This site in german: IFA-Fahrzeuge > Framo > Kraftstoffsystem 
You are here: > IFA-vehicles> Framo> Fuel sytem
Navigation

Fuel sytem

The complete offer in Fuel sytem

Carburettor Framo 1000ccm

Complete overhauled Carburettor for the three cylinder Framo engine with 1000 ccm
cylinder capacity ( Barkas V901 ). Delivery without intake pipe.
Carburettor type: H 362-12
{[high quality from Germany]}
Please note, we can only exchange you this spare part if you ship 1x carburettor H 362-12 to our company in advance!
329,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7029

Float needle valve, carburettor H 362

Special made float needle valve for the carburettor type H 362-.
This is en new german reproduction.
Spanner gap SW14 and threat M12.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
  • delivery as single part
  • without without sealing
  • material: brass
  • threat: M12
  • one piece will be needed
27,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8586

Sealing for float needle valve, carburettor H 362

Special made fiber sealing ring for float needle valve (LDM-part-no.:8586) for the carburettor type H 362-.
This is en new german reproduction.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
  • delivery as single part
  • material: fiber sealing
  • one piece will be needed
3,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8619

Sealing set Carburettor H362

Paper sealing kit for carburettor type H 362- for Framo, Wartburg 311, 312, 313 and some boat engines with this carburettor type.
Best use to refresh the carburettor. All parts are made from the orignial patterns and our own quality grade.
Set consist of:

  • one set will be needed
  • material: sealing paper, Vulkanfieber, fuel resistant rubber
  • high quality made in Germany
18,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8266

Sealing ( carburettor-flange )

Paper sealing between Carburettor suction pipe.
Carburettor type: H 362-24 and Carburettor type: H 362-12
{[high quality from Germany]}
3,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7124

Sealing carburettor-case

Paper sealing for the case of the float Carburettor for Wartburg 311 and Framo.
Carburettor type: H 362-24 and Carburettor type: H 362-12
{[high quality made in Germany]}
4,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7541

Upper sealing ring carburettor float case 24,2 x 29,8 x 1,5

Special made fiber sealing as single part for sealing the float case on top to the carburettor.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 24,2mm
  • outside diameter: 29,8mm
  • thickness: 1,5mm
  • one piece will be needed
2,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8157

Lower sealing ring carburettor float case 20,2 x 25 x 1,5

Special made fiber sealing as single part for sealing the float case bottom side to the carburettor.(Screw)
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 20,2mm
  • outside diameter: 25mm
  • thickness: 1,5mm
  • one piece will be needed
2,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8158

Sealing ring carburettor air adjustment slide jet 8 x 11 x 1,0

Special made fiber sealing as single part for sealing the brass air adjustment slide jet to the carburettor (left hand).
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 8,2mm
  • outside diameter: 11mm
  • thickness: 1,0mm
  • two pieces will be needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8170

Sealing ring carburettor air adjustment slide jet 6 x 9 x 1,0

Special made fiber sealing as single part for sealing the brass air adjustment slide jet to the carburettor (right hand)
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 6,1mm
  • outside diameter: 9mm
  • thickness: 1,0mm
  • one piece will be needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8171

Retainer for main jet, carburettor H 362

Holder for main jet of the carburettor type H 362-.
This is en new german reproduction. Nozzle threat M5.
Spanner gap SW14 and threat M11.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
  • delivery as single part
  • without jet and without sealing
  • material: brass
  • threat: M10x1
  • one piece will be needed
15,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8579

Sealing ring carburettor blowpipe main jet 11 x 15 x 1,0

Special made fiber sealing as single part for sealing the brass blowpipe for the main jet to the carburettor.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 11.1mm
  • outside diameter: 15,1mm
  • thickness: 1,0mm
  • one piece will be needed
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7974

Sealing ring carburettor blowpipe jet

Special made rubber sealing as single part to seal the aluminuim blowpipe jet inside of the carburettor.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • material: fuel resitant rubber
  • one piece will be needed
2,65 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8172

Ring eye D12mm, connection 6mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
  • Eye diameter: 12mm
  • diameter pipe connection: 6mm
4,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7539

Ring eye D12mm, connection 8mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
  • Eye diameter: 12mm
  • diameter pipe connection: 8mm
5,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7540

Ring eye D12mm with pipe bend

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
  • Eye diameter: 12mm
  • diameter pipe connection: 8mm
  • pipe bend: 90 degree
  • pipe length total: 74mm
15,38 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7517

Ring eye D10mm with pipe bend

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
  • Eye diameter: 10mm
  • diameter pipe connection: 6mm
  • pipe bend: 90 degree
  • pipe length total: 55mm
14,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7516

Ring eye D10mm, connection 6mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
  • Eye diameter: 10mm
  • diameter pipe connection: 6mm
4,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7537

Ring eye D10mm, connection 8mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
  • Eye diameter: 10mm
  • diameter pipe connection: 8mm
4,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7538

fuel pipe-return, 6mm, copper pipe

Copper tube to use as fuel pipe to connect the fuel pump and the fuel tank. (return flow line)
  • material: copper tube
  • size: 6x1
  • length: 5 meter
  • one piece will be needed
price per meter: 7,96 Euro
39,79 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 727

Polyamid fuel pipe 6 x 1, price per meter

Fuel line 6 x 1 mm, most vehicles used as rear flow pipe for the petrol pump.
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:6 mm
inner diameter:4 mm
wall thickness:1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
Bitte beachten: abgelängte Ware auf Kundenwunsch, keine Rücknahme oder Umtausch!
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7513

Polyamid fuel line 6 x 1

Fuel line 6 x 1 mm, most vehicles used as rear flow pipe for the petrol pump.
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:6 mm
inner diameter:4 mm
wall thickness:1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
price per meter: 3,20 Euro
16,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7514

Reinforcement bushing for fuel pipe6 x 1

reinforcement bushing for our polyamide fuel pipe 8 x 1 (Art.No.: 7513 and 7514)
material: brass

It should be uesed for every connection between polyamid fuel pipe and fuel hose!
mor informations: see details
0,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7515

Fuel pipe 8mm, copper pipe

Copper tube to use as fuel pipe to connect the fuel tank and the fuel pump. (suction line)
  • material: copper tube
  • size: 8x1
  • length: 5 meter
  • one piece will be needed
Preis pro Meter: 10,91 Euro
54,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 726

Polyamid fuel pipe 8 x 1, price per meter

Fuel line 8 x 1 mm
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:8 mm
inner diameter:6 mm
wall thickness:1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
price 4,80 Euro / meter
4,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6033

Polyamid fuel line 8 x 1

Fuel line 8 x 1 mm
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:8 mm
inner diameter:6 mm
wall thickness:1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
price per meter: 3,80 Euro
19,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6032

Reinforcement bushing for fuel pipe 8 x 1

reinforcement bushing for our polyamide fuel pipe 8 x 1 (Art.No.: 6032 and 6033)
material: brass

It should be uesed for every connection between polyamid fuel pipe and fuel hose!
mor informations: see details
0,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6305

Hose clip 8 - 12 / 7,5 stainless steel

Clip made of stainless steel for fuel hosed from diameter 8mm up to 12mm.
The wide of the clip is 7,5mm.
3,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6034

Hose clip 12 - 20 / 9

for fuel hose from D= 12mm up to 20mm.
the wide of the clip is 9mm.
1,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6036

Fuel hose, 5,5 mm with texture

Flexible fuel hose with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
  • inside diameter: 5,5mm
  • material: petrol resistant rubber with outside texture
  • made in Germany
priece per Meter: 5,14 Euro
5,14 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 728

Hose clip for fuel hose 5,5 mm with texture

Clamp for flexible fuel hose (5,5mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 11mm
  • wide: 9mm
  • re-usable
1,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6197

Hose clip for fuel hose, 8 mm with texture

Clamp fpr flexible fuel hose (5,5mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 12 mm
  • wide: 8,5mm
  • re-usable
1,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6203

Hose clip 7 - 11 / 5 stainless steel

Hose clips made of stainless steel, for fuel hoses from diameter 7mm up to 11mm.
The wide of the clip is 5mm.
2,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6035

Fuel hose, 8 mm (insde diameter)

Flexible fuel hose with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
  • inside diameter: 8 mm
  • material: petrol resistant rubber with outside texture
  • made in Germany
priece per Meter: 6,22 Euro
6,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 729

Hose clip for fuel hose, 8 mm with texture

Clamp fpr flexible fuel hose (8mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 13mm
  • wide: 9mm
  • re-usable
1,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8159

Hose clip for fuel hose, 8 mm with texture

Clamp fpr flexible fuel hose (8mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 13 mm
  • wide: 9,5mm
  • re-usable
1,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8160

Petrol filter universal

Gasoline filter for the universal duty.
The filter will be mounted between the fuel line.
  • connection diameter: 6 and 8mm
  • material: petrol resistant plastic with parer filter
  • price per piece
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7224

Membran for fuel pump Wartburg 311, 312, 313, Framo

Fit for the fuel pump Wartburg 311, 312, 313, Framo
  • 1x membran
  • made in EU
26,24 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8623

Petrol filter 42mm, universal

Gasoline filter for the universal duty.
The filter will be mounted between the fuel line.
  • connection diameter: 6 and 8mm
  • material: petrol resistant plastic with parer filter
  • price per piece
3,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8642
The complete offer in Fuel sytem

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas