This site in german: IFA-Fahrzeuge > Multicar M25 > Bremsanlage 
You are here: > IFA-vehicles> Multicar M25> Brake system

Brake system

The product category IFA-vehicles > Multicar M25 > Brake system is spread over 3 sites:

Sleeve set for brake master cylinder (1-circuit) Ø 25,4mm = 1

Two sealing rings for the wheel brake cylinders built in front brake of Wartburg 311.
  • for diameter of piston: 25,4 mm
  • scope of delivery: two piece of ring sleeve
  • one piece is needed for each wheel brake cylinder
  • first-class quality made in Germany
19,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7176

Sleeve kit dual brake master cylinder Ø 28mm (1,1″) , original, M25

Sleeve set to repair the dual brake master cylinder used in mini truck Multicar M25 and 2t-trailer fit to Multicar.
complete set with:
  • 4x sealing rings with outer lip
  • 2x flat rubber valves
  • 2x conical rubber valves
  • 4x copper sealing rings

  • made in Germany
  • one set will be needed
19,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7236

Dual brake master cylinder for Multicar M24, M25, 2t-trailer

This tandem brake master cylinder is complete overhauled in Germany.
Used at the mini truck Multicar M25 and some types of M24 and 2t-trailer fit to Multicar.
  • exchange part
  • refreshed in Germany
  • one piece will be needed
The old brake master cylinder have to be shiped to our company in advance!
122,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7633

Sleeve set dual brake master cylinder Ø 25,4mm (1″) , original, M25

Sleeve set dual brake master cylinder, Multicar M25
complete set
  • made in Germany
  • one set will be needed
19,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7187

Sleeve set dual brake master cylinder, complete, M25 Ø 25,4mm

Sleeve set dual brake master cylinder, Multicar M25
complete set
  • made in EU
  • one set will be needed
12,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7186

Front brake system for Multicar M25

Wheel brake cylinder front, fit to Multicar M25, overhauled

In germany refreshed brake cylinder can be used for the front wheel brake system of the Multicar type M25.
The wheel brake cylinders fit to the brakes of the right and left front axle.
  • delivery as an single part inclusive bleeder screw
  • overhauled in Germany
  • for one vehicle four pieces will be needed
Please note: Only direct exchenge possible.Please send your old overhaulable brake cylinder LZ65 to our company in advance !
36,06 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7773

Wheel brake cylinder front, fit to Multicar M25

Brake cylinder can be used for the front wheel brake system of the Multicar type M25.
The wheel brake cylinders fit to the brakes of the right and left front axle.
  • delivery as an single part inclusive bleeder screw
  • made in EU
  • for one vehicle four pieces will be needed
36,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7585

Bleeder screw for frontwheel brake cylinder

Bleeder screw for the front brake cylinders of the truck Multicar M25.
  • thread: M8x1,25
  • spanner gap: SW9
  • total length: 49 mm
  • thread length: 15 mm
  • length of the spanner gap: 7,6 mm
  • one piece will be needed for each wheel brake cylinder
3,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7775

Brake hose front axle for Multicar

Wheel brake hose for the front brake system of the Multicar type M22, M24, M25 (not useable for M25 4WD).
Connection hose between the brake pipe and the wheel brake cylinder front right or left axle side.
  • total lenght: 51cm
  • thread: 1x M12 x 1,5 core thread
  • 1x M12 x 1,5 male thread
  • delivery as an single part
  • made in EU
  • for one vehicle two pieces will be needed
9,48 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7518
The product category IFA-vehicles > Multicar M25 > Brake system is spread over 3 sites:
123
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2018 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas