This site in german: Trabant 601 > Ersatzteile > Hinterachse 
You are here: > Trabant 601> Spare parts> Rear axle
Navigation

Parts, units and components for the Trabant rear axle

Category Parts, units and components for the Trabant rear axle has the following subcategorys:

The product category Trabant 601 > Spare parts > Rear axle is spread over 4 sites:

1234
Show all products

Wheel bearing 6206 C2

One row grooved ball bearing 6206 C2, bearing for rear axle Trabant 601 and front axle Trabant 601 (univesal driven shaft-old type, up to 03/1984).
For one wheel will be needed 2 pices.
For a complete Trabant 601 with univesal driven shaft-old type you will need 8x 6206 C2.
For a Trabant with universal driven shaft-new type (tripode)you will need 4 pices.
  • made in Germany
18,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 992
Delivery only at advance payment.

Wheel bearing set, rear axle FAG

Rear axle bearing-set consit of:
  • 2 pieces bearings 6206 C2
  • 1 piece radial sealing 48 x 62 x 8 without additional dust lip
  • 1x grease
  • 1x lock plate axle

All parts maufactured by FAG.
For each wheel side, one set will be needed
44,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7481

Wheel bearing set, rear axle 6206 C2

Rear axle bearing-set consit of:
  • 2 pieces bearings 6206 C2
  • 1 piece radial sealing 48 x 62 x 8 with additional dust lip
  • 1x snap ring wheel bearing
  • 1x lock plate axle

All parts made in Germany with high quality.
For each wheel side, one set will be needed
44,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7273
Delivery only at advance payment.

snap ring for wheel bearings

One snap ring to fix ball bearings for rear axle Trabant and front axle Trabant 601 (universal driven shaft-old type, up to 03/1984).
  • for each hole diamter of 62 mm

For one wheel will be needed 1 piece.
For a complete Trabant 601 with univesal driven shaft-old type ( front and rear axle) you will need 4x.
For a Trabant with universal driven shaft-new type (601 and 1.1) you will need only 2 pieces for rear axle.

Needed plier for dismounting and mounting (not part of this offer):
1x Seeger ring pliers, external retaining rings 40-100mm (LDM-part.-Nr.:8332)
1,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6764

Pressure spring for wheel bearings

One pressure spring to keep apart the inner rings of both ball bearings (6206 C2) from rear axle Trabant (only with conical stub axle) and front axle Trabant 601 (universal driven shaft-old type, up to 03/1984).

For one wheel will be needed 1 piece.
For a complete Trabant 601 with univesal driven shaft-old type ( front and rear axle) you will need 4x.
For a Trabant with universal driven shaft-new type (601 and 1.1) you will need only 2 pieces for rear axle.
8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6949
Delivery only at advance payment.

Pressure sleeve for wheel bearings

One pressure tubee to keep apart the inner rings of both ball bearings (6206 C2) from rear axle Trabant 601 (only with cylindrical stub axle form 03/1984) and Trabant 1.1 rear axle.
  • For one wheel will be needed 1 piece
  • material: steel, blank


For a Trabant with universal driven shaft-new type (601 and 1.1) you will need only 2 pieces for rear axle.
18,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7975
Delivery only at advance payment.

Radial seal, rear axle 48x62x8

radial seal 48x62x8 for sealing of:
  • cylindrical and conical rear axle of Trabant 500, 600 and 601
  • cylindrical rear axle of Trabant 1.1
  • outer hinge shaft for front axle of Trabant 500, 600 und 601 (built up to April 1984)
  • high quality
  • for each wheel side you will need 1 piece
5,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 993
Delivery only at advance payment.

Radial seal, rear axle 48x62x8 with dust lip

radial seal 48x62x8 with dust lip for sealing of:
  • cylindrical and conical rear axle of Trabant 500, 600 and 601
  • cylindrical rear axle of Trabant 1.1
  • outer hinge shaft for front axle of Trabant 500, 600 und 601 (built up to April 1984)
  • high quality
  • with additional dust lip to protect the sealing lip for the brake dust
  • for each wheel side you will need 1 piece
5,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6118

Hexagon nut M24 x 1,5

Safety axle nut 24 x 1,5 for the shaft- wheel hub connection.
tightening torque: 196 Nm
application:
  • rear axle Trabant 500, 600, 601 without vintage segregation, fit to cylindrical and conical reae wheel hub
  • front axle Trabant with conical wheel hub up to vintage: mai 1984
  • 2 or 4 pieces will be needed
3,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 994

Hexagon nut M24 x 1,5

Safety axle nut 24 x 1,5 for the shaft- wheel hub connection.
This type is made like the genuine part.
tightening torque: 196 Nm
application:
  • rear axle Trabant 500, 600, 601 without vintage segregation, fit to cylindrical and conical reae wheel hub
  • front axle Trabant with conical wheel hub up to vintage: mai 1984
  • 2 or 4 pieces will be needed
3,95 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7040
The product category Trabant 601 > Spare parts > Rear axle is spread over 4 sites:
1234
Show all products
Wir versenden mit DHL.
Banküberweisung
PayPal
SEPA-Lastschrift
© 2003 - 2026 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Spielzeugfiguren von Bullyland, Schleichfiguren | Figurenkiste.de - Spielzeugfiguren