This site in german: IFA-Fahrzeuge > Multicar M24 > Motor - Getriebe 
You are here: > IFA-vehicles> Multicar M24> Engine - Gear box

Engine - Gear box

The complete offer in Engine - Gear box

Friction surface for clutch disc (W353/B1000/M24)

Set of two pieces friction surfaces for clutches 180mm diameter.
Best for self made at the worn out clutch disc.
Fit for all variants of Wartburg 353 (without vintage limit), for Barkas B1000 (vintage up to 02/1985) and also for Multicar M24
  • size: 180x124x3,5mm
  • complete pree drilled
  • made in germany
Made in Germany
52,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7672

Clutch disk (W353/B1000/M24), Made in Germany

clutch disc with springs

fit for all variants of Wartburg 353, for Barkas B1000 (vintage up to 02/1985) and also for Multicar M24
diameter: 180 mm
Please note:

Exchange part

Delivery only in exchange, you have to ship one overhaulable clutch disk in advance !
Overhauled in GermanyDelivery only in exchange, you have to ship one overhaulable clutch disk in advance !
135,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3100

Oelfilter for M24 and M25

Oel filter fit to all Multicar type M24 and M25 (with Cunewlad engine)
  • incl. sealing ring
  • made in Germany
  • one piece will be needed
  • outside diameter: 93mm
  • thread: 3/4-16 UNF
  • length: 95mm
9,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8009

Petrol filter insert for M24 and M25

Fuel filter fit to all Multicar type M24 and M25 (with Cunewlad engine)
  • incl. sealing rings
  • made in Germany
  • one piece will be needed
11,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8008

Petrol filter for M24 and M25

Fuel filter fit to all Multicar type M24 and M25 (with Cunewlad engine)
  • incl. sealing rings
  • made in Germany
  • one piece will be needed
11,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8278

Clutch set *W353* (for vintage up to 05/1985) , made in EU

If the clutch slips during driving with 3. or 4. gear, the clutch components have to change.

This low buged clutch set fits to all variants of Multicar M24

content:

  • 1x 180mm clutch with additional thrust bearing for old version of release bearing
  • 1x 180mm cluch disc with springs

All parts were imported from (mostly east European) foreign countries. The Quality of these parts are incomparable to the quality of parts made in Germany. The working life could be lower, the meantime between failure could be lower, because the materials have not the same quality.
Made in EU
94,25 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6557

closure for compensating tank

Cap with core thread for coolant fluid bottle of Trabant 1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 and B1000-1, Multicar M24 and M25 with Cunewald engine.
  • delivery as an single part
  • material:plastic
  • new repoduction
  • one piece will be needed
8,82 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6645

compensating reservoir (W353/B1000/M25)

Coolant compensating reservoir with one gland on bottom.

This coolant reservoir is suitable for follow car types:
  • Wartburg 353
  • B1000 (only 2-stroke)
  • Multicar M25

Suitable accessory:
48,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6728

Sealing compensating reservoir / blow off valve

Special sealing ring between the blow off valve and coolant compensating reservoir.
This part is an new production made of ur own manufactured tool.
  • material: heater fluid,Glysantin restistant rubber
  • delivery as single part, without any mounting parts
  • one piece will be needed

This sealing fit to coolant reservoir (W353/B1000/M25) and coolant reservoir
as well for
an dem blow off valve 50kPa, blow off valve 100kPa and blow off valve 130kPa
This sealing is suitable for follow car types:
  • Trabant 1.1
  • Wartburg 353
  • Wartburg 1.3
  • B1000 and B1000-1
  • Multicar M25

Suitable accessory:
5,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8474

blow off valve for compensating reservoir, 50kPa

Blow off valve for coolant compensating reservoir of the Multicar M24 and M25.
It will be mounted inside reservoir cap.
  • pressure: 50kPa
  • one piece will be needed
  • made in EU
20,53 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8480
The complete offer in Engine - Gear box

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Kaspertheater