This site in german: Trabant 601 > Ersatzteile > Hinterachse 
You are here: > Trabant 601> Spare parts> Rear axle

Parts, units and components for the Trabant rear axle

Category Parts, units and components for the Trabant rear axle has the following subcategorys:

The complete offer in Parts, units and components for the Trabant rear axle

Disk wheel, overhauled 4J x 13 Zoll

Steel rim for Trabant 601 complete overhauled and prime coated.
  • new or used rim
  • sandblasted
  • primed
  • pitch circle 4 x 160
  • rim wide: 4J
  • rim diameter: 13 Zoll
  • center disc wheel ET 35
69,33 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 986

Disk wheel, overhauled 4J x 13 Zoll (silver)

Steel rim for Trabant 601 complete overhauled and silver varnished.
  • new or used rim
  • sandblasted
  • primed
  • silver varnished with 2-K varnish
  • pitch circle 4 x 160
  • rim wide: 4J
  • rim diameter: 13 Zoll
  • center disc wheel ET 35
95,33 €inclusive VAT, plus shipping costs

Art.No. 6403

Summer tyre Diagonal 5.20-13 70P TL P36

Summer tyre made by Heidenau with original tire profile P36
Diagonal tyre.
  • tyre wide: 5,20
  • wheel diameter: 13"
  • New production made in Germany
  • delivery without tube for tires
104,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6510

winter tyre 145/80 R13 PNEUMANT

winter tyre fit for all types of Trabant made by the original manufacturer
  • tyre with good values in economy, safety and comfort

the pressure for the Trabant tyres type M+S (winter tyre)
Trabant 601 Limousine front axle: 23,21 psi
Trabant 601 Limousine rear axle: 23,21 psi - 26,11 psi
Trabant 601 Universal front axle: 23,21 psi
Trabant 601 Universal rear axle: 23,21 psi - 27,56 psi
49,80 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6511

Hose for R13 tires

Hose insert for the Trabant and Wartburg tires.
Fit to 13 zoll wheels.
  • for tire size: 135,145,155/ 70 R13
  • scope of delivery with tire valve and cap
17,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7416
1+1

Wheel hub, rear axle, cylindrical

Wheel hub for Trabant rear axle from vintage: march 1983.
The bore of this hub is cylindrical.
This wheel hub can only mounted with the Stub axle, cylindrical Trabant (LDM-part.-no.:999).
  • original spare part
  • fit only to the cylindrical stub axle
  • one piece will be needed for each axle (2 pieces total)
  • fit to all Trabant 601 like Limousine, Universal (station wagon) and K├╝bel


additional needed mounting parts (not incuded at this offer):
2x Mounting nut for stub axle (LDM-part.no.:7040)
2x locking plate for wheel hub (LDM-part.no.:995)
2x radial sealing for wheel hub (LDM-part.no.:6118)

Required special tools for disassambly / assambly:
  • brake drum puller (only needed for worn in brake shoes)
  • Please note: try to dismount the brake drum at first.
  • Nut or ring spanner SW 36
  • torque wrench for mounting the hub axle nut: 157...196Nm
148,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 990

Wheel hub final drive / rear axle, conical

Hub for Trabant front universal shaft up to vintage: march 1984 and fit to rear axle with conical axle up to vinatgae march 1983.
  • original spare part
  • does not fit to constant velocity drive shaft
  • one piece will be needed for each axle
155,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 980

Wheel bolt

The bolt have to be pressed into the wheel hub.
Fit to all Trabant 500, 600, 601.
  • knurled steel bolt with tap M12 x 1, galvaniced
  • length: 36 mm
  • original spare part
  • for each wheel 4 pieces will be needed
5,23 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 985

wheel bolt 80mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 80mm consist the length of thread and the length of knurling.
  • legth: 80mm
  • thread: M12 x 1,5
  • thread length: 68mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7203

wheel bolt 50mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 50mm consist the length of thread and the length of knurling.
  • legth: 50mm
  • thread: M12 x 1,5
  • thread length: 38mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,86 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6450

wheel bolt 40mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 40mm consist the length of thread and the length of knurling.
  • legth: 40mm
  • thread: M12 x 1,5
  • thread length: 28mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,98 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7200

wheel bolt 60mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 60mm consist the length of thread and the length of knurling.
  • legth: 60mm
  • thread: M12 x 1,5
  • thread length: 48mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,62 €inclusive VAT, plus shipping costs

Art.No. 7201
1+1

Stub axle, conical

Conical stub for rear axle of the Trabant500, 600 and 601 built up to vintage 03/1983.
Late type of the conical shaft with round pin.
Delivery as an single part but inclusive pin.
32,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 998

Woodruff key rear stub axle, conical

Key for the conical stub for rear axle of the Trabant 500, 600 and 601.
Earlyer type of the conical shaft with groove.
Delivery as an single.
1,34 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7710

Stub axle, cylindrical

Arbor for the Trabant 601 rear wheel. Fit to all models from vintage april 1983.
  • length: 108mm
  • high quality, made in EU
  • one piece will be needed for each rear wheel side
31,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 999

Inner protection cap ( rubber ) for stub axle

Grease cap made of rubber. Mounting at the wheelbearing case rear axle. This rubber cap protect the rear wheel bearing against dust and moisture.
  • original spare part
  • two pieces will be needed
5,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 996

Wheel bearing 6206 C2

One row grooved ball bearing 6206 C2, bearing for rear axle Trabant 601 and front axle Trabant 601 (univesal driven shaft-old type, up to 03/1984).
For one wheel will be needed 2 pices.
For a complete Trabant 601 with univesal driven shaft-old type you will need 8x 6206 C2.
For a Trabant with universal driven shaft-new type (tripode)you will need 4 pices.
  • made in Germany
18,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 992

Wheel bearing set, rear axle FAG

Rear axle bearing-set consit of:
  • 2 pieces bearings 6206 C2
  • 1 piece radial sealing 48 x 62 x 8 without additional dust lip
  • 1x grease
  • 1x lock plate axle

All parts maufactured by FAG.
For each wheel side, one set will be needed
44,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7481

Wheel bearing set, rear axle 6206 C2

Rear axle bearing-set consit of:
  • 2 pieces bearings 6206 C2
  • 1 piece radial sealing 48 x 62 x 8 with additional dust lip
  • 1x snap ring wheel bearing
  • 1x lock plate axle

All parts made in Germany with high quality.
For each wheel side, one set will be needed
44,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7273

snap ring for wheel bearings

One snap ring to fix ball bearings for rear axle Trabant and front axle Trabant 601 (universal driven shaft-old type, up to 03/1984).
  • for each hole diamter of 62 mm

For one wheel will be needed 1 piece.
For a complete Trabant 601 with univesal driven shaft-old type ( front and rear axle) you will need 4x.
For a Trabant with universal driven shaft-new type (601 and 1.1) you will need only 2 pieces for rear axle.

Needed plier for dismounting and mounting (not part of this offer):
1x Seeger ring pliers, external retaining rings 40-100mm (LDM-part.-Nr.:8332)
1,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6764

Pressure spring for wheel bearings

One pressure spring to keep apart the inner rings of both ball bearings (6206 C2) from rear axle Trabant (only with conical stub axle) and front axle Trabant 601 (universal driven shaft-old type, up to 03/1984).

For one wheel will be needed 1 piece.
For a complete Trabant 601 with univesal driven shaft-old type ( front and rear axle) you will need 4x.
For a Trabant with universal driven shaft-new type (601 and 1.1) you will need only 2 pieces for rear axle.
8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6949

Pressure sleeve for wheel bearings

One pressure tubee to keep apart the inner rings of both ball bearings (6206 C2) from rear axle Trabant 601 (only with cylindrical stub axle form 03/1984) and Trabant 1.1 rear axle.
  • For one wheel will be needed 1 piece
  • material: steel, blank


For a Trabant with universal driven shaft-new type (601 and 1.1) you will need only 2 pieces for rear axle.
16,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7975

Radial seal, rear axle 48x62x8

radial seal 48x62x8 for sealing of:
  • cylindrical and conical rear axle of Trabant 500, 600 and 601
  • cylindrical rear axle of Trabant 1.1
  • outer hinge shaft for front axle of Trabant 500, 600 und 601 (built up to April 1984)
  • high quality
  • for each wheel side you will need 1 piece
5,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 993

Radial seal, rear axle 48x62x8 with dust lip

radial seal 48x62x8 with dust lip for sealing of:
  • cylindrical and conical rear axle of Trabant 500, 600 and 601
  • cylindrical rear axle of Trabant 1.1
  • outer hinge shaft for front axle of Trabant 500, 600 und 601 (built up to April 1984)
  • high quality
  • with additional dust lip to protect the sealing lip for the brake dust
  • for each wheel side you will need 1 piece
5,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6118

Hexagon nut M24 x 1,5

Safety axle nut 24 x 1,5 for the shaft- wheel hub connection.
tightening torque: 196 Nm
application:
  • rear axle Trabant 500, 600, 601 without vintage segregation, fit to cylindrical and conical reae wheel hub
  • front axle Trabant with conical wheel hub up to vintage: mai 1984
  • 2 or 4 pieces will be needed
2,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 994

Hexagon nut M24 x 1,5

Safety axle nut 24 x 1,5 for the shaft- wheel hub connection.
This type is made like the genuine part.
tightening torque: 196 Nm
application:
  • rear axle Trabant 500, 600, 601 without vintage segregation, fit to cylindrical and conical reae wheel hub
  • front axle Trabant with conical wheel hub up to vintage: mai 1984
  • 2 or 4 pieces will be needed
3,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7040

Lock plate, axle

Metal plate for the axle nut 24 x 1,5. Safety mechanism for the shaft- wheel hub connection.
application:
  • rear axle Trabant 500, 600, 601 without vintage segregation, fit to cylindrical and conical reae wheel hub
  • front axle Trabant with conical wheel hub up to vintage: mai 1984
  • material: zinc-coated steel sheet
  • 2 or 4 pieces will be needed
The locking plates were new produced in Germany.
2,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 995

Rubber-ring for rear axle, EU

Elastomer bearing will be mounted form top and from below at the rear axles.
For each wishbone four pieces will be needed.
The rubberbearing fit to all Trabant 500,600,601 and 1,1 rear axle right and left hand.
  • made in EU
  • for each car 8 pieces will be needed
8,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7293

Rubber-ring for rear axle, original

Elastomer bearing will be mounted form top and from below at the rear axles.
For each wishbone four pieces will be needed.
The rubberbearing fit to all Trabant 500,600,601 and 1,1 rear axle right and left hand.
  • original spare part
  • for each car 8 pieces will be needed
9,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 1021

Bushing EU for rear axle

Metal reatainer for the rear axle of the Trabant.
Reproduction made in EU
Connection between rubber bearings and the rear axle at the car underfloor.
  • material: steel, galvaniced
  • made in EU
  • total 4 pieces will be needed
18,56 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8539

Bushing for rear axle

Metal reatainer for the rear axle of the Trabant.
Connection between rubber bearings and the rear axle at the car underfloor.
  • material: steel, galvaniced
  • made in Germany
  • total 4 pieces will be needed
24,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1022

Hexagon haed nut M12

Hexagon bolt for mounting the rear axle wishbones Trabant 500, 600, 601, 1-1.
  • tightening torque: 98...127 Nm
  • strength class: 10.9
  • olive galvaniced
  • length: 60 mm
  • made in Germany
  • four pieces will be needed
4,46 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1020

Bearing for transverse and trailer arm

Rear axle bearing piont for welding in at the car body.
  • Original spare part
  • Fir for Trabant 601 and Trabant 1.1
  • total 4 pieces will be needed
55,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1025

Rear axle assembly, left hand, with brake plate

Rear axle wishbone Trabant 601 left hand. The meatal frame is complete new produced.
The brake anchor plate and the wheel bearing case is overhauled and pre mounted.
Fit for all Trabant P601 models with leafspring or coil spring rear axle.
Please note: Delivery only in exchange.
  • Scope of delivery inclusive brake base plate
  • without add-on components like stub axle, wheel bearings, brake shoes, shock absorber holder ec.
  • one piece will be needed

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send one rear axle Traban left hand to our company in advance.
533,10 €inclusive VAT, plus shipping costs

Art.No. 1023

Rear axle assembly, right hand, with brake plate

Rear axle wishbone Trabant 601 left hand. The meatal frame is complete new produced.
The brake anchor plate and the wheel bearing case is overhauled and pre mounted.
Fit for all Trabant P601 models with leafspring or coil spring rear axle.
Please note: Delivery only in exchange.
  • Scope of delivery inclusive brake base plate
  • without add-on components like stub axle, wheel bearings, brake shoes, shock absorber holder ec.
  • one piece will be needed

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send one rear axle Traban right hand to our company in advance.
533,10 €inclusive VAT, plus shipping costs
Delivery in 14 days.

Art.No. 1024

Rear axle assembly, left hand, single part

Rear axle wishbone Trabant 601 left hand. The meatal frame is complete new produced.
Delivery as an single part without brake anchor plate and the wheel bearing case.
Fit for all Trabant P601 models with leafspring or coil spring rear axle.
  • Scope of delivery without brake base plate, add-on components like stub axle, wheel bearings, brake shoes, shock absorber holder ec.
  • one piece will be needed

For more informations to this exchange part please use the Detail button.
339,35 €inclusive VAT, plus shipping costs
Delivery in 14 days.

Art.No. 8251

Rear axle assembly, right hand, single part

Rear axle wishbone Trabant 601 right hand. The meatal frame is complete new produced.
Delivery as an single part without brake anchor plate and the wheel bearing case.
Fit for all Trabant P601 models with leafspring or coil spring rear axle.
  • Scope of delivery without brake base plate, add-on components like stub axle, wheel bearings, brake shoes, shock absorber holder ec.
  • one piece will be needed

For more informations to this exchange part please use the Detail button.
339,35 €inclusive VAT, plus shipping costs
Delivery in 14 days.

Art.No. 8250

Hub cap , plastic

Plastic cover for the Trabant wheel hub. Fit to conical and cylindrical hubs.
  • material: plastic, black
  • made in EU
  • for each wheel one piece will be needed
4,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1087
The complete offer in Parts, units and components for the Trabant rear axle

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas