This site in german: IFA-Fahrzeuge > Wartburg 311 / 312 / 313 > Bremse 
You are here: > IFA-vehicles> Wartburg 311 / 312 / 313> Brake system

Brake system

The product category IFA-vehicles > Wartburg 311 / 312 / 313 > Brake system is spread over 4 sites:

Pipe master brake cylinder - plastic reservoir (400mm)

Connection hose from brake fluid reservoir to 1-circle master brake cylinder
length: 400 mm
Can be used for Warburg 311, 312 and 313.
  • material: brake fluid resisant rubber
  • colour: black
  • one piece needed
price: 9,58 Euro per Meter
3,83 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8107

Universal brake line, CUNIFER 5m, 6mm

Brakepipeline 6 x 0,7 mm
made of NiCuFe
length: 5m
for B1000, B1000-1, Mulicar M22, M24, M26, Framo, Warburg 311 and 313
price for each meter: 8,60 €/m
42,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7398

Screw-cap for brakeline 6 x 0,7

Screw-cap for brakeline 6mm x 0,7mm. The screws can be mounted at steel or nickel-copper brake lines.
Please count how much pieces zou need total.
Fit to Wartburg 311, 312, 313.
  • border: type E
  • thread: M12x1
  • material: steel, galvaniced
  • made in Germany
1,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8111

distributor

T- junction for the rear brake lines.

material: brass
thread : M12 X 1
mounting-diameter: 8,4 mm
11,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8112

Rubber lining made in Germany for brake and clutch pedal-shaft

Rubber pad for the clutch and brake pedal.
New reproduction made in Germany in brilliant quality.
Fit to many IFA cars like Trabant, P70/F8, Wartburg 311,312, 313 and Multicar...
  • material: rubber, black
  • made in Germany
  • best quality
  • two pieces will be needed
Part-no.: 3091141170
8,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8113

Brake line, front rigth hand

Brake pipe for the front wheel brake system of Wartburg 311,312,313.
Mounting place Y-junction brake master cylinder - to brake hose retainer font axle right hand.
Material: Copper nickel, diameter 6mm
Length: 675mm
This brake line is fabricated inclusive two cap nuts and flanged on both ends.
Please note: this tube is NOT in form curved. It can formed easily by hand.
parts-no. from spare parts catalogue: 3110175020
13,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8115

Brake line, front left hand

Brake pipe for the front wheel brake system of Wartburg 311,312,313.
Mounting place Y-junction brake master cylinder - to brake hose retainer font axle left hand.
Material: Copper nickel, diameter 6mm
Length: 415mm
This brake line is fabricated inclusive two cap nuts and flanged on both ends.
Please note: this tube is NOT in form curved. It can formed easily by hand.
parts-no. from spare parts catalogue: 3110175030
11,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8114

Protection bellows for pressure bar input brake master cylinder

Protection bellows for the single and tandem brake master cylinders.
fit ot vehicles: Framo, B1000, B1000-1, Wartburg 311, 312, 313, 353, Multicar M22, M24, M25.

inner diameter conical end: 15 mm
inner diameter cylindrical end: 37 mm
length: 35 mm - 58 mm
9,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4214

Sealing plate for hand brake lever (W353/W1.3)

Sealing plate for hand brake lever mounted at the care frame - body.
Fit to all variants of Wartburg 311, 312, 313, 353 und 1.3 (4-takt)
This part is an new reproduction, best replacement for the original one. Made from our own produced moulding tool.
  • material: oel and grease resistant rubber (NBR), colour black
  • Reproduction in best quality
  • made in Germany
  • one piece will be needed for each car
19,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7004
The product category IFA-vehicles > Wartburg 311 / 312 / 313 > Brake system is spread over 4 sites:
1234
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas