) have to ship to our company in advance. After checking the delivered parts for the possibility of overhauling we will send you the prepaid invoice.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
128,17 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7097

Brake master cylinder, 2 circle

fit to all Wartburg variant with 2-circle brake master cylinder.
  • made in EU
114,80 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3091

Cap for stop-lamp oil-pressure switch

Rubber cap for the brake ligths switch. Best protection for dust and wather.
  • Fit to the vehicles: Trabant 500, 600, 601, 1.1 Wartburg 311, 312, 313, 353, 1.3 Barkas B1000,B1000-1 Framo, Mulicar M22, M24, M26
7,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7308

Stop-lamp oil-pressure switch pin plug

Hydraulic pessure cennected switch for the brake lights.
Type of the switch with flat plug contacts.
  • connection pins for standard pins 4,8mm
  • high quality EU production
  • Fit to the vehicles: Trabant 500, 600, 601, 1.1 Wartburg 311, 312, 313, 353, 1.3 Barkas B1000,B1000-1 Framo, Mulicar M22, M24, M26
  • one piece will be needed
11,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 102

Stop-lamp oil-pressure switch srew connection

Hydraulic pessure cennected switch for the brake lights.
Type of the switch with srew contacts.
  • delivery as original spare part
  • Fit to the vehicles: Trabant 500, 600, 601, 1.1 Wartburg 311, 312, 313, 353, 1.3 Barkas B1000,B1000-1 Framo, Mulicar M22, M24, M26
11,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7595
Self repair sets Wartburg master cylinder

Sleeve set dual brake master cylinder, complete

Sleeve set for dual brake master cylinder consist of:
  • 2x annular boot for piston A-circular
  • 2x annular boot for piston B-circular
  • made in EU
8,49 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3092

Repair set for 2-circle brake master cylinder *original*

Sleeve set for dual brake master cylinder type: IFA BHL, ZE32R consist of:
  • 2x annular boot for piston A-circular
  • 2x annular boot for piston B-circular
  • 2x ventil
  • material: spezial rubber
  • all parts made in Germany by the original manufacture
  • one set will be needed

Fit for the tandem brake cylinder typ: IFA BHL, ZE32R for Wartburg 353 and 1,3.
19,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7185

Sleeve set for brake master cylinder 22,2mm

Sleeve set for brake master cylinder of one-circuit brake system
piston diamater: 22,2mm
Case mark: Renak CH 107
consist of:
  • 1x annular boot for piston
  • 1x rubber cup sleeve
  • 1x rubber valve sleeve

fit to Wartburg 353 and Barkas B1000 (2-stroke)
19,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6453

Protection bellows for pressure bar input brake master cylinder

4,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3093

connection hose brake master cylinder - brake fluid reservoir

Brake fluid resistant connection hose between brake master cylinder and fluid tank.
  • Wartburg 353 from vintage 6-85
  • Length: 300mm
  • two pieces will be needed
Price: 10,50 Euro / Meter
3,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6400

Connection hose brake master cylinder - brake fluid reservoir

Brake fluid resistant connection hose between brake master cylinder and fluid tank.
  • Wartburg 353 up to vintage 6-85
  • Length: 410mm
  • one piece will be needed
Price: 10,49 Euro / Meter
4,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6399

Connection hose brake master cylinder - brake fluid reservoir

Brake fluid resistant connection hose between brake master cylinder and fluid tank.
  • Wartburg 353 from vintage 6-85
  • Length: 350mm
  • one piece will be needed
Price: 10,51 Euro / Meter
3,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6401

Clamp for connection hose brake master cylinder - brake fluid reservoir

Clamp for mounting at the barke fluid connection hose between brake master cylinder and fluid tank.
  • Delivery as single part
  • material: stainless steel
  • 4 pieces will be needed
1,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8589

brake fluid, DOT4, 0,25 litre

for use in Trabant, Wartburg, B1000, trailer and camper with hydraulical brake system and a lot of other car types
  • volume: 250 ml

Additional comment: Notes for used oil disposalLink opens in a new window.
price per liter: 20,16 Euro
5,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6200

brake fluid, DOT4, 0,5 litre

for use in Trabant, Wartburg, B1000, trailer and camper with hydraulical brake system and other cars
  • volume: 500 ml

Additional comment: Notes for used oil disposalLink opens in a new window.
price per Liter: 13,18 Euro
6,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6201

brake fluid, DOT4, 1,0 litre

for use in Trabant, Wartburg, B1000 and other cars
  • volume: 1,0 l
  • norms: FMVSS Nr.116 DOT4 und DOT3, SAEJ1703, DIN/ISO 4925

Additional comment: Notes for used oil disposalLink opens in a new window.
price per Liter: 11,22 Euro
11,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6202

Bleeder screw cap

fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
  • material: rubber
  • made in Germany
0,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 215

Universal brake line, CUNIFER 5m, 4,75x0,7

Brakepipeline made of NiCuFe material. Size 4,75 x 0,7 mm with length of 5m
Fit for many cars also for Trabant, Wartburg
priece 5,45 Euro / meter
37,01 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6177

Universal brake line made of steel, PVC-coated 5m, 4,75x0,7

Brakepipeline made of steel and plastic coated.
One set constists of 6mm x 0,7mm 5m long
for Trabant, Wartburg, Volkswagen
price 3,05 Euro / meter
15,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 262

Universal brake line, PVC-coated in 1 m pices max.5m, 6x0,7

Brakepipeline made of steel and plastic coated.
Dimensions: 6mm x 0,7mm maximum 5m long.
Fit to Trabant, Wartburg, Volkswagen.
Price per meter.
Price: 6,50 Euro / Meter
6,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 263

Screw-cap for brakeline 4,75x0,7 Wartburg and VW

Brake pipe screw for breakline with flanged type E.
Can be used for all brake lines made of steel or nickel-cooper alloy with outside diameter 4,75mm.
  • fit to Wartburg 353, Wartburg 1,3 and Opel (Vauxhall)
  • thread: M10x1,0
  • spanner gap: M10
  • useable for brake pipes: 4,75x0,7mm
0,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6378

Brake hose retainer, original style

sacer spring for connection between flexible brake hose and brake pipe
  • surface bronzing
  • one piece for each screw joint will be needed
1,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 240

Brake hose retainer

sacer spring for connection between flexible brake hose and brake pipe
not the same design like the originale one (made for VW). This retainer can be also used for Trabant and Wartburg.
  • electrogalvanized, black
  • high quality made in Germany, spring metal
  • one piece for each screw joint will be needed
1,24 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6624

Tank for brake fluid 2 circle

Reservoir for brake fluid with two glands for Trabant 601 with 2-circle brake master cylinder, from vintage: april 1980.Fit also to Wartburg 353 and 1.3, Barkas B1000 with two circle brake master cylinder and Barkas B1000-1.
  • scope of delivery: inclusive cap, but without mounting parts
  • one piece will be needed
20,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6142

Brake pipe spanner 10-11mm angled

Special tool for mounting or demounting of screw-cap for brakelines.
type: level angleded
Fit to brake screws SW10 and SW11.
12,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7702

Brake pipe spanner 12-13mm, straight

Special tool for mounting or demounting of screw-cap for brakelines.
type: sraight
Fit to brake screws SW12 and SW13.
12,43 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7992

Brake pipe spanner 10-11mm, straight

Special tool for mounting or demounting of screw-cap for brakelines.
type: sraight
Fit to brake screws SW10 and SW11.
9,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7703

Brake-cleaner XXL 850ml

quick-cleaner for brake and clutch parts
  • FCKW, aceton free
  • volume: 850 ml
  • delivery as an single spray
price 5,29 Euro / liter
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7898

brake-cleaner 600ml

quick-cleaner for brake and clutch parts
  • FCKW free
  • volume: 600 ml
  • type: AD
  • delivery as an single spray
price 7,62 Euro / liter
4,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6252

Brake-cleaner, one packing unit, 12x Sprayer 600ml

Complete packing unit quick-cleaner for brake and clutch parts
  • FCKW free
  • content: 12x sprayer with volume of 600 ml
That implies a price of a single sprayer of 3,90 €price 6,50 Euro / liter
46,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7033

Rubber cover for pedal

Rubber cover fit to brake pedal and clutch pedal
Fit to Wartburg 353 and Wartburg 1.3, too.
  • for each pedal fou will need one piece
  • material: soft rubber
  • colour: black
Part-No. 53 01403 906
3,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7021

Holder single part steel

Spring bearing for the brake shoe holder can be used for Trabant 500- 601 front brake, Wartburg 353 and Wartburg 1,3.
  • material: steel
  • priece for each piece
  • two pieces will be needed for each brake shoe
  • delivery as an single part
3,83 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7098

Spring for brake pedal

Release spring for the pedal system at the Wartburg 353 and Wartburg 1,3.
Will be mounted on one hand at the brake pedal and on the other side at the car body.
The spring supports the pedal reset of the brake pedal.
  • material: steel
  • surface: galvaniced
  • one piece will be needed
  • delivery as an single part
  • best replacement and high quality, made in Germany
4,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8208

Bleeder screw cap with tongue

Rubber cap with additional tongue fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
The flap kibosh loosing the complete cap.
  • material: brake fluid resistant rubber
  • made in EU
1,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8446
The complete offer in Spare parts for brake system Wartburg 353

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas