Framo

rubber coolant hose with textile inset (DIN 73411 7/79)

• up to 6 bar
• Inner diameter: 15 mm (0,59 inch)
• Thickness of wall: 3,5 mm (0,138 inch)
• up to 125°C
• Outer layer (EPDM): resistance to oil, ozone and aging through heat
• Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Deliverable as yard goods. If order two pieces of this article we will deliver one piece with a length of two Meter.

rubber coolant hose with textile inset (DIN 73411 issue 1955)

• working pressure: 3 bar
• Inner diameter: 25 mm (1 inch)
• Thickness of wall: 3,5 mm (0,138 inch)
• Outer and inner layer made of black SBR-rubber quality
• resistant against hot water with antifreeze admixture from -20°C up to +95°C

Only obtainable in pieces of one Meter.

Rubber coolant hose with textile inset (DIN 73411 7/79)

• bup to 6 bar
• Inner diameter: 25 mm (1 inch)
• Thickness of wall: 4,5 mm (0,177 inch)
• up to 125°C
• Outer layer (EPDM): resistance to oil, ozone and aging through heat
• Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Only obtainable in pieces of one Meter.

Dynamo for vehicles with 6V direct current.
Fit to the folloing cars: : Trabant, Wartburg 311, 312 und Framo.

• new spare part (original-IFA-part)
• type: 220W
• scope of delivery without belt pulley

mostly the generator has an external regulator.

External mechanical regulator for use at the DC dynamo to control the battery voltage.
Fit to Trabant 500, 600 and 601, Framo, Wartburg 311
Original spare part.

• voltage: 6V
• use for DC dynamo: 220W
• made in Germany

External mechanical regulator for use at the DC dynamo to control the battery voltage.
Fit to Trabant 500, 600 and 601, Framo, Wartburg 311
Original spare part.

• voltage: 12V
• use for DC dynamo: 220W
• made in Germany