This site in german: Wartburg 353 > Ersatzteile > Kraftstoffsystem 
You are here: > Wartburg 353> Spare parts> fuel system

fuel system

The product category Wartburg 353 > Spare parts > fuel system is spread over 11 sites:

Single parts BVF carburettor

Seal for carburettor case 40 F, made in Germany

Sealing for the both housings (float case) of old type of carburettor type BVF 40F.
This sealing is made in Germany of special fuel resistant sealing paper. The holes and sizes are exactly and conforms to the original spare part.
Fit to the Berliner carburettors for Wartburg 353 (40F 2-11) and Barkas B1000 40F 1-12.
8,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7799

Seal for carburettor case (old type) 40 F

Simple paper sealing with small divergences at the accuracy of fit.
Cheaper product, made in Europe.
seal for housing of old type of carburettor of Wartburg 353 and B1000, called 40-F
2,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6478

float gauge for carburettor (old type) 40 F

carburettor float gauge for old type of carburettor of Wartburg 353, B1000 and Robur (LO) called 40 F
Reproduction made in EU
29,56 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6517

Pin for float gauge carburettor 40 F

Steel pin for the carburettor float gauge.
Fit for BVF carburettors type 40F of Wartburg 353, B1000 and Robur (LO).
  • delivery as single part
  • made in Germany
  • one piece will be needed
2,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8582

Carburettor idler air jet BVF 40F (M6-150)

Nozzle as idling air jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet inside of the Carburettor case. For dismounting and mounting is it necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • Jet size: 150
  • Jet thread: M6
  • delivery as single part
4,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8405

Carburettor main jet BVF 40F (M5-125)

Nozzle as main jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet inside of the Carburettor case (float chamber). For dismounting and mounting is is necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • Jet size: 125
  • Jet thread: M5
  • delivery as single part
3,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8406

Carburettor idler jet BVF 40F (M5-75)

New produced Nozzle, made in Germany !
Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 75
  • Jet thread: M5
  • delivery as single part
5,62 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8407

Carburettor idler jet BVF 40F (M5-80)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 80
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8408

Carburettor idler jet BVF 40F (M5-85)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 85
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8409

Carburettor idler jet BVF 40F (M5-90)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 90
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8410

The product category Wartburg 353 > Spare parts > fuel system is spread over 11 sites:
1234567891011
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Pocket Bikes