This site in german: Trabant 601 > Ersatzteile > Karosserie 
You are here: > Trabant 601> Spare parts> Body
Navigation

spare parts for the car body Trabant 601

Category spare parts for the car body Trabant 601 has the following subcategorys:

The complete offer in spare parts for the car body Trabant 601

finsih sprayer, color: glacier blue

name of the color in Germany: gletscherblau

contens: 150ml
Acrylic lacquer
Price: 62,80 Euro / Liter
9,42 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6245

Finsih sprayer 2K, color: papyrus (white)

Tow componet spray paint for small repair and car painting of Trabant.
Contens: 400ml as special made 2K
The secound componet (harder) is filled up at an separate part of the spray tin.
You can activate it when you need the colour.
Name of the color in Germany: Papyrus(white)
  • Contens: 400ml Papyrus white
  • after activating the secound componet (harder and colour) you should work off the contens during the next time
  • made in Germany
Price: 96,05 Euro / Liter
38,42 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6246

finsih sprayer, color: delphin grey

Spray paint name of the color in Germany: delphingrau
contens: 400ml
2K-varnish
Price: 96,05 Euro / Liter
38,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6414

Grinding fleece - pad, rot

Fleece to buff surfaces form coatings and cleaning of aluminium, brass ec.
Can be used for working by hand.
  • Price per pice
  • Pice size: 100x10mm and 20cm long
  • Rauheit: very fine: 320
Price: 5,35 Euro / Meter
1,07 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7889

Finsih sprayer, color: dark black, shining

Colour spray best use for old and Youngtimers. For coating axle parts, seatframes, wheeles, engines etc.
Tin contens: 400ml.
Two component paint with seperate colour and hardener
Price: 83,55 Euro / Liter
33,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7742

finsih sprayer, color: panama green

Spray paint name of the color in Germany: Panamagrün
this color was used for instance for 1989 Trabant 601 estate car

400ml acrylic paint for car body
Price: 83,55 Euro / Liter
33,42 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6247

Finsih sprayer, color: black, mat

Colour spray best use for old and Youngtimers. For coating axle parts, seatframes, wheeles, engines etc.
Tin contens: 400ml RALLYE SCHWARZ MATT.
Single component Acryl paint.
Produced by Dupli Color.
Price: 24,08 Euro / Liter
9,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7743
1+1

Trademark for radiator grille Trabant 601, stainless steel

Trademark S-with wings for mounting at the Trabant 601 radiator grill.
Fit to Trabant 601 Standard and Sonderausführung (S).
New reproduction, made of stainless steel.
93,30 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6452
Delivery only at advance payment.

Trademark for radiator grille Trabant 601, chrome

Trademark S-with wings for mounting at the Trabant 601 radiator grill.
Fit to Trabant 601 Standard and Sonderausführung (S).
New reproduction, made of steel, surface chrome
98,55 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 8618

Plug for body

Small plug for holes diameter 5mm.
Can be used for the car body.
  • material: rubber, black
  • total length: 27mm
  • made in Germany
2,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7705

Sealing for bowden wires

Small rubber plug to seal the cables and bowden wires through the bulkhead from the passenger compartment to the Trabi engine compartment.
Can be used for choke and 2x heating control wires (heating´mixing chamber)
  • material: rubber, black
  • for Trabant, all types
  • made in Germany
2,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8147

Screw 2,9mm for cover moulding roof

Stainless steel screw slotted for the aluminium stips.
  • material: A2
  • head design: round-head tapping screw
  • sation wagon will be 17 pieces needed
  • Limousine will be 15 pieces needed
  • price per piece
0,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6817

Screw-Set 2,9mm for cover moulding roof

One Set of Stainless steel screw slotted for the aluminium stips.
  • material: A2
  • head design: round-head tapping screw
  • sation wagon will be 17 pieces needed
  • Limousine will be 15 pieces needed
  • Set constist of 20 pieces
piece: 0,35 Euro / piece
6,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8637

Screw 3,5mm for cover moulding roof

Stainless steel screw slotted like the original type. The length is the same like original but the diameter is thicker (3,5mm).
Best use to fix the aluminium stips with worn out holes at the roof.
Can be used for all alu strips at the roof.
Fit to all Trabant and Trabant 1.1 models and types.
  • material: A2
  • head design: round-head tapping screw
  • sation wagon will be 17 pieces needed
  • Limousine will be 15 pieces needed
0,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8146

Screw 3,5mm for cover moulding roof

Stainless steel screw slotted like the original type. The length is the same like original but the diameter is thicker (3,5mm).
Best use to fix the aluminium stips with worn out holes at the roof.
Can be used for all alu strips at the roof.
Fit to all Trabant and Trabant 1.1 models and types.
  • material: A2
  • head design: round-head tapping screw
  • sation wagon will be 17 pieces needed
  • Limousine will be 15 pieces needed
  • Set consist of 20 pieces
Price: 0,38 Euro / piece
7,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8638

Screw-Set 2,9mm for cover moulding mudguards and doors

Stainless steel screw slotted -kit like the original type and size to fix the aluminium stips. Can be used for all alu strips at the mudguards front and rear and at the doors as well.
Fit to all Trabant and Trabant 1.1 models and types.
  • contens: 50 pieces
  • material: A2
  • head design: round-head tapping screw
7,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8082

Mudgard screw, original diameter

Stainless steel screw slotted for mounting the plasic wings at the car body.
Best peplacement for the original one without corrosion.
Fit to all Trabant 601 and 1,1 all models also Kübel and Tramp.
  • material: A2
  • type: tapping screw, original diameter
  • price per piece
0,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7720

Mudgard screw-set, original diameter

One set of stainless steel screw slotted for mounting the plasic wings at the car body.
Best peplacement for the original one without corrosion.
Fit to all Trabant 601 and 1,1 all models also Kübel and Tramp.
  • material: A2
  • type: tapping screw, original diameter
  • set constist of 100 pieces
price: 0,10 Euro / piece
9,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8639

Mudgard screw, 3,9mm diameter

Stainless steel screw slotted for mounting the plasic wings at the car body.
Best peplacement for the original one without corrosion.
Fit to all Trabant 601 and 1,1 all models also Kübel and Tramp.
  • material: A2
  • type: tapping screw diameter: 3,9mm
  • price per piece
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8168

Mudgard screw-set, 3,9mm diameter

Stainless steel screw slotted for mounting the plasic wings at the car body.
Best peplacement for the original one without corrosion.
Fit to all Trabant 601 and 1,1 all models also Kübel and Tramp.
  • material: A2
  • type: tapping screw diameter: 3,9mm
  • set consist of 100 pieces
Price: 0,11 Euro / piece
10,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8640

Screw for radiator cover

Stainless steel screw slotted for the aluminium cover front (radiator grill).
Best peplacement for the original one without corrosion.
Fit to all Trabant 601 and 1,1 all models also Kübel and Tramp.
Please note for the Trabant 601 Standard up to vintage 1970.
  • material: A2
  • head design: round-head tapping screw
  • six pieces will be needed
  • delivery inclusive washer ans nut
0,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7717

Front transverse member

Front transverse member is welded across in front of the car. It is the girder for the engine-gearbox underfarme. At the side wall it is the connection to the side member left or right hand. The six holes for the underframe are not drilled.
Scope of delivery complete with two car-jack points (pipe D= 30mm, d= 25mm, L= 76mm)
fit to all Trabant 601.
  • coated with transport sealing varnish
  • made in Germany
  • one piece will be needed
365,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 441

Alu Spray 400ml

Spray on the basis of special mixture of resins and aluminium pigments.
Aluminium-zinc doubleprotection.
Best resistance to high temperatures.
Excellent for use at exhaust systems and for car body works.
  • contens: 400ml
  • product is free of FCKW
  • heat resistance up to approx 800 °C
price: 46,05 Euro / liter
18,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7493

Side member, left side

Side member left hand. This part is an repair-profile for weling in to the car body between the left outer half of rear wheel house and the Front transverse member.
  • matreial: profiled sheet steel
  • original IFA-spare part
  • fit to all Trabant 601 and Trabant 1,1
  • one piece will be needed
38,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 450

Side member, right side

Side member right hand. This part is an repair-profile for weling in to the car body between the right outer half of rear wheel house and the Front transverse member.
  • matreial: profiled sheet steel
  • original IFA-spare part
  • fit to all Trabant 601 and Trabant 1,1
  • one piece will be needed
38,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 451

Snap-in plug for side member

Plug for round holes in car bodys with a diameter of 22 mm (0,87 inch) and with wall thickness from 0,8 mm up to 2,0 mm.

four pieces needed for each Trabant

  • Material: thermoplastic rubber
  • Colour: black
  • Permanent operation temperature: -40°C - 135°C (temporary up to +150°C)

This type of grommet is very good to mount and demount, excellent for recurrent check and working of inner side of car body. This plug has a height of 5 mm.
2,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 455

Rubber plug for side member, flat

Plug for round holes in car bodys with a diameter of 22 mm (0,87 inch) and with wall thickness up to 2,4 mm (0,095 inch).

four pieces needed for each Trabant

  • Material: PVC
  • Colour: black

This type of plug is a little bit more difficile to mount and demount than the snap-in plug. This plug has a height of about 3 mm in the centre and leveling off to the border. So it has a very smooth lookout.
2,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6929

Set of cable grommet seal

One set of cable grommet seals with different sizes.
Contens:
  • 40 pieces body hole: 6mm / wire bore: 2mm
  • 40 pieces body hole: 7,5mm / wire bore: 5mm
  • 40 pieces body hole: 9mm / wire bore: 6mm
  • 25 pieces body hole: 11mm / wire bore: 8,5mm
  • 20 pieces body hole: 12mm / wire bore: 10mm
  • 5 pieces body hole: 15mm / wire bore: 12mm
  • 5 pieces body hole : 20,5mm / wire bore: 14,5mm
  • 5 pieces body hole: 23,5mm / wire bore: 17,5mm
15,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8608

Rubber membrane plug for holes with diameter of 15mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 15 mm
inner diameter of membrane (max. usable diameter): 9 mm
outer diameter (total): 20 mm
0,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6796

Rubber membrane plug for holes with diameter of 18,5mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 18,5 mm (0,728")
inner diameter of membrane (max. usable diameter): 11 mm (0,433")
outer diameter (total): 23 mm (0,906")
0,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6895

Rubber membrane plug for holes with diameter of 25mm

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 25 mm
inner diameter of membrane (max. usable diameter): 18,5 mm
outer diameter (total): 30,5 mm
thickness: 7 mm
1,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7625

Rubber membrane plug for holes with diameter of 20,5mm

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 20,5 mm
inner diameter of membrane (max. usable diameter): 13,5 mm
outer diameter (total): 25 mm
thickness: 7 mm
1,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6797

Rubber membrane plug for holes with diameter of 28mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 28 mm
inner diameter of membrane (max. usable diameter): 21 mm
outer diameter (total): 35 mm
1,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6798

Rubber membrane plug for holes with diameter of 32mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
  • fit to hole diameter of 32 mm
  • inner diameter of membrane (max. usable diameter): 25 mm
  • outer diameter (total): 39 mm
  • thicknes of the menbrane: 1mm
  • total thickness: 9mm
2,23 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7613

Rubber membrane plug for holes with diameter of 37mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 37 mm
inner diameter of membrane (max. usable diameter): 29 mm
outer diameter (total): 44 mm
1,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6799

Rubber membrane plug for holes with diameter of 47mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)
  • fit to hole diameter of 47 mm
  • inner diameter of membrane (max. usable diameter): 36 mm
  • outer diameter (total): 54 mm
  • thicknes of the menbrane: 1mm
  • total thickness: 10mm
2,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6800
1+1

Lower side part left side

Lower side part from the doorway left hand. This part is an repair-profile for weling in to the car body on top of the side member.
  • matreial: profiled sheet steel
  • fit to all Trabant 601 and Trabant 1,1
  • one piece will be needed
25,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 460

Lower side part right side

Lower side part from the doorway right hand. This part is an repair-profile for weling in to the car body on top of the side member.
  • matreial: profiled sheet steel
  • fit to all Trabant 601 and Trabant 1,1
  • one piece will be needed
25,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 461

Lower side part protector

Lower side part protector is fitted under the doors.
Fit to all Trabantz 601 from year: November 1984 (limousine), and from year January 1985 (station wagon)
  • material: plastic
  • colour: black
  • original made in Germany
  • 2 pieces will be needed
Price: 25,90 Euro / Meter
25,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 462

Outer lower part of luggage boot ( station-wagen )

Rear metal sheet of the car boot Trabant Universal (station wagon).
Fir to Trabant 1,1 and Trabant 601 types.
Original spare part.
please ask for availability!
200,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 504

Outer lower part of boot ( Limousine )

Rear metal sheet of the car boot Trabant Limousine.
Fir to Trabant 1,1 and Trabant 601 types.
Original spare part.
please ask for availability!
200,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 505

Boot lid ( Limousine )

fit to car body variant limousine of Trabant 601 and Trabant 1.1
original IFA spare part
195,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 511

Boot lid hinge, complete

Complete premounted component. Fit to all Trabant 601 and 1,1 without vintage dissociation.
  • original spare part
  • two pieces will be needed
44,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 515

Rubber section for boot lid

Profile rubber for sealing the car boot of the Trabant Limousine. D
Brillant rubber sealing, perfect fit, in best quality. Made in Germany.
  • length: 2,92 meter
  • material: rubber, black
  • fit for all Trabant 601 and 1.1 Limousine
  • one piece will be needed
Price: 11,61 Euro / Meter
34,84 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 516

Clamping piece for rubber section

9,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 518

Boot lid lock Limousine, original

Genuine part tailgate lock for the Limousine of the Trabant 601 and 1.1 witjout vintage limit.
  • delivery inclusive lock and two keys
  • inclusive sealing plate
  • inklusive mounting holder
  • one piece will be needed
  • NOS, original spare part
94,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7396

Rear rubber lining for boot lid look

Sealing for the boot look of the Trabant type Limousine.
The rubber will be mounted behind the aluminium look.
Fit ot all tailgates of the T601 and T1,1.
  • material: Gummi, black
  • original spare part
  • one piece will be needed
2,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1180

Boot lid look catch, Limousine

The plasitc look catch will be mounted at the outer lower part of boot of the Trabant type Limousine.
The plastic part will hold the arrester hook and secure if the tailgate is cloused.
Fit ot all tailgates of the Trabi 601 and T1,1.
  • material: PVC
  • original spare part
  • one piece will be needed
6,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1181
1+1

Bearing for transverse and trailer arm

Rear axle bearing piont for welding in at the car body.
  • Original spare part
  • Fir for Trabant 601 and Trabant 1.1
  • total 4 pieces will be needed
55,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1025

Boot lid Limousine, GRP lightweight construction

boot lid fit to Trabant 601 and 1,1
  • lightweight construction
  • made of glass fibre reinforced plastic
  • without hole for boot lid lock
  • weight: circa 1,5 kg
109,62 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 2260

Front rim, prime coated

Headlamp rim for Trabant 500,600, 601 und 1,1.
Mountable for R2 (Bilux) and H4 headlights.
  • Front rim fit to the left and to the right side
  • material: metal shrink boot
  • original spare part
  • two pieces will be needed
44,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 53

Flexible edge protector, white-grey

universal to use

price for one meter
Price: 3,60 Euro / Meter
3,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6073

Roof for limousine

original body part.
Please note: no shipping possible.
Please note: no shipping possible.
255,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6115

Bitumen/plastic plates, foil-laminated

Self-adhesive absorbing plates for sheet metal parts (car doors, computer cases or something else).
  • with aluminium foil-laminated
  • colour: silver
  • content: 6x pltes with 500 x 250mm
  • thickness: about 2mm
  • weight per unit of area: 3,7 kg/m²
Price: 87,55 Euro / m²
72,23 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6891

Mounting bolt for interior lining

Special srew made of stainless steel.
0,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7745

Accelerator pedal with pressure spring

Gas pedal with additional pressure point spring for Trabant 601 latest model.
  • Original spare part
  • one piece will be needed
21,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7977

Interior lamp

Lamp for the Trabant 601 and 1,1 interior.
For the insert will be nedded:
1x tubular bulb 6V: LDM-no.: 121
1x tubular bulb 12V: LDM-no.: 135
  • original spare part
  • delivery without bulb
original spare part no. 8838-173
12,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 98

Underbody protection wax 500ml, Spray

Protecton wax for the underside and wheel cases for many vehicles.
To spray the wax no special tools will be needed.
Recommended amount 300g/qm, source function 1,5qm.
Best use for body work, vehicle manufacturing and road maintenance.
The wax protect the cars against mechanical and chemical stress like rock chips, gritting salt, water and so on. And corrosion will be bewared.
  • contens: 500ml
  • corrosion protection at salt dust like DIN 50021: 500 hours without rost
  • Dust dry after 2 hours, dry after 4-5 hours
  • temperature from -25° C bis 80° C
  • wax based product
  • colour: brown
Price: 18,76 Euro / Liter
9,38 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8088

Underbody protection wax 1000ml

Protecton wax for the underside and wheel cases for many vehicles.
To spray the wax an special atomizer pistol lance will be needed.
Recommended amount 300g/qm, source function 3-4qm.
Best use for body work, vehicle manufacturing and road maintenance.
The wax protect the cars against mechanical and chemical stress like rock chips, gritting salt, water and so on. And corrosion will be bewared.
  • contens: 1000ml
  • corrosion protection at salt dust like DIN 50021: 500 hours without rost
  • Dust dry after 2 hours, dry after 4-5 hours
  • temperature from -25° C bis 80° C
  • wax based product
Price: 10,67 Euro / Liter
10,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8087

Underbody protection 1000ml

Protecton wax for the underside and wheel cases for many vehicles.
To spray the underbody an special atomizer pistol lance will be needed.
Best use for body work, vehicle manufacturing and road maintenance.
The bitumen protect the cars against mechanical and chemical stress like rock chips, gritting salt, water and so on. And corrosion will be bewared.
  • contens: 1000ml
  • corrosion protection at salt dust like DIN 50021: 500 hours without rost
  • Dust dry after 4-5 hours
  • dry afer 24 houers
  • temperature from -25° C bis 80° C
  • bitumen based product
Price: 21,10 Euro / Liter
21,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8293

Body-cavity sealing, Elaskon 1000ml

Protecton wax for the body cavity and frames for many vehicles.
To spray the wax will be an special atomizer pistol lance will be needed.
Recommended amount 250g/qm.
Best use for body work, vehicle manufacturing and road maintenance.
The wax protect the cars against mechanical and chemical stress like rock chips, gritting salt, water and so on. And corrosion will be bewared.
  • contens: 1000ml
  • Dry after 4-8 hours
  • temperature from -25° C bis 80° C
  • wax based product
Price: 14,70 Euro / Liter
14,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8404

Compressed air underbody protection gun

simple air gun for spray off protecton wax at the body and frames for many vehicles.
Best use for body work, vehicle manufacturing and road maintenance.
  • delivery inclusive additional cavity tube
46,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8421

Compressed air underbody protection gun

Simple air gun for spray off protecton wax at the body and frames for many vehicles.
Best use for body work, vehicle manufacturing and road maintenance.
  • only use for underbody protection
30,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8422

Zinc-alu Spray 400ml

Spray on the basis of special mixture of resins and aluminium pigments.
Aluminium-zinc doubleprotection.
Best resistance to high temperatures.
Excellent for use at exhaust systems and for car body works.
  • contens: 400ml
  • product is free of FCKW
  • heat resistance up to approx 300 °C
price: 22,25 Euro / liter
8,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8428

PVC-section for cover moulding, complete for one car, 7 meter, BLACK

One komplett set of black plastic profile for mounting inside the aluminum stripes along the front / rear fenders and doors.
Good quality reproduction, made in Germany
  • colour: black
  • fit for all Trabant 601 and 1,1
  • Limousine and station wagon
  • delivery as one piece (7m)
  • one set will be needed
Price: 4,29 Euro / Meter
30,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 541

PVC-section for cover moulding, complete for one car, 7 meter, GREY

One komplett set of grey plastic profile for mounting inside the aluminum stripes along the front / rear fenders and doors.
Good quality reproduction, made in Germany
  • colour: grey
  • fit for all Trabant 601 and 1,1
  • Limousine and station wagon
  • delivery as one piece (7m)
  • one set will be needed
Price: 4,29 Euro / Meter
30,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 542

PVC-section for cover moulding, complete for one car, 7 meter, BLUE

One komplett set of lue plastic profile for mounting inside the aluminum stripes along the front / rear fenders and doors.
Good quality reproduction, made in Germany
  • colour: blue
  • fit for all Trabant 601 and 1,1
  • Limousine and station wagon
  • delivery as one piece (7m)
  • one set will be needed
Price: 4,29 Euro / Meter
30,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 543

PVC-section for cover moulding, complete for one car, 7 meter, RED

One komplett set of red plastic profile for mounting inside the aluminum stripes along the front / rear fenders and doors.
Good quality reproduction, made in Germany
  • colour: red
  • fit for all Trabant 601 and 1,1
  • Limousine and station wagon
  • delivery as one piece (7m)
  • one set will be needed
Price: 4,29 Euro / Meter
30,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 544

PVC-section for cover moulding, complete for one car, 7 meter, GREEN

One komplett set of green plastic profile for mounting inside the aluminum stripes along the front / rear fenders and doors.
Good quality reproduction, made in Germany
  • colour: green
  • fit for all Trabant 601 and 1,1
  • Limousine and station wagon
  • delivery as one piece (7m)
  • one set will be needed
Price: 4,29 Euro / Meter
30,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 545

Plastic protection, wire tap

Plastic hose to protect the electrical wires at the mounted metal taps at the car body. Trabant engine compartment, car boot, passenger room.
  • PVC, lack
  • price per meter
6,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7675
The complete offer in spare parts for the car body Trabant 601

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas