This site in german: Trabant 601 > Ersatzteile > Bremsen > Bremse hinten 
You are here: > Trabant 601> Spare parts> Brakes> Rear brake

Rear brake parts

The product category Trabant 601 > Spare parts > Brakes > Rear brake is spread over 6 sites:

Sliding element, complete, rear brake

Rear brake sliding element Trabant 601.
Consist of 1 paar, complete set for one brake:
  • 2x sliding pin
  • 2x holder
  • 2x compressing spring
  • material: galvaniced metal
  • made in Germany
  • one piece will be needed for each front brake
15,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 316

Rear wheel-brake cylinder, original

Complete in Germany overhauled rear wheel brake cylinder with ring sleeves, brak-piston D=15,87mm.
Mark: RENAK BZ 105
Fit to Trabant 601 from 1.4.1968 onwards.
  • scope of delivery: inclusive ring sleeves and bleeder screw
  • break piston diameter: 15,87mm
  • also used for some IFA-vehicles, Camptourist tent trailer
  • two pieces will be needed

also for Camptourist tent trailer
Please note, we can only exchange you this spare part if you ship 1x wheel brake cylinder with the mark Renak BZ 105 to our company in advance!
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
78,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7191

Rear wheel-brake cylinder, 15mm, no name

Complete rear wheel brake cylinder with ring sleeves and brak-piston D=15,87mm.
Reproducition spare part as low budget product.
Fit to Trabant 601 from 1.4.1968 onwards.
  • scope of delivery: inclusive ring sleeves, without bleeder screw
  • break piston diameter: 15,87mm
  • also used for some IFA-vehicles, Camptourist tent trailer
  • two pieces will be needed

also for Camptourist tent trailer
16,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8212

Rear wheel-brake cylinder

complete rear wheel brake cylinder with ring sleeves, brak-piston D=15,87mm.
Fit to Trabant 601 from 1.4.1968 onwards.
  • scope of delivery: inclusive ring sleeves, without bleeder screw
  • break piston diameter: 15,87mm
  • also used for some IFA-vehicles, Camptourist tent trailer
  • made in EU
  • two pieces will be needed

also for Camptourist tent trailer
27,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6040

Rear wheel-brake cylinder, original 19mm

Complete in Germany overhauled rear wheel brake cylinder with ring sleeves, brak-piston D=19,04mm.
Fit to Trabant 601 up to 03.1968 and Trabant 1,1 all models.
  • scope of delivery: inclusive ring sleeves and bleeder screw
  • break piston diameter: 19,04mm
  • also used for some IFA-vehicles, Camptourist tent trailer
  • two pieces will be needed
55,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7462

Rear wheel-brake cylinder, 19,05mm

Brake cylinder for the rear wheel brake sytem of the Trabant 500, 600 and 601 (with vintage definition)
Reproduction with high quality.
  • made in Italy
  • complete pre-assembled with rubber sealings
  • bore diameter 19,05 mm
  • fit to Trabant up to vintage 31.3.1968
  • fit to the rear axle left and right hand
  • fit also for the camper Qek
  • delivery without bleeder screw
  • two pieces will be needed

additional needed bits, not part of this offer. Please order separately:
2x LDM-part.no.:7532 mounting screw for wheel brake cylinder
LDM-part.no.:214 bleeder screw for wheel brake cylinder
LDM-part.Nr.:215 dust cap for bleeder screw

special tools for disassembly / assembly:
  • no special tools needed to install the wheel brake cylinder at the Trabant or Qek brake plate
28,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 212

Simplex wheel-brake cylinder rear, overhauled

Wheel brake cylinder (simplex) for the reart brake system of the Trabant 500.
Spare part is comlete overhauled. Please note, your old brake cylinder have to be shipped to us before we send you the spare part.
{L[complete with ring sleeves][brake pistion diameter 15,87mm][inclusive bleeder screw]
Please note, your old brake cylinder have to be shipped to us before we send you the spare part.
78,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7320

Mounting screw wheel brake cylinder, rear axle, Trabant

Hexagon bolt inclusive lock washer for mounting the rear brake cylinder at the drum brake base plate.
Fit to all kind of Trabant 500,600, 601 and 1.1 models.
  • surface: zinc galvaniced
  • grade: 10.9
  • scope of delivery inclusive lock washer
  • two pieces will be needed for each wheel brake cylinder
0,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7532

Rear brake hose, ATE

Rear short brake hose with female and male thread connection. Made by the german producer ATE.
Suitable for the rear brake of Trabant 601 all models (with coil or leaf spring) and some trailer types
  • high quality, made by ATE
  • thread: M10 x 1
  • length complete: 18 cm
  • two pieces will be needed
25,53 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8227

Rear brake hose

short brake hose with female and male thread connection
suitable for rear brake of Trabant 601 and some trailer types
  • thread: M10 x 1
  • length complete: 18 cm
  • two pieces will be needed
  • maed in Europe
8,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 231

The product category Trabant 601 > Spare parts > Brakes > Rear brake is spread over 6 sites:
123456
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Headshop