Ignition system Trabant 601

The complete offer in Ignition system Trabant 601

Electronic ignition control system EBZA Detail Original spare part. ESE-2H 8389.19
185,00 €inclusive VAT, plus shipping costs temporary not available Art.No. 796

Electronic insert for ignition control system EBZA Detail Circuit board as insert for the original EBZA of the Trabant 601. Scope of delivery without pastic box but incusive connetion wires. ESE-2H 8389.19
89,90 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7420

Electronic ignition distributor for EBZA

Detail

Electronic ingnition base plate ignition sensor for the battery ignition system of the Trabant.

delivery inclusive with magnetic ring and sensor, but without towing arm
original spare part

Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.

72,00 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 797

Bearing for electronic ignition distributor for EBZA

Detail

Radial roller bearing for the main shaft of the electronic ingnition base plate ignition sensor for the battery ignition system of the Trabant.
Delivery as an both side covered bearing type:2RS.

made by FAG
two pieces will be needed

12,92 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8037

Sensorring for electronic ignition bas plate EBZA

Detail

Magnatic ring for the electronic ingnition base plate.
Can be ussed for the battery ignition system of the Trabant.

delivery as an single part with out any mounting parts
original spare part

Original Ersatzteilnummer: 8389.18-012.0

45,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7678

Electronic unit for ignition sensor for EBZA

Detail

Electronic ingnition base plate ignition sensor for the battery ignition system of the Trabant.

Made in Germany

29,89 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7017

Towing arm for ignition distributor Detail mechanical connection between crankshaft and magnetic ring of ignition sensor surveyed part (second-hand)
27,04 €inclusive VAT, plus shipping costs temporary not available Art.No. 798

Electronic ignition base plate for 6V, complete

Detail

Retrofitting kit for 6V ignition system of 2-stroke Trabant variants to change from contact breaker system to electronic system.
All mechanical parts will not changed. The centrifugal advance mechanismn will left, too. So the change of ignition timing during low revs will work also after retrofitting.
Special made for 6V system Trabant 500,600 and 601

Advantage:

no mechanical contact breakers (no maintenance work for lubricating and readjusting)
Simplified adjusting of ignition timing for cylinder 2 through automatic adoption of cylinder 2 timing
If necessary the old contact breake ignition plate can be put back later

An additional wire for power supply of ignition system is to install from ignition coil (+6V, terminal 15) to base plate.

159,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7536

Electronic ignition base plate 12V, complete

Detail

Retrofitting kit for 12V ignition system of 2-stroke Trabant variants to change from contact breaker system to electronic system.
All mechanical parts will not changed. The centrifugal advance mechanismn will left, too. So the change of ignition timing during low revs will work also after retrofitting.
Advantage:

no mechanical contact breakers (no maintenance work for lubricating and readjusting)
Simplified adjusting of ignition timing for cylinder 2 through automatic adoption of cylinder 2 timing
If necessary the old contact breake ignition plate can be put back later

An additional wire for power supply of ignition system is to install from ignition coil (+12V, terminal 15) to base plate.

109,48 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 794

Wire harness for electronic ignition base plate

Detail

Cable harness for the electronic base palte (green ignition board and black sensor ring).
The wires are complete inclusive the additional ignition +6V/12V (terminal 15).

fit to the offered 6V and 12V elektronical ignition boards
made in Germany
easy to install

14,30 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7905

Copper connection plug for ignition cable

Detail

easy to handle, just turn the connection plug into the ignition cable (spark- coil side)

fit to all Trabant with two stroke engine
material: brass
two pieces will be needed

2,10 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 822

Rubber seal for cable glant of ignition case

Detail

Rubber for sealing the ignition contorl cable into the ignition case.

Material: rubber, black
made in Deutschland
one piece will be needed

1,76 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6208

Ignition leads for the Trabant two stroke models 6V or 12V

Simple Ignition cable set (no interference suppression)

Detail

Simple set of two ignition cables fit to Trabant 601
Wire colour: blue

Delivery without separately spark plugs (no interference suppression resistor included), the ends of ignition cables are with crimp sleeve for contact to ignition coil and spark plug.

9,80 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7019

Ignition cable set

Detail

set consist of two ignition cable complete with spark plugs and rubber sealing.

20,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6031

Ignition cable set, high quality

Detail

set consist of:

two ignition cable with right length (high quality made in Germanyd, very flexible with silicon-isolation)
two ignition cable end plug
spark plug, made in Germany (water proof)
two rubber sealings

ready for installation

29,46 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6404

Ignition cable (1 m long)

Detail

price for one meter

by ordering of two pieces, you will get one piece of 2m

standard quality

3,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 820

Delivery only at advance payment.

Ignition cable, high quality (1 m long)

Detail

excellent copper-ignition cable made in Germany
low restistance for maximum ignition energy at the spark plug
very flexible, also by cold temperatures, because of silicone isolation

price for one meter
by ordering of two pieces, you will get one piece of 2m

high quality

6,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6405

Delivery only at advance payment.

Seal for connection between ignition coil and ignition cable

Detail

Rubber protection cap for ingniton coil. Protection against dust and spash water. Also for universal use.

lenght: 23 mm
big inner diameter: ca. 14 mm
small inner diameter: ca. 6 mm
made of high quality rubber (soft) rubber
colour: black

3,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6892

Seal for spark plug terminal M14

Detail

Rubber protection cap for spark plug and ingniton wire. Protection against dust and spash water.

1,93 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 817

Seal for spark plug terminal

Detail

Best quality protection cap.
Rubber protection cap for spark plug and ingniton wire. Protection against dust and spash water.
Fit to spark plug terminals M14 and M18.

lenght total: 36,5 mm
diameter (big opening)): 13 mm
diameter (small opening): 5 mm
Fit to ignition cable with outer diameter of 7 mm.

Made in Germany

2,77 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6893

switch unit for ignition look switch Detail Switch unit for ignition look switch. Electrical part of ignition look switch wich is mounted at the backside. Latest version with six blad terminals. Best quality form the original manufacture made in Germany. Fit to Trabant 601 and Trabant 1.1
original spaer part number: 8630.10	19,90 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 825

Ignition look (second hand)

Detail

The ingition look fit to Trabant Trabant 601 (later models) and Trabant 1,1.
Type of look system with mechanical anti-theft device.

checked second hand part
delivery inclisive one key
Complete unit with electric switch for ignition and starter motor
es wird ein Stück benötigt

additional needed special tools for disassenbly / assembly:

should the occasion arise ejector for grooved taper pin at the steering wheel

150,63 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 826

Ignition look ( old type )

Detail

Fit to Trabant 500, 600 and 601 old type (6V) and Barkas B1000 (with ignition look inside dashboard).
key switch for ignition and starter with four terminals:

30 - permanent batterie power
15 - ignition power supply
54 - starter
P - special parking position of key (for car radio)

26,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 827

Rubber cover for ignition key

Detail

Grip rubber for mounting at the ignition key.
This spare part is an original one.
Fit for the vehicles: Trabant, Wartburg, W50, Barkas LO, LD Multicar usw.

material: rubber, black
original spare parts
delivery as an single part

9,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8193

Delivery only at advance payment.

Spare key, copy is made from yor key number

Detail

Production of an spare key for door, ignition or fuel cap looks and so on...
You have to tell us your key number per email, fax or letter.
Keys for the vehicles: Trabant, Wartburg, W50, Barkas LO, LD Multicar usw.

delivery time about one to two weeks
all Trabant 601 / Trabant 1,1, Wartburg 353 / Wartburg 1,3 and Brakas B1000/ B100-1 keys possible

Please write here your keynumber in:
Reproduction time for key ca. 2-3 Wochen !!!nfertigung auf Kundenwunsch, KEINE Rücknahme, Umtausch oder Stornierung / Widerruf nach Zahlungseingang!

29,75 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1341

Delivery only at advance payment.

Fuel cans 10L

Detail

Petrol cans made of 0,9mm steel.
Can be used for diesel, petrol and 2 stroke fuel with oil.
Best use for Old and Youngtimer

made of metal
Volume: 10L
colour: oliv green
with secure pin for closure
UN-certification

58,83 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 1340

Spark plug terminal, straigth original M14, 5 kOhm

Detail

Original terminal as straight version.
Fit to all spark plugs M14 with connector thread M4
With a five kohm resistor for suppression of interference it is a ideal part for most (2-stroke) vehicles, which were bulit in G.D.R.
For some ignitions systems (for example the Electronic ignition base plate) have only to use in tandem with such spark plug terminals (minimum resistor of 5 kohm)

suppression of interference (5 kOhm)
with no additional splash water protection for the ignition cable

Made in Germanyoriginal spare part number: 8825. 1/2

16,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7477

Spark plug terminal original M14, 5 kOhm, sealed

Detail

Original terminal inclusive spray water proof.
Fit to all spark plugs M14 with connector thread M4
With a five kohm resistor for suppression of interference it is a ideal part for most (2-stroke) vehicles, which were bulit in G.D.R.
For some ignitions systems (for example the Electronic ignition base plate have only to use in tandem with such spark plug terminals (minimum resistor of 5 kohm)

inkusive rubber seal
suppression of interference (5 kOhm)
with additional splash water protection for the ignition cable

original spare part

5,97 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7952

Spark plug terminal original M14, 5 kOhm

Detail

Original terminal without spray water proof.
Fit to all spark plugs M14 with connector thread M4
With a five kohm resistor for suppression of interference it is a ideal part for most (2-stroke) vehicles, which were bulit in G.D.R.
For some ignitions systems (for example the Electronic ignition base plate have only to use in tandem with such spark plug terminals (minimum resistor of 5 kohm)

suppression of interference (5 kOhm)
with additional splash water protection for the ignition cable

original spare part

15,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6894

Spark plug terminal M14, 5 kOhm

Detail

Fit to all spark plugs M14 with connector thread M4
With a five kohm resistor for suppression of interference it is a ideal replacement part for most (2-stroke) vehicles, which were bulit in G.D.R.
For some ignitions systems (for example the Electronic ignition base plate have only to use in tandem with such spark plug terminals (minimum resistor of 5 kohm)

suppression of interference (5 kOhm)
with no additional splash water protection

7,35 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6826

2+1

1+1

Spark plug terminal M14 for electromagnetic shielding

Detail

Original spark plug M14 with connection tap for electromagnetic shielding set.
fit to all spark plags M14

genuine spare part
5KOhm
zack-no: HSL78830000
inclusive additional splash water protection
made in Germany
two pieces will be needed

9,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7147

Spark plug terminal M14

Detail

fit to all spark plags M14

without additional splash water protection
made in Europe

3,91 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 815

Spark plug terminal universal 5 kOhm Detail Best terminal without metalcoat for all versions of sparks. Good replacment as the old type of spark plugs with thread type M18. Resistance type suppressor: 5kOhm producer: NGK inclusive rubber seal for ignition wire and spark plug.
9,27 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7724

Ignition coil 6V, diameter 62mm

Detail

This coils can be used for Trabant 500, 600 and 601, Wartburg 313 and Wartburg 313, Framo with voltage of 6V.
Original spare part.
Sizes:

diameter: 62mm
total lenght:156mm
length of the aluminium case: 121mm
threads for connection wires:M5
made in Germany

original spare part number: 8351.103/6

55,72 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 810

Ignition coil 6V, diameter 40mm, Germany

Detail

This coils can be used for Trabant 500, 600 and 601, Wartburg 313 and Wartburg 313, Framo with voltage of 6V.
Original spare part.
Sizes:

diameter: 40mm
total lenght:130mm
length of the aluminium case: 92mm
threads for connection wires: M4

67,33 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7990

Ignition coil 6V, diameter 40mm

Detail

This coils can be used for Trabant 500, 600 and 601, Wartburg 313 and Wartburg 313, Framo with voltage of 6V.
Made in Europe.
Sizes:

diameter: 40mm
total lenght:130mm
length of the aluminium case: 92mm
threads for connection wires: M4

30,46 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7987

Cap for Ignition coil

Detail

Rubber cap for connection wires pin 1 and pin 15 at the ignition coils.
Useable for the 40mm and original 60mm coils with ring pin connection.

material: rubber, black

1,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7991

Retainer for Ignition coil

Detail

Sheet metal retainer for mounting the ignition coils at the right hand wheel case.
Useable for the 60mm coils 6v and 6V.

material: steel, galvaniced

8,92 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7997

Ignition coil 12V, Bosch

Detail

Ignition coil from Bosch.
Can be used for contact breaker ignition and electronic ignition (EBZA)

please note: ignition coils have to changed pairwise!
voltage: 12V
diameter: 55 mm
lenght of case: 112 mm
lenght complete: 144 mm
material: alumium / plastic
fit to all Trabant 601 with 12V system

99,73 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6490

Delivery only at advance payment.

Two-lever contact breaker ignition system complete

Detail

Complete ignition for the Trabant with 6V or 12V system.
Set consist of:

1x ignition base plate complete with contact breaker and condensers
1x Centrifugal advance mechanism
1x ignition case
1x cover for ingnition housing
2x bolt M5 for fit the base plate
original spare part

198,11 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6983

Wire harness for ignition Trabant

Detail

Complete pree mounted wire set for the two-lever contact breaker ignition system of the Trabant.
Wire colour: 1x green, 1x green-red.
Inclusive protection hose, black.
One side will be mounted at the ingition interrupters and the other side at the ignition coils.

original spare partl
scope of delivery inclusive sealing for base plate case
one set will be needed

only use for contact braker ignition systems.

original spare part number: B 2X0,75 / B14

9,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7723

Two-lever contact breaker base plate, complete

Detail

Base plate for the contact ignition system of the Trabant 500,600 und 601.
Scope of delivery: base plate, 2 pieces of contact braker, 2 pieces of condenser.
All components premounted.

new original spare part

68,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 804

Centrifugal advance mechanism for tow lever contact breaker ignition, complete

Detail

Ignition cam advance for the pointer ingnition system of the Trabant 500,600 and 601.
The centrifugal mechanism is only used by starting the engine. After the engine is running, the cam will stay at the normal driving ignition point.
Delivery with hefts, springs and contact breaker cam.

NOS original spare part

original spare part

49,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 803

Spring for Centrifugal advance mechanism for two lever contact breaker ignition

Detail

Tension spring for centrifugal advance mechanism for the 2 lever contact breaker ignition of the Trabant 500, 600 und 601.
This part is an original spare part inclusive plasic protector.

2 pieces will be needed

1,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6187

Delivery only at advance payment.

Cover for ignition case Detail Sealing cover made of plastic for the Trabant 500, 600 and 601 ignition case. The cover protects the igniton sensor unit again dust and moisture. Original spare part.
9,20 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 802

Breakers in different elabortenesses

Contact breaker, EU

Detail

Inexpensively breaker for the ignition controling.
Used for 2 stroke engiene Trabant, Wartburg and Barkas
for Trabant you will need two pices Wartburg and Barkas got three of them.

inclusive lube felt
material: plastic
original spare part
made in EU

4,51 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7299

Contact breaker, original

Detail

Breaker for the ignition controling. Best quality.
used for 2 stroke engiene Trabant, Wartburg and Barkas
for Trabant you will need two pices
Wartburg and Barkas got three of them

without lube felt
material: plastic
original spare part
made in Germany

15,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 805

Contact breaker Pertinax

Detail

used for 2 stroke engiene Trabant, Wartburg and Barkas
for Trabant you will need two pices
Wartburg and Barkas got three of them

old type of contact braker
made of fabric reinforced plastic
made in Germany

25,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6715

Ignition capacitor

Detail

Spark capacitor fit to all Trabant, Wartburg and Barkas with tow stroke engine.

Trabant: 2 pieces will be needed
Wartburg: 3 pieces will be needed
B1000: 3 pieces will be needed

2,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 806

Spark plug M14 - 175, ISOLATOR

Detail

This spark plug is the basic type for Wartburg 353 and Barkas B1000 (2-stroke).
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.

producer: BeruAG Isolator, Germany
spark plug tap: M14 x 1,25
wrench opening: SW21
rating: 175

3,50 €inclusive VAT, plus shipping costs

Delivery in 5 days.

Art.No. 1189

Spark plug set M14 - 175, ISOLATOR

Detail

One set of sparkplugs, 10 pieces inclusive.
This spark plug is the basic type for Wartburg 353 and Barkas B1000 (2-stroke).
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.

inclusive 10 pieces of spark plugs M14, 175
producer: BeruAG Isolator, Germany
spark plug tap: M14 x 1,25
wrench opening: SW21
rating: 175

price for each one: 2,90 Euro

29,90 €inclusive VAT, plus shipping costs

Delivery in 5 days.

Art.No. 7387

Spark plug M14 - 225, ISOLATOR

Detail

standard spark plug for engine of Trabant 601
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.

producer: BeruAG Isolator, Germany
spark plug tap: M14 x 1,25
wrench opening: SW21
rating: 225

3,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1190

Spark plug set M14 - 225, ISOLATOR

Detail

One set of sparkplugs, 10 pieces inclusive.
Standard spark plug for engine of Trabant 601
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.

inclusive 10 pieces of spark plugs M14, 225
producer: BeruAG Isolator, Germany
spark plug tap: M14 x 1,25
wrench opening: SW21
rating: 225

price for each one: 2,90 Euro

29,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7388

Spark plug M14 - 260, ISOLATOR

Detail

High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.

producer: BeruAG Isolator, Germany
spark plug tap: M14 x 1,25
wrench opening: SW21
rating: 260

3,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1191

Spark plug set M14 - 260, ISOLATOR

Detail

One set of sparkplugs, 10 pieces inclusive.
High quality product.
Plaese note: The electrode gap has to be adjusted compere to the ordes of the engine producer.

inclusive 10 pieces of spark plugs M14, 260
producer: BeruAG Isolator, Germany
spark plug tap: M14 x 1,25
wrench opening: SW21
rating: 260

price for each one: 2,90 Euro

29,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7389

Brush for spark plugs

Detail

Brass brush for cleaning of spark plugs.

material: brass / wood
made in Germany
one piece will be needed

4,74 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8566

Spark plug M18 - 175, ISOLATOR Detail M18 spark plug. This part is an NOS spare part with thread M18 x 1,5mm. The spanner gap is 26mm. The heat rating is cose to 175. Can be used for wather cooled two stroke engines like Wartburg, Barkas, Framo, ZW1103
12,50 €inclusive VAT, plus shipping costs temporary not available Art.No. 1192

Spark plug M18 - 175, NGK Detail Spark plug for using at tow stroke engines with thread M18. Good replacement for the original spare part (W18). The heating rate complies 175 (warm spark plug), best use for water cooled engines. Made by NGK, Japan. Bosch Nr. M175 T1 spanner gap: SW 21
11,32 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7529

Spark plug M18 - 225, NGK Detail Spark plug for using at tow stroke engines with thread M18. Good replacement for the original spare part (T18). The heating rate complies 225 (cold spark plug), best use for water and air cooled engines. Made by NGK, Japan. Bosch Nr. M225 T1
11,27 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7530

Spark plug M18 - 260, NGK Detail Spark plug for using at tow stroke engines with thread M18. Good replacement for the original spare part (T18). The heating rate complies 260 (cold spark plug), best use for water and air cooled engines special for tuning engines. Made by NGK, Japan. Bosch Nr. M260 T1
13,11 €inclusive VAT, plus shipping costs Lieferbar innerhalb von 6-8 Wochen. Art.No. 7531

Screening set 6V

Detail

With this set you can shield the ignition system of Trabant 601.
So the broadcast reciever (car radio) can be used in better quality.

This type of shielding set can only be used if voltage of Trabant is 6V and DC-generator is built in and the ignition system is working with contact brakers.

genuine sapre part
one set will be needed

51,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 1210

electromagnetic shielding set 12V

Detail

With this set you can shield the ignition system of Trabant 601.
So the broadcast reciever (car radio) can be used in better quality.

This type of shielding set can only be used if voltage of Trabant is 12V, a AC-generator is built in and the ignition system is working with contact brakers (NOT with EBZA (electronic battery ignition system)).

genuine sapre part
one set will be needed

51,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 1211

Dial gauge shock proof

Detail

High quality dial indicator for example to adujst the ignition timing.

case diameter: 58mm
tolerance: 0,01mm
effective range: 0-10mm
made in Germany
scope of delivery without seperate extension pin
shock proof

107,04 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6821

Dial gauge simple type

Detail

High quality dial indicator for example to adujst the ignition timing.

case diameter: 58mm
tolerance: 0,01mm
effective range: 0-10mm
made in Germany
scope of delivery without seperate extension pin
non shock proof

69,04 €inclusive VAT, plus shipping costs

Delivery in 5 days.

Art.No. 6820

Delivery only at advance payment.

Dial gauge simple type

Detail

Cheap dial indicator for example to adujst the ignition timing.

case diameter: 58mm
tolerance: 0,01mm
effective range: 0-10mm
made in China
scope of delivery without seperate extension pin
non shock proof

24,96 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7300

Dial gauge digitale type

Detail

Good quality dial indicator for example to adujst the ignition timing.

case diameter: 58mm
tolerance: 0,01mm
effective range: 0-10mm
made in China
scope of delivery without seperate extension pin
non shock proof

45,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7301

Extensions pin for Dial gauge, 60mm

Detail

Extension for dial gauge. Fit to all offered gauges

thread: M2,5
diameter: 4mm
tolerance: 0,01mm
effective range: 0-10mm
made in China
scope of delivery without seperate extension pin
non shock proof

3,09 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7302

1+1

Adapter M18 ignition ajustment

Detail

adapter for the dial gauge to adjust the ignition point.
Fit to the spark plug tap M18. Hexagon nut for mounting SW 22.
usefull for the fallowing vehicles:

made in Germany
material: brass
Trabant 500,600,601
Wartburg 311
Framo
IFA F8 / F9
P70

28,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6819

Adapter M14 ignition ajustment

Detail

adapter for the dial gauge to adjust the ignition point.
Fit to the spark plug tap M14. Hexagon nut for mounting SW 22.
usefull for the fallowing vehicles:

made in Germany
material: brass
Trabant 601
Wartburg 353
Barkas B1000

28,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6818

The complete offer in Ignition system Trabant 601

* All prices inclusive VAT and plus shipping costs.