This site in german: IFA-Fahrzeuge > Multicar M25 > Bremsanlage 
You are here: > IFA-vehicles> Multicar M25> Brake system

Brake system

The product category IFA-vehicles > Multicar M25 > Brake system is spread over 4 sites:

Hand brake cable for Multicar M25

This brake wire fit to Multicar type M25.
New reproduction made in EU
  • length total: 87cm
  • length of bowden wire: 54cm
  • two pieces will be needed
9,37 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8362

Brake shoe set for Multicar M25

The brake shoes kit fit to the frontaxle and to the rear axle of the Multicar type M25 without 4 wheel drive.
Set consist of:
  • 4 pieces of breake shoe with long lining
  • made in EU
  • for each axle, one set will be needed
32,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7096

Brake shoe set front axle Multicar M25 4WD

The brake shoes are complete overhauled in Germany
Fit to the front axleof the Multicar type M25 with 4 wheel drive.
Set consist of:
  • 4 pieces of breake shoe with long lining
  • made in Germany

Please note: the old breake shoes have to be shiped to our compaly in advance.
only exchenge part !
182,39 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7800

Brake drum for Multicar M25

Brake drum as an single part fit to the front wheel and rear wheel brakes for Multicar type M25.
  • delivery as an single part
  • four pieces will be needed
  • made in EU
64,26 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7881

Brake pressure regulatoring valve, complete LAD28 for M25

Brake pressure regulatoring valve to level the right brake perssure at the rear axle depends on the loades weight.
Fit for Multicar M25.
mounting place: between brake pipe and wye junction rear axle.
  • 1x brake pipe connection top end M12x1
  • 1x brake pipe connection side end M12x1
  • new reproduction
  • one piece will be needed

additional needed special tools for deassembly / assembly:
no special tools needed
56,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8360

Distributor for brake lines M24, M25

Terminal block for the brake fluid with three ports to connect the brake tubes or brake pipes. Fit to the cars Mulicar M24 and M25.
  • material: brass
  • thread : M12 X 1
  • mounting-diameter: 8,4 mm
7,73 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7274

pipe-connector

Brake tube merger for the connection of two brake tubes with flange type E and thread M12x1mm
  • material: steel, galvanized
  • thread: M12 X 1
  • lenght: 29mm
  • made in Germany
3,61 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7275

Universal brake line, PVC-coated per 1 m , 6 x 0,7 mm

Brakepipeline 6mm x 0,7mm for Barkas B1000
price per meter.
max. lenght per piece: 5m
3,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6038

Universal brake line 6x0,7 *5m*

Zinced and PVC-plated steel brake line.
Scope of delivery 5 meters.
The pipe can be bent by hand with normal pressure. For the flange on the end of the tubes it will be necessary to use an professional tube border tool.
  • outside diameter: 6mm
  • thickness: 0,7mm
  • length: 5m
  • made in Germany
price per meter: 3,24 €
17,82 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6039
The product category IFA-vehicles > Multicar M25 > Brake system is spread over 4 sites:
1234
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2018 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas