This site in german: Trabant 601 > Ersatzteile > Bremsen > Bremse hinten 
You are here: > Trabant 601> Spare parts> Brakes> Rear brake
Navigation

Rear brake parts

The complete offer in Rear brake parts

Rear brake shoe set ATE

The brake shoe rear set consist of an metal basic part and an lining.
This kit is made by ATE.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining and 2x rivet.
Lever for the hand brake cable are NOT included. It have to be installed you old ones.
Fit to Trabant 601 and Trabant 1,1.
Also fit to some trailers and campers like Qek and Camptourist / Klappfix with hydraulic brake system.
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each car
66,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8306

Rear brake shoe set (no name)

Low budget brake shoe kit consist of an metal basic part and an lining.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining, 2x rivet for mounting lever for the hand brake cable.
Fit to Trabant 601 and Trabant 1,1.
Also fit to some trailers and campers like Qek and Camptourist / Klappfix with hydraulic brake system.
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each car
50,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8353

Brake shoe long, single part, overhauled

Complete in Germany reclaimed brake shoe set for the rear brake.
Brake shoe complete with lining, fit to the Trabant 601 models Limousine, station wagon and Kübel, Qeck, Camptourist / Klappfix.
  • use for the rear brake system of Trabant 601
  • scope of delivery: one kit
  • lining length: 2x 210mm and 2x 160mm mm
  • lining thickness: 4 mm
  • width: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed
  • delivery only in exchange after you send original IFA brake shoes to our company in advance
Exchenge part: You have to ship one set of original brake shoes to our company in advance !
74,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8403

Rear brake shoe set complete

The brake shoe rear set consist of an metal basic part and an lining.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining inclusive mounted lever for the hand brake cable.
Fit to Trabant 601 and Trabant 1,1.
Also fit to some trailers and campers like Qek and Camptourist / Klappfix with hydraulic brake system.
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each car
56,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 312

Rivet bolt for hand-brake lever

Rivet bolt for mounting the hand brake lever at the rear brake shoe (short lining).
Fit to Tarabant 601 and Trabant 1,1 rear axle, Wartburg 311,312,353,1.3 and Anhänger wie Qek, Intercamp, Oase, Camptorist, Klappfix.
  • material: steel, galvaniced
  • one piece for each rear brake
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 183

Pressure web, left hand - rear wheel brake

The pressure web is fixed between the two rear wheel brake shoes to transmit the power of the mechanical handbrake to both of the brake shoes.
  • material: metal, galvaniced
  • place: rear wheel brake, left hand
  • original spare part
  • fit to Trabant 601 and Trabant 1,1
  • one piece will be needed
15,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 306

Pressure web, right hand - rear wheel brake

The pressure web is fixed between the two rear wheel brake shoes to transmit the power of the mechanical handbrake to both of the brake shoes.
  • material: metal, galvaniced
  • place: rear wheel brake, right hand
  • original spare part
  • fit to Trabant 601 and Trabant 1,1
  • one piece will be needed
15,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 307

Retainer clip for release spring

Retainer for the release spring for push piece between the rear brake shoes.
Fit for all Trabant 500, 600, 601 and 1.1
Fit the the left and right rear brake.
  • Material: spring clip
  • Reproduction
  • 2 pieces will be needed
3,37 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8561

Upper release spring ( long )

Spring for brake shoes front and rear axle.
  • length: 132 mm
  • diameter: 10 mm
  • galvaniced
  • made in EU
  • 6 pieces will be needed for each car
  • made in Germany
2,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 314

Lower release spring ( short )

spring for brake shoes front and rear axle
  • length: 67 mm
  • diameter: 10 mm
  • made in EU
  • 1 piece will be needed for each rear wheel brake side
2,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 313

Sliding element, complete, rear brake

Rear brake sliding element Trabant 601.
Consist of 1 paar, complete set for one brake:
  • 2x sliding pin
  • 2x holder
  • 2x compressing spring
  • material: galvaniced metal
  • made in Germany
  • one piece will be needed for each front brake
15,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 316

Rear wheel-brake cylinder, original

Complete in Germany overhauled rear wheel brake cylinder with ring sleeves, brak-piston D=15,87mm.
Mark: RENAK BZ 105
Fit to Trabant 601 from 1.4.1968 onwards.
  • scope of delivery: inclusive ring sleeves and bleeder screw
  • break piston diameter: 15,87mm
  • also used for some IFA-vehicles, Camptourist tent trailer
  • two pieces will be needed

also for Camptourist tent trailer
Please note, we can only exchange you this spare part if you ship 1x wheel brake cylinder with the mark Renak BZ 105 to our company in advance!
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
78,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7191

Rear wheel-brake cylinder, 15mm, no name

Complete rear wheel brake cylinder with ring sleeves and brak-piston D=15,87mm.
Reproducition spare part as low budget product.
Fit to Trabant 601 from 1.4.1968 onwards.
  • scope of delivery: inclusive ring sleeves, without bleeder screw
  • break piston diameter: 15,87mm
  • also used for some IFA-vehicles, Camptourist tent trailer
  • two pieces will be needed

also for Camptourist tent trailer
21,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8212

Rear wheel-brake cylinder

complete rear wheel brake cylinder with ring sleeves, brak-piston D=15,87mm.
Fit to Trabant 601 from 1.4.1968 onwards.
  • scope of delivery: inclusive ring sleeves, without bleeder screw
  • break piston diameter: 15,87mm
  • also used for some IFA-vehicles, Camptourist tent trailer
  • made in EU
  • two pieces will be needed

also for Camptourist tent trailer
27,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6040

Rear wheel-brake cylinder, original 19mm

Complete in Germany overhauled rear wheel brake cylinder with ring sleeves, brak-piston D=19,04mm.
Fit to Trabant 601 up to 03.1968 and Trabant 1,1 all models.
  • scope of delivery: inclusive ring sleeves and bleeder screw
  • break piston diameter: 19,04mm
  • also used for some IFA-vehicles, Camptourist tent trailer
  • two pieces will be needed
55,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7462

Rear wheel-brake cylinder, 19,05mm

Brake cylinder for the rear wheel brake sytem of the Trabant 500, 600 and 601 (with vintage definition)
Reproduction with high quality.
  • made in Italy
  • complete pre-assembled with rubber sealings
  • bore diameter 19,05 mm
  • fit to Trabant up to vintage 31.3.1968
  • fit to the rear axle left and right hand
  • fit also for the camper Qek
  • delivery without bleeder screw
  • two pieces will be needed

additional needed bits, not part of this offer. Please order separately:
2x LDM-part.no.:7532 mounting screw for wheel brake cylinder
LDM-part.no.:214 bleeder screw for wheel brake cylinder
LDM-part.Nr.:215 dust cap for bleeder screw

special tools for disassembly / assembly:
  • no special tools needed to install the wheel brake cylinder at the Trabant or Qek brake plate
28,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 212

Simplex wheel-brake cylinder rear, overhauled

Wheel brake cylinder (simplex) for the reart brake system of the Trabant 500.
Spare part is comlete overhauled. Please note, your old brake cylinder have to be shipped to us before we send you the spare part.
{L[complete with ring sleeves][brake pistion diameter 15,87mm][inclusive bleeder screw]
Please note, your old brake cylinder have to be shipped to us before we send you the spare part.
78,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7320

Mounting screw wheel brake cylinder, rear axle, Trabant

Hexagon bolt inclusive lock washer for mounting the rear brake cylinder at the drum brake base plate.
Fit to all kind of Trabant 500,600, 601 and 1.1 models.
  • surface: zinc galvaniced
  • grade: 10.9
  • scope of delivery inclusive lock washer
  • two pieces will be needed for each wheel brake cylinder
0,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7532

Rear brake hose, ATE

Rear short brake hose with female and male thread connection. Made by the german producer ATE.
Suitable for the rear brake of Trabant 601 all models (with coil or leaf spring) and some trailer types
  • high quality, made by ATE
  • thread: M10 x 1
  • length complete: 18 cm
  • two pieces will be needed
25,53 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8227

Rear brake hose

short brake hose with female and male thread connection
suitable for rear brake of Trabant 601 and some trailer types
  • thread: M10 x 1
  • length complete: 18 cm
  • two pieces will be needed
  • maed in Europe
8,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 231

Brake drum ( single part ), slotted

The brake drum fit to the front and to the rear axle of Trabant 500, 600 and 601 (all 2-stroke typs).
Also useable for QEK-camper
  • circle of wheel bolts: 4 x 160 mm
  • diameter: 200 mm
  • made in EU
  • one piecewill be needed for each wheel
59,66 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 304

Brake drum set, slotted

The brake drum kit consist of two slotted brake drums.
Fit to the front and to the rear axle of Trabant 500, 600 and 601 (all 2-stroke typs).
Also useable for QEK-camper
  • circle of wheel bolts: 4 x 160 mm
  • diameter: 200 mm
  • made in EU
  • one set will be needed for each axle
price 44,11 Euro / piece
88,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7621

countersunk-head screw for brake drum

screw for brake drum Trabant
  • M6 x 10 mm
  • with hexagon socket
  • galvanized
  • one piece for each brake drum
0,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6214

Ring sleeve, Ø 15,87 mm, rear , EU ( incl. 2 pieces )

ring sleeve for rear brake cylinders (Art.No. 6040)
  • made in EU

contents:
The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.
7,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 217

Ring sleeve, Ø 15,87 mm, rear. original

Sleeve set fit to rear brake cylinders (Art.No. 7191)
contents:
  • 2x ring sleeve
  • 2x plug (rubber guide for brake shoe)
  • set can be uesed for one brake cylinder
  • made in Germany

The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.
15,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7307

Ring sleeve, Ø 19,05 mm, rear ( incl. 2 pieces )

Ring sleeve for wheel brake cylinder D=19,05mm
2 pieces in one set.
Fit to Trabant 500,600 und 601 up to 31.3.1968 and all Trabant 1.1
The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder part no.: 212 should be changed.
12,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 223

Dust cup sleeves rear wheel brake cylinder Simplex, Trabant 500, 600

Rubber sleeve as dust cap for repairing of the wheel brake cylinder type: Simplex.
Can be mounted at the fornt and rear axle.
  • fit to Trabant 500 and Trabant 600
  • delivery as an single part
  • two pieces will be needed for one brake cylinder (8 pieces for the complete Trabant)
7,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7741

Set of cup sleeves front wheel brake cylinder Simplex, Trabant 500 / 600

Cup sleeve for wheel brake cylinder D=22,2mm front axle.
  • high quality reproduction
  • made in Germany (original manufactur)
  • 2 pieces in one set
  • fit to Trabant 500 / 600

The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder Simplex (part.No. 7052) should be changed.
14,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7854

Set of cup sleeves rear wheel brake cylinder Simplex, Trabant 500 / 600

Cup sleeve for wheel brake cylinder D=15,87mm
  • 2 pieces in one set
  • fit to Trabant 500 / 600

The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder (Art.No. 7320) should be changed.
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6992

Bleeder screw, rear - brake suddle front

Bleeder screw for rear wheel brake cylinder Rear wheel-brake cylinder piston = 19,05mm and Rear wheel-brake cylinder piston = 15,87mm Trabant 601, Trabant 1.1 and QEK-caravans.
The bleeder screw fit also to Brake suddle left hand and Brake suddle right hand Wartburg 353 and Wartburg 1,3.
3 pieces will be needed for each brake suddle.

thread: M8 X 1,25
2,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 214

Bleeder screw cap

fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
  • material: rubber
  • made in Germany
0,65 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 215

Brake cable, left-hand ( short )

Cable for the hand brake. Fit to Trabant 601 and Trabant 1,1 left hand (driver side)
made in Hungary, good quality, comperes to the original one.
36,31 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 180

Brake cable, right-hand ( long )

Cable for the hand brake. Fit to Trabant 601 and Trabant 1,1 right hand (co-driver side)
made in Hungary, good quality, comperes to the original one.
36,31 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 181

Cable conduit, complete

with threaded rod for adjustment of handbrake
  • fit to all Trabant 500, 600, 601 and Trabant 1.1
  • galvaniced metal
  • original spare part
  • delivery without adjustment nut (Art.-Nr.: 6068)
14,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 182

nut for cable conduit

speciall nut for adjustment of handbrake and clutch cable
  • fit to all Trabant 500,600,601 and 1,1
  • hexagon nut, galvaniced
  • original spare part
  • one piece will be needed for each one
3,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6068

Brake cable, left-hand ( short ) -Made in Germany-

Bowden cable for hand brake, fit to all Trabant.
  • short brake wire - left side
  • length complete: 100 cm
  • length wrapper: 560 mm
  • diameter: wire: 3,5 mm
  • diameter wrapper: 11 mm
  • delivery with grease nipple
  • one piece will be needed
38,40 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6205

Brake cable, right-hand ( long ) -Made in Germany-

Bowden cable for hand brake, fit to all Trabant.
  • long brake wire - left side
  • length complete: 144 cm
  • length wrapper: 560 mm
  • diameter: wire: 3,5 mm
  • diameter wrapper: 11 mm
  • delivery with grease nipple
  • one piece will be needed
38,40 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6206

Slealing for Hand brake lever

18,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1070

toothed segment for hand brake lever

single part
  • original made in Germany by IFA
  • one piece will be needed
4,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6185

Hand brake lever

Lever for hand brake single part. Delivery without machanical parts.
  • original made in Germany IFA
  • one piece will be needed
35,53 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6306

paste for brake cylinders

special lubricants paste for brake cylinders
no problems with brake fluid and rubber sleevs
commended for new wheel brake cylinders
price 96,39 Euro / kg
17,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6204

Brake hose retainer, original style

sacer spring for connection between flexible brake hose and brake pipe
  • surface bronzing
  • one piece for each screw joint will be needed
2,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 240

Brake hose retainer

sacer spring for connection between flexible brake hose and brake pipe
not the same design like the originale one (made for VW). This retainer can be also used for Trabant and Wartburg.
  • electrogalvanized, black
  • high quality made in Germany, spring metal
  • one piece for each screw joint will be needed
2,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6624

Screw-cap for brakeline 4,75x0,7 Trabant

Screw-cap for breakline 4,75mm x 0,7mm
fit to Trabant 500, 600, 601 and Trabant 1,1
0,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 264

Brake pipe spanner 10-11mm angled

Special tool for mounting or demounting of screw-cap for brakelines.
type: level angleded
Fit to brake screws SW10 and SW11.
12,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7702

Brake pipe spanner 12-13mm, straight

Special tool for mounting or demounting of screw-cap for brakelines.
type: sraight
Fit to brake screws SW12 and SW13.
12,43 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7992

Brake pipe spanner 10-11mm, straight

Special tool for mounting or demounting of screw-cap for brakelines.
type: sraight
Fit to brake screws SW10 and SW11.
9,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7703

brake-cleaner 600ml

quick-cleaner for brake and clutch parts
  • FCKW free
  • volume: 600 ml
  • type: AD
  • delivery as an single spray
price 7,62 Euro / liter
4,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6252

Brake-cleaner XXL 850ml

quick-cleaner for brake and clutch parts
  • FCKW, aceton free
  • volume: 850 ml
  • delivery as an single spray
price 5,29 Euro / liter
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7898

Brake-cleaner, one packing unit, 12x Sprayer 600ml

Complete packing unit quick-cleaner for brake and clutch parts
  • FCKW free
  • content: 12x sprayer with volume of 600 ml
That implies a price of a single sprayer of 3,90 €price 6,50 Euro / liter
46,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7033

lever for parking brake comlete

handbrake lever for the parking brake of the Trabant 500,600,601 and 1.1
  • delivery inclusive unkock push button and toothed segment
  • one piece will be needed
161,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6857

Brake shoe set rear axle, overhauled

The set consists of four brake shoes fit to Trabant 500,600 and 601.
The breke shoes will be complete overhauled in Germany.
Please note: your old brake shoes have to be shipped to us before we send you the spare part.
122,17 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7322

Pressure spring spline end for brake shoes

Spring for the automatic adjuster of the break shoes at the brake base plate.
This spring press the look plate that the sliding element can work only in one direction.
fit to follow brake systems:
  • 4 pieces for brake drum front axle Trabant 601
  • 4 pieces for brake drum rear axle Trabant 601 or 1,1
  • 2 pieces for trailer Qek with hydraulic brake system
  • delivery as an single part
  • made in Germany

additional needed tools for deassembly / assembly:
  • no special tools will be needed
2,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8264

Bleeder screw cap with tongue

Rubber cap with additional tongue fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
The flap kibosh loosing the complete cap.
  • material: brake fluid resistant rubber
  • made in EU
1,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8446

Rear brake shoe set complete

The brake shoe rear set consist of an metal basic part and an lining.
Complete set inclusive 4 brake shoes: 2 x with long lining and 2 x with short lining inclusive mounted lever for the hand brake cable.
Fit to Trabant 601 and Trabant 1,1.
Also fit to some trailers and campers like Qek and Camptourist / Klappfix with hydraulic brake system.
  • 2x lining length: 215 mm
  • 2x lining length: 165 mm
  • lining thickness: 4 mm
  • wide: 30 mm
  • for brake drum diameter: 200 mm
  • one set will be needed for each car
45,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8593
The complete offer in Rear brake parts

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas