This site in german: IFA-Fahrzeuge > Wartburg 311 / 312 / 313 > Bremse 
You are here: > IFA-vehicles> Wartburg 311 / 312 / 313> Brake system
Navigation

Brake system

The complete offer in Brake system

Wheel brake cylinder original front axle, right, W311

Complete in Germany overhauled wheel brake cylinder.
Type: RENAK CZ 25
Shipping only after your old brake cylinder with the mark RENAK CZ 25 was send to our company.
Wheel brake cylinder for Wartburg 311 front, brake system drum brake.
scope of delivery:
  • complete with ring sleeves and piston
  • without bleeder screw
  • brake-piston D= 27mm
  • brake line connection with thread M12x1
  • NOT fit to brake system of Multicar M24
  • 2 pieces will be needed

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
46,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6010

Wheel brake cylinder original front axle, left, W311

Complete in Germany overhauled wheel brake cylinder.
Type: RENAK CZ 25
Shipping only after your old brake cylinder with the mark RENAK CZ 25 was send to our company.
Wheel brake cylinder for Wartburg 311 front, brake system drum brake.
scope of delivery:
  • complete with ring sleeves and piston
  • without bleeder screw
  • brake-piston D= 27mm
  • brake line connection with thread M12x1
  • NOT fit to brake system of Multicar M24
  • 2 pieces will be needed

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
46,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6011

Sealing cap for wheel brake cylinder, front axle W311

Sealing rubber for the wheel brake cylinders front brake of Wartburg 311.
Protection against moisture and brake dust.
  • for diameter of piston: 27 mm
  • four pieces will be needed
6,53 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7751

Sealing ring for wheel brake cylinder, front axle W311 (1 pair = 2 pieces)

Two sealing rings for the wheel brake cylinders built in front brake of Wartburg 311 and 313 all body types.
Best use for replacment of worn out sealing rubbers.
New reproduction made in Germany.
16,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6012

Wheel brake cylinder EU front axle, left, W311

Complete in Europe reproducted wheel brake cylinder.
scope of delivery:
  • complete with ring sleeves and piston
  • without bleeder screw
  • brake-piston D= 25mm
  • brake line connection with thread M12x1
  • NOT fit to brake system of Multicar M24
  • 2 pieces will be needed
41,77 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7845

Wheel brake cylinder EU front axle, right, W311

Complete in Europe reproducted wheel brake cylinder.
scope of delivery:
  • complete with ring sleeves and piston
  • without bleeder screw
  • brake-piston D= 25mm
  • brake line connection with thread M12x1
  • NOT fit to brake system of Multicar M24
  • 2 pieces will be needed
41,77 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7846

Dust cap original for front wheel brake cylinder

Now we are able to offer you sleeves for the repair of the wheelbrake cylinder front left hand or wheelbrake cylinder front right hand of the Wartburg 353 with drum brake system at the front axle and some types of Wartburg 312.
This is the best alternative to the poor Eu sleeves.
The selaing caps are new made at the orignal tools (original producer).
  • delivery as an single part
  • for each wheelbrake side (two wheelbrake cylinders) two pieces will be needed
  • total 4 pieces will be needed
  • for brake diameter: 25,4 mm (1 Zoll)
  • made in Germany
  • the sealing ring fit to the left and the right brake cylinders

The sleeves should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.
8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8185

Ring sleeve original for front wheel brake cylinder

Now we are able to offer you sleeves for the repair of the wheelbrake cylinder front left hand or wheelbrake cylinder front right hand of the Wartburg 353 with drum brake system at the front axle and some types of Wartburg 312.
This is the best alternative to the poor Eu sleeves.
The selaing rubbers are new made at the orignal tools (original producer).
  • delivery as an single part
  • for each wheelbrake side (two wheelbrake cylinders) two pieces will be needed
  • total 4 pieces will be needed
  • for brake diameter: 25,4 mm (1 Zoll)
  • made in Germany
  • the sealing ring fit to the left and the right brake cylinders

The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.
8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8184

Sleeve set original for front wheel brake cylinder

Now we are able to offer you sleeves for the repair of the wheelbrake cylinder front left hand or wheelbrake cylinder front right hand of the Wartburg 353 with drum brake system at the front axle and some types of Wartburg 312.
This is the best alternative to the poor Eu sleeve sets.
All rubber parts are new made at the orignal tools (original producer).
The set consist of:
  • 2 pieces of ring sleeves
  • 2 pieces of dust caps
  • for each wheelbrake side (two wheelbrake cylinders) one set will be needed
  • total 2 sets will be needed
  • for brake diameter: 25,4 mm (1 Zoll)
  • made in Germany
  • the kit fit to the left and the right brake cylinders

The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.
19,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8183

Brake shoe set 50mm, Wartburg 311

One set of brake shoes complete, with lining, inclusive four pieces.
Brake shoe wide: 50mm
Brake drum diameter: 230mm.
Fit to Wartburg 311, 312 and 313 for the front and rear brake system.
  • One set will be needed
  • made in EU
45,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7818

Rivet bolt for hand-brake lever

Rivet bolt for mounting the hand brake lever at the rear brake shoe (short lining).
Fit to Tarabant 601 and Trabant 1,1 rear axle, Wartburg 311,312,353,1.3 and Anhänger wie Qek, Intercamp, Oase, Camptorist, Klappfix.
  • material: steel, galvaniced
  • one piece for each rear brake
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 183

Bleeder screw, M12x1

Bleeder screw for many IFA vehicles. Tap M12 x 1 with selaing cone 90 degrees.
Fit to:
  • Barkas B1000
  • Barkas B1000-1
  • Multicar M22
  • Multicar M24
  • Multicar M25
  • Wartburg 311 and 313
4,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6121

Bleeder screw cap

fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
  • material: rubber
  • made in Germany
0,65 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 215
Wheel clinder and sealings Wartburg 311 rear axle

Wheel brake cylinder rear, original

Complete in Germany overhauled rear wheel brake cylinder with cap sleeves, brak-piston D=25,35mm.
Mark: IFA BHL
Fit to Wartburg 311
  • scope of delivery: inclusive cap sleeves and bleeder screw
  • break piston diameter: 25,35mm
  • also used for some IFA-vehicles
  • two pieces will be needed

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
39,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7252

Wheel brake cylinder, rear

Rear wheel brake cylinder with double brake pistins for the raer axle Barkas B1000, B1000-1, Wartburg 311,313 and Multicar M24
The brake cylinders will be complete modificated and mounted as an complete unit with original sealings.
additional needed parts:
2x LDM-part.no.:7793 mounting screw wheel brake cylinder
LDM-part.no.:6081 bleeder screw wheel brake cylinder
  • delivery as an single part, tow pieces will be needed for each car
  • delivery without mounting screws (LDM-Art-Nr.7793), without bleeded screw (LDM-part.no.6081)
39,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 4207

Ring sleeve, rear axle 25,35mm, original

Original ring sleeve set for rear wheel brake cylinder type: CZ5.
Fit to all models of: Multicar M22, Barkas, Wartburg 311, 312, 313 and Wartburg 353 with brake drum system at the front axle.
  • fit to brake cylinder diameter 25,35mm
  • Comlete set for one wheel brake cylinder: 2x cap sleeve, 2x dust cap
  • all rubber seals ar mad in Germany
  • material: break fluid resistant rubber
  • One set will be needed for each wheel side rear
18,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7232

Brake hose, front and rear axle

Flexible brake hose for the Wartburg 311 drum brake.
Reproducion of this brake hose, made at an current production in best quality.
  • total length: 49 cm
  • tap: 1x M12 x 1,5 core thread and 1x M12 x 1,5 male thread
  • for the front axle two pieces will be needed and one for the rear axle
15,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6769

retainer for brake hose

Brake hose retainer for Wartburg 311
  • to put into the circumferential slot of the brake hose fitting
  • fit or all types of W311
  • for one vehicle you need four pieces
  • slot wide: 14 mm
  • thickness: 1,75 mm
5,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7168

Brake master cylinder, 1 circle

Complete in Germany overhauled brake master cylinder.
Type: Renak CH 7
  • Brake master cylinder, 1 circle for Barkas B1000, Mulicar M22, Mulicar M24, ZT, 3to-Stapler, Warburg 311,312,313, Framo
  • piston diameter: 25,4mm

Details about the exchange parts:
This spare part we can only deliver in direct exchange.
Please send one overhaulable Brake master cylinder two-circle (original IFA production), case type: Renak to our company in advance. After checking the delivered parts for the possibility of overhauling we will send you the prepaid invoice.
Overhaul part, please send this part in advance to our company for refresh.
168,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7221

Sleeve set for brake master cylinder (1-circuit) Ø 25,4mm = 1

Two sealing rings for the wheel brake cylinders built in front brake of Wartburg 311.
Case mark: Renak CH 7
  • for diameter of piston: 25,4 mm
  • scope of delivery: two piece of ring sleeve
  • one piece is needed for each wheel brake cylinder
  • first-class quality made in Germany
35,44 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7176

Pipe master brake cylinder - plastic reservoir (400mm)

Connection hose from brake fluid reservoir to 1-circle master brake cylinder
length: 400 mm
Can be used for Warburg 311, 312 and 313.
  • material: brake fluid resisant rubber
  • colour: black
  • one piece needed
price: 9,58 Euro per Meter
3,83 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8107

Universal brake line, CUNIFER 5m, 6mm

Brakepipeline 6 x 0,7 mm
made of NiCuFe
length: 5m
for B1000, B1000-1, Mulicar M22, M24, M26, Framo, Warburg 311 and 313
price for each meter: 8,60 €/m
42,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7398

Screw-cap for brakeline 6 x 0,7

Screw-cap for brakeline 6mm x 0,7mm. The screws can be mounted at steel or nickel-copper brake lines.
Please count how much pieces zou need total.
Fit to Wartburg 311, 312, 313.
  • border: type E
  • thread: M12x1
  • material: steel, galvaniced
  • made in Germany
1,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8111

distributor

T- junction for the rear brake lines.

material: brass
thread : M12 X 1
mounting-diameter: 8,4 mm
11,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8112

Rubber lining made in Germany for brake and clutch pedal-shaft

Rubber pad for the clutch and brake pedal.
New reproduction made in Germany in brilliant quality.
Fit to many IFA cars like Trabant, P70/F8, Wartburg 311,312, 313 and Multicar...
  • material: rubber, black
  • made in Germany
  • best quality
  • two pieces will be needed
Part-no.: 3091141170
8,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8113

Brake line, front rigth hand

Brake pipe for the front wheel brake system of Wartburg 311,312,313.
Mounting place Y-junction brake master cylinder - to brake hose retainer font axle right hand.
Material: Copper nickel, diameter 6mm
Length: 675mm
This brake line is fabricated inclusive two cap nuts and flanged on both ends.
Please note: this tube is NOT in form curved. It can formed easily by hand.
parts-no. from spare parts catalogue: 3110175020
13,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8115

Brake line, front left hand

Brake pipe for the front wheel brake system of Wartburg 311,312,313.
Mounting place Y-junction brake master cylinder - to brake hose retainer font axle left hand.
Material: Copper nickel, diameter 6mm
Length: 415mm
This brake line is fabricated inclusive two cap nuts and flanged on both ends.
Please note: this tube is NOT in form curved. It can formed easily by hand.
parts-no. from spare parts catalogue: 3110175030
11,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8114

Protection bellows for pressure bar input brake master cylinder

Protection bellows for the single and tandem brake master cylinders.
fit ot vehicles: Framo, B1000, B1000-1, Wartburg 311, 312, 313, 353, Multicar M22, M24, M25.

inner diameter conical end: 15 mm
inner diameter cylindrical end: 37 mm
length: 35 mm - 58 mm
9,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4214

Sealing plate for hand brake lever (W353/W1.3)

Sealing plate for hand brake lever mounted at the care frame - body.
Fit to all variants of Wartburg 311, 312, 313, 353 und 1.3 (4-takt)
This part is an new reproduction, best replacement for the original one. Made from our own produced moulding tool.
  • material: oel and grease resistant rubber (NBR), colour black
  • Reproduction in best quality
  • made in Germany
  • one piece will be needed for each car
27,80 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7004

Brake line set, Wartburg 353 und 312 drum brake, CUNIFER

One brake pipe set made of Nickel-Copper-Iron-alloy.
Set type: for Wartburg 353 and 312 all models with drum brake system at the front axle.
Brilliant exchange for old steel lines. Easy to mount, the bending can be done by hand without much pressure. The set comes with outhlet nuts and complete flanged.
  • scope of delivery: one set
  • beanded with nuts
  • fit to Wartburg 353 and 312
  • made in Germany
  • one set will be needed
82,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8350

Brake line set, Wartburg 353 and 312 drum brake, steel

One brake pipe set made like original with steel tube.
Set type: for Wartburg 353 and 312 all models with drum brake system at the front axle.
The mounting require some skills and for bending of small curves an brake pipe bender will be an brillant auxiliary.
The set comes with outhlet nuts and complete flanged.
  • scope of delivery: one set
  • beanded with nuts
  • fit to Wartburg 353 and Wartburg 312
  • made in Germany
  • one set will be needed
72,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8349

Bleeder screw cap with tongue

Rubber cap with additional tongue fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
The flap kibosh loosing the complete cap.
  • material: brake fluid resistant rubber
  • made in EU
1,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8446

Brake master cylinder 25,4mm, 1 circle, Reproduction

Brake master cylinder as reproduction of the Renak CH 7.
New production made in EU.
Selling without exchange part.
  • Brake master cylinder, 1 circle for Barkas B1000, Mulicar M22, Mulicar M24, ZT, 3to-Stapler, Warburg 311,312,313, Framo
  • piston diameter: 25,4mm
  • delivery without mounting parts
Reproduction spare part
156,13 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 8502
The complete offer in Brake system

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas