This site in german: IFA-Fahrzeuge > Wartburg 311 / 312 / 313 > Bremse 
You are here: > IFA-vehicles> Wartburg 311 / 312 / 313> Brake system

Brake system

The product category IFA-vehicles > Wartburg 311 / 312 / 313 > Brake system is spread over 4 sites:

Wheel brake cylinder original front axle, right, W311

Complete in Germany overhauled wheel brake cylinder.
Type: RENAK CZ 25
Shipping only after your old brake cylinder with the mark RENAK CZ 25 was send to our company.
Wheel brake cylinder for Wartburg 311 front, brake system drum brake.
scope of delivery:
  • complete with ring sleeves and piston
  • without bleeder screw
  • brake-piston D= 27mm
  • brake line connection with thread M12x1
  • NOT fit to brake system of Multicar M24
  • 2 pieces will be needed

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
46,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6010

Wheel brake cylinder original front axle, left, W311

Complete in Germany overhauled wheel brake cylinder.
Type: RENAK CZ 25
Shipping only after your old brake cylinder with the mark RENAK CZ 25 was send to our company.
Wheel brake cylinder for Wartburg 311 front, brake system drum brake.
scope of delivery:
  • complete with ring sleeves and piston
  • without bleeder screw
  • brake-piston D= 27mm
  • brake line connection with thread M12x1
  • NOT fit to brake system of Multicar M24
  • 2 pieces will be needed

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
46,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6011

Sealing cap for wheel brake cylinder, front axle W311

Sealing rubber for the wheel brake cylinders front brake of Wartburg 311.
Protection against moisture and brake dust.
  • for diameter of piston: 27 mm
  • four pieces will be needed
6,53 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7751

Sealing ring for wheel brake cylinder, front axle W311 (1 pair = 2 pieces)

Two sealing rings for the wheel brake cylinders built in front brake of Wartburg 311 and 313 all body types.
Best use for replacment of worn out sealing rubbers.
New reproduction made in Germany.
16,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6012

Wheel brake cylinder EU front axle, left, W311

Complete in Europe reproducted wheel brake cylinder.
scope of delivery:
  • complete with ring sleeves and piston
  • without bleeder screw
  • brake-piston D= 25mm
  • brake line connection with thread M12x1
  • NOT fit to brake system of Multicar M24
  • 2 pieces will be needed
41,77 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7845

Wheel brake cylinder EU front axle, right, W311

Complete in Europe reproducted wheel brake cylinder.
scope of delivery:
  • complete with ring sleeves and piston
  • without bleeder screw
  • brake-piston D= 25mm
  • brake line connection with thread M12x1
  • NOT fit to brake system of Multicar M24
  • 2 pieces will be needed
41,77 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7846

Dust cap original for front wheel brake cylinder

Now we are able to offer you sleeves for the repair of the wheelbrake cylinder front left hand or wheelbrake cylinder front right hand of the Wartburg 353 with drum brake system at the front axle and some types of Wartburg 312.
This is the best alternative to the poor Eu sleeves.
The selaing caps are new made at the orignal tools (original producer).
  • delivery as an single part
  • for each wheelbrake side (two wheelbrake cylinders) two pieces will be needed
  • total 4 pieces will be needed
  • for brake diameter: 25,4 mm (1 Zoll)
  • made in Germany
  • the sealing ring fit to the left and the right brake cylinders

The sleeves should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.
8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8185

Ring sleeve original for front wheel brake cylinder

Now we are able to offer you sleeves for the repair of the wheelbrake cylinder front left hand or wheelbrake cylinder front right hand of the Wartburg 353 with drum brake system at the front axle and some types of Wartburg 312.
This is the best alternative to the poor Eu sleeves.
The selaing rubbers are new made at the orignal tools (original producer).
  • delivery as an single part
  • for each wheelbrake side (two wheelbrake cylinders) two pieces will be needed
  • total 4 pieces will be needed
  • for brake diameter: 25,4 mm (1 Zoll)
  • made in Germany
  • the sealing ring fit to the left and the right brake cylinders

The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.
8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8184

Sleeve set original for front wheel brake cylinder

Now we are able to offer you sleeves for the repair of the wheelbrake cylinder front left hand or wheelbrake cylinder front right hand of the Wartburg 353 with drum brake system at the front axle and some types of Wartburg 312.
This is the best alternative to the poor Eu sleeve sets.
All rubber parts are new made at the orignal tools (original producer).
The set consist of:
  • 2 pieces of ring sleeves
  • 2 pieces of dust caps
  • for each wheelbrake side (two wheelbrake cylinders) one set will be needed
  • total 2 sets will be needed
  • for brake diameter: 25,4 mm (1 Zoll)
  • made in Germany
  • the kit fit to the left and the right brake cylinders

The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.
19,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8183

Brake shoe set 50mm, Wartburg 311

One set of brake shoes complete, with lining, inclusive four pieces.
Brake shoe wide: 50mm
Brake drum diameter: 230mm.
Fit to Wartburg 311, 312 and 313 for the front and rear brake system.
  • One set will be needed
  • made in EU
45,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7818
The product category IFA-vehicles > Wartburg 311 / 312 / 313 > Brake system is spread over 4 sites:
1234
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas