spare parts for the car body Trabant 601

Category spare parts for the car body Trabant 601 has the following subcategorys:

The product category Trabant 601 > Spare parts > Body is spread over 7 sites:

Side member, left side

Side member left hand. This part is an repair-profile for weling in to the car body between the left outer half of rear wheel house and the Front transverse member.

matreial: profiled sheet steel
original IFA-spare part
fit to all Trabant 601 and Trabant 1,1
one piece will be needed

38,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 450

Side member, right side

Detail

Side member right hand. This part is an repair-profile for weling in to the car body between the right outer half of rear wheel house and the Front transverse member.

matreial: profiled sheet steel
original IFA-spare part
fit to all Trabant 601 and Trabant 1,1
one piece will be needed

38,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 451

Snap-in plug for side member

Detail

Plug for round holes in car bodys with a diameter of 22 mm (0,87 inch) and with wall thickness from 0,8 mm up to 2,0 mm.

four pieces needed for each Trabant

Material: thermoplastic rubber
Colour: black
Permanent operation temperature: -40°C - 135°C (temporary up to +150°C)

This type of grommet is very good to mount and demount, excellent for recurrent check and working of inner side of car body. This plug has a height of 5 mm.

2,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 455

Rubber plug for side member, flat

Detail

Plug for round holes in car bodys with a diameter of 22 mm (0,87 inch) and with wall thickness up to 2,4 mm (0,095 inch).

four pieces needed for each Trabant

Material: PVC
Colour: black

This type of plug is a little bit more difficile to mount and demount than the snap-in plug. This plug has a height of about 3 mm in the centre and leveling off to the border. So it has a very smooth lookout.

2,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6929

Set of cable grommet seal

Detail

One set of cable grommet seals with different sizes.
Contens:

40 pieces body hole: 6mm / wire bore: 2mm
40 pieces body hole: 7,5mm / wire bore: 5mm
40 pieces body hole: 9mm / wire bore: 6mm
25 pieces body hole: 11mm / wire bore: 8,5mm
20 pieces body hole: 12mm / wire bore: 10mm
5 pieces body hole: 15mm / wire bore: 12mm
5 pieces body hole : 20,5mm / wire bore: 14,5mm
5 pieces body hole: 23,5mm / wire bore: 17,5mm

15,86 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8608

Rubber membrane plug for holes with diameter of 15mm

Detail

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 15 mm
inner diameter of membrane (max. usable diameter): 9 mm
outer diameter (total): 20 mm

0,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6796

Rubber membrane plug for holes with diameter of 18,5mm

Detail

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 18,5 mm (0,728")
inner diameter of membrane (max. usable diameter): 11 mm (0,433")
outer diameter (total): 23 mm (0,906")

0,97 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6895

Rubber membrane plug for holes with diameter of 25mm

Detail

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 25 mm
inner diameter of membrane (max. usable diameter): 18,5 mm
outer diameter (total): 30,5 mm
thickness: 7 mm

1,27 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7625

Rubber membrane plug for holes with diameter of 20,5mm

Detail

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 20,5 mm
inner diameter of membrane (max. usable diameter): 13,5 mm
outer diameter (total): 25 mm
thickness: 7 mm

1,05 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6797

Rubber membrane plug for holes with diameter of 28mm

Detail

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 28 mm
inner diameter of membrane (max. usable diameter): 21 mm
outer diameter (total): 35 mm

1,57 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6798

The product category Trabant 601 > Spare parts > Body is spread over 7 sites:

1 2 3 4 5 6 7
Show all products

* All prices inclusive VAT and plus shipping costs.