This site in german: IFA-Fahrzeuge > Framo > Kraftstoffsystem 
You are here: > IFA-vehicles> Framo> Fuel sytem

Fuel sytem

The product category IFA-vehicles > Framo > Fuel sytem is spread over 4 sites:

Carburettor Framo 1000ccm

Complete overhauled Carburettor for the three cylinder Framo engine with 1000 ccm
cylinder capacity ( Barkas V901 ). Delivery without intake pipe.
Carburettor type: H 362-12
{[high quality from Germany]}
Please note, we can only exchange you this spare part if you ship 1x carburettor H 362-12 to our company in advance!
145,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7029

Sealing set Carburettor H362

Paper sealing kit for carburettor type H 362- for Framo, Wartburg 311, 312, 313 and some boat engines with this carburettor type.
Best use to refresh the carburettor. All parts are made from the orignial patterns and our own quality grade.
Set consist of:

  • one set will be needed
  • material: sealing paper, Vulkanfieber, fuel resistant rubber
  • high quality made in Germany
14,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8266

Sealing ( carburettor-flange )

Paper sealing between Carburettor suction pipe.
Carburettor type: H 362-24 and Carburettor type: H 362-12
{[high quality from Germany]}
1,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7124

Sealing carburettor-case

Paper sealing for the case of the float Carburettor for Wartburg 311 and Framo.
Carburettor type: H 362-24 and Carburettor type: H 362-12
{[high quality made in Germany]}
2,34 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7541

Upper sealing ring carburettor float case 24,2 x 29,8 x 1,5

Special made fiber sealing as single part for sealing the float case on top to the carburettor.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 24,2mm
  • outside diameter: 29,8mm
  • thickness: 1,5mm
  • one piece will be needed
2,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8157

Lower sealing ring carburettor float case 20,2 x 25 x 1,5

Special made fiber sealing as single part for sealing the float case bottom side to the carburettor.(Screw)
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 20,2mm
  • outside diameter: 25mm
  • thickness: 1,5mm
  • one piece will be needed
2,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8158

Sealing ring carburettor air adjustment slide jet 8 x 11 x 1,0

Special made fiber sealing as single part for sealing the brass air adjustment slide jet to the carburettor (left hand).
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 8,2mm
  • outside diameter: 11mm
  • thickness: 1,0mm
  • two pieces will be needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8170

Sealing ring carburettor air adjustment slide jet 6 x 9 x 1,0

Special made fiber sealing as single part for sealing the brass air adjustment slide jet to the carburettor (right hand)
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 6,1mm
  • outside diameter: 9mm
  • thickness: 1,0mm
  • one piece will be needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8171

Sealing ring carburettor blowpipe main jet 11 x 15 x 1,0

Special made fiber sealing as single part for sealing the brass blowpipe for the main jet to the carburettor.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 11.1mm
  • outside diameter: 15,1mm
  • thickness: 1,0mm
  • one piece will be needed
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7974
The product category IFA-vehicles > Framo > Fuel sytem is spread over 4 sites:
1234
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2018 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas