This site in german: Trabant 601 > Ersatzteile > Elektrik > Zündung 
You are here: > Trabant 601> Spare parts> Electrical system> Ignition

Ignition system Trabant 601

The product category Trabant 601 > Spare parts > Electrical system > Ignition is spread over 7 sites:

Spark plug M18 - 225, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (T18).
The heating rate complies 225 (cold spark plug), best use for water and air cooled engines.
Made by NGK, Japan.
Bosch Nr. M225 T1
9,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7530

Spark plug M18 - 260, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (T18).
The heating rate complies 260 (cold spark plug), best use for water and air cooled engines special for tuning engines.
Made by NGK, Japan.
Bosch Nr. M260 T1
8,64 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7531

Screening set 6V

With this set you can shield the ignition system of Trabant 601.
So the broadcast reciever (car radio) can be used in better quality.

This type of shielding set can only be used if voltage of Trabant is 6V and DC-generator is built in and the ignition system is working with contact brakers.
  • genuine sapre part
  • one set will be needed
51,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 1210

electromagnetic shielding set 12V

With this set you can shield the ignition system of Trabant 601.
So the broadcast reciever (car radio) can be used in better quality.

This type of shielding set can only be used if voltage of Trabant is 12V, a AC-generator is built in and the ignition system is working with contact brakers (NOT with EBZA (electronic battery ignition system)).
  • genuine sapre part
  • one set will be needed
51,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 1211

Dial gauge shock proof

High quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in Germany
  • scope of delivery without seperate extension pin
  • shock proof
107,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6821

Dial gauge simple type

High quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in Germany
  • scope of delivery without seperate extension pin
  • non shock proof
65,07 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6820

Dial gauge simple type

Cheap dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
24,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7300

Dial gauge digitale type

Good quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
45,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7301

Extensions pin for Dial gauge, 60mm

Extension for dial gauge. Fit to all offered gauges
  • thread: M2,5
  • diameter: 4mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
3,09 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7302
1+1

Adapter M18 ignition ajustment

adapter for the dial gauge to adjust the ignition point.
Fit to the spark plug tap M18. Hexagon nut for mounting SW 22.
usefull for the fallowing vehicles:
  • made in Germany
  • material: brass
  • Trabant 500,600,601
  • Wartburg 311
  • Framo
  • IFA F8 / F9
  • P70
28,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6819

Adapter M14 ignition ajustment

adapter for the dial gauge to adjust the ignition point.
Fit to the spark plug tap M14. Hexagon nut for mounting SW 22.
usefull for the fallowing vehicles:
  • made in Germany
  • material: brass
  • Trabant 601
  • Wartburg 353
  • Barkas B1000
28,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6818
The product category Trabant 601 > Spare parts > Electrical system > Ignition is spread over 7 sites:
1234567
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Simson Tuning