This site in german: Trabant 601 > Ersatzteile > Elektrik > Beleuchtung 
You are here: > Trabant 601> Spare parts> Electrical system> Lighting
Navigation

headlights, switches and indicators

The product category Trabant 601 > Spare parts > Electrical system > Lighting is spread over 10 sites:

12345678910
Show all products

Rotary headlamp switch

Two level light switch for the parking lights / had lights, rear lights and dashboard lights.
Fit to all Trabant 601 and 1,1.
Can be used for 6V and 12V electrical system.
Delivery inclusive mounting nut and turning knob (made of plastic).
  • new spare part
  • Made in EU
  • one piece will be needed
32,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 95

Mounting nut for rotary headlamp / wiper switch

Plasic nut for mounting ther two level light switch or thr wiper motor swith at the dashboard. Fit for Trabant 601, 1.1, Wartburg 353 / 1,3 and Barkas.
  • made of plasic
  • delivery as a single part
  • colour black or white
6,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8030
Fog ligths and single parts

Rubber plug for fog lamp

Rubber seal for the connection wire of the front fog lights.
Fit to the round models of the DDR produced fog lamps like at the example picture is shown.
  • delivery as an single part
  • material: rubber, black
Fog lamp is not part of the delivery. Only for illustration
0,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8031

Mounting bolt fog lamp - car body

Hexagon screw inclusive spring washer and nut for mounting the fog lights at the car body.
Screw set made of stainless steel.
Fit to the round models of the DDR produced fog lamps like at the example picture is shown.
  • Set is made of stainless steel
  • 1x screw, 1x nut und 1x spring ring
  • two sets will be needed
Fog lamp is not part of the delivery. Only for illustration
1,84 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8033

Mounting bolt fog lamp - clamp

Hexagon screw inclusive spring washer and nut for mounting the fog lights at the adjustment clamp.
Screw set made of stainless steel.
Fit to the round models of the DDR produced fog lamps like at the example picture is shown.
  • Set is made of stainless steel
  • 1x screw, 1x nut und 1x spring ring
  • two sets will be needed
Fog lamp is not part of the delivery. Only for illustration
1,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8032

Plastic retainer for fog lamp

Retainer for install and adjust the round fog lamps.
New production, made in Germany
Fit to the round models of the DDR produced fog lamps like at the example picture is shown.
  • delivery as an single part
  • material: plasic, black
  • unwrought spare part
  • two pieces will be needed
Fog lamp is not part of the delivery. Only for illustrationunwrought spare part
8,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8387

Oldtimer fog lamp (round)

One set of retro round fog lamps.
Best use for oldtimer and youngtimer.
  • Delivery as set (2 pieces)
  • rear cover: made of plasic,black
  • Lieferung inklusive Leuchtmittel und Dichtungen
  • one kit will be needed

For use at the Trabant you have to order the set of reatinerfor fog lamp, LDM-part.no.: 8389 separatly.
106,74 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 8388

Plastic retainer for fog lamp

Retainer for install and adjust the round fog lamps.
New production, made in Germany
Fit to the round models of the DDR produced fog lamps like at the example picture is shown.
  • delivery as an single part
  • material: plasic, black
  • unwrought spare part
  • two pieces will be needed
Fog lamp is not part of the delivery. Only for illustrationunwrought spare part
17,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8389

Fog lamp angular

Rectangular fog light as very good replacement for the original lights.
High quality made in Germany.
The sizes agree with the genuine spare parts.
technical details:
  • voltage: 12V oder 24V, bulb type: H3
  • with E-mark
  • dimensions: 160mm x 90mm
  • scope of delivery without bulb, inclusive mounting parts
  • the case of the lamp is mad of plastic, black

Can be used for Trabant, Wartburg, B1000 und Multicar.
66,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7431
1-1
The product category Trabant 601 > Spare parts > Electrical system > Lighting is spread over 10 sites:
12345678910
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Spielzeugfiguren von Bullyland, Schleichfiguren | Figurenkiste.de - Spielzeugfiguren